Can-t correctly shutdown and/or hibernate


Recommended Posts

Hey

This might be related to my hibernation issue; Everytime I try to shutdown my OS, it shuts down but the hardware (fans, HDDs, lights, etc) stay on and running. They stay like this forever.

Why is this? This has never happened before and was working a couple of weeks back. I virus scanned and nothing.

What could be wrong?

http://searchenterpr...-wont-shut-down

I find it easier and faster to just search for things myself rather than ask and wait here.

What makes you think it did not search for it myself?

BTW, your solution has NOTHING to do with my question.

Check your bios settings and make sure Standby/Sleep mode is S3 not S1

Yes, the mode S3 is enabled. I havent changed anything in my BIOS.

ACPI driver and Video driver might need to be updated or downgraded if they were recently updated.

Why would a video driver have anything to do with it?

Video drivers have everything to do with sleep/hibernation/shut down!!

Just like the computer I'm on now. Guy is to cheap to buy a decent video card, so computer has no sleep function and I disabled hibernate as that crap thing has ALWAYS caused issues in Winodows since the day it was invented.

I just took a look and it seems to me it has everything to do with your problem

It talks about mainly sleep and hibernation issues, when it does do it and suddenly wakes up. My computer NEVER reaches the point of hibernation and/or shutdown, its fans just keep running never once turning off.

NOTHING to do with my question. Completly differnet issue.

It talks about mainly sleep and hibernation issues, when it does do it and suddenly wakes up. My computer NEVER reaches the point of hibernation and/or shutdown, its fans just keep running never once turning off.

NOTHING to do with my question. Completly differnet issue.

Well he was just trying to help, chances are he didnt read the WHOLE article. You are the one asking for help (3 times over) thats your job to read it. If it doesnt help then try something else. Don't fall out with people for suggesting google.

Here are results one and 2 from my very first google search (Computer shuts down but fans keep running)

http://www.tomshardw...unning-shutdown

Hello,

I have a problem . Even after i shutdown my pc fan still keeps running indefinately, i can still eject and close DVD drives, they aren't powered down!. But monitor is powered down.

http://www.esaw2012....pic.php?id=2397

When I shut down my sons computer, it almost shuts down all the way. Except the cpu and case fans run wide open. The MB lights are still on... The only way to complete the shut down is to turn the power strip off or turn the PSU off.

Now those sound related to your issue to me.

And just incase, here is the google search with many many more results of people with the same problem

https://www.google.c...iw=1280&bih=899

Do a system restore to an earlier date.

Open the system restore wizard an choose a date that the system was working fine. Windows creates restore points every time an update is performed. This comes in handy for when something is not right with the system. This does not delete or remove custom files like docs or game saves.

Well he was just trying to help, chances are he didnt read the WHOLE article. You are the one asking for help (3 times over) thats your job to read it. If it doesnt help then try something else. Don't fall out with people for suggesting google.

Here are results one and 2 from my very first google search (Computer shuts down but fans keep running)

http://www.tomshardw...unning-shutdown

http://www.esaw2012....pic.php?id=2397

Now those sound related to your issue to me.

And just incase, here is the google search with many many more results of people with the same problem

https://www.google.c...iw=1280&bih=899

Um all the links you posted are broken :s

Do a system restore to an earlier date.

Open the system restore wizard an choose a date that the system was working fine. Windows creates restore points every time an update is performed. This comes in handy for when something is not right with the system. This does not delete or remove custom files like docs or game saves.

You sure about that? I think it removed all files made after that point.

Very unless you are doing a factory restore not a windows restore point restore. I have done this multiple times for clients. Back your stuff up to be 100% if you have doubts. During the restore process it even says that it will not remove any data. Read the screens.

first off all, what PSU, motherboard/CPU and graphics card do you have?

when did the issue start happening, or has it always happend since you first had the computer (how long have you had the computer)

was it a custom build you made yourself or is it a store bought computer (make/model if you know it)

if you dont know what components/motherboard/CPU/graphics card you have, try using this:

Speccy:

http://www.piriform.com/speccy

which should identify them.

have you checked on the manufacturers website to see if there is a known issue and a hotfix issued?

After December patch Tuesday, my PC now refuses to shutdown properly. I have to force power it off every time but in my case, I get thrown back to desktop as if I never attempted to shutdown. Does this sound similar?

I haven't found time yet to actually troubleshoot what's causing it.

first off all, what PSU, motherboard/CPU and graphics card do you have?

when did the issue start happening, or has it always happend since you first had the computer (how long have you had the computer)

was it a custom build you made yourself or is it a store bought computer (make/model if you know it)

if you dont know what components/motherboard/CPU/graphics card you have, try using this:

Speccy:

http://www.piriform.com/speccy

which should identify them.

have you checked on the manufacturers website to see if there is a known issue and a hotfix issued?

This has never happened to me before on this same computer with the same software.

After December patch Tuesday, my PC now refuses to shutdown properly. I have to force power it off every time but in my case, I get thrown back to desktop as if I never attempted to shutdown. Does this sound similar?

I haven't found time yet to actually troubleshoot what's causing it.

My issue was similar: I tried to hibernate and the screen would go black then suddenly Id get thrown back to the login screen to input my password. I input try it again and same thing over and over again.......

Could be related issues :s

have you installed any new drivers in the last few months, or remote desktop software?

check in the control panel, device manager to see if any of the sections are open and any drivers in an error state.

would help if you listed the components aswell.

Edit_

start the computer up in safe mode, keep pressing F8 on startup, select safe mode, then once it's loaded see if you can hibernate or shut down without any issue, this should rule out any hardware problems.

if it shuts down correctly, there is most likely some software or drivers preventing the system from shutting down correctly.

have you installed any new drivers in the last few months, or remote desktop software?

Around when this started, as far as I recall, no.......I might be forgetting something :s

There was a member here that said that he ran Windows Update and faced a similar issue.

check in the control panel, device manager to see if any of the sections are open and any drivers in an error state.

would help if you listed the components aswell.

Edit_

start the computer up in safe mode, keep pressing F8 on startup, select safe mode, then once it's loaded see if you can hibernate or shut down without any issue, this should rule out any hardware problems.

if it shuts down correctly, there is most likely some software or drivers preventing the system from shutting down correctly.

Ill try the safe mode procedure. Good call :)

you could also do a diognostic startup.

in the start menu type in

msconfig

here you can see all the services and starutp programs, in the general tab there is an option for 'diagnostic startup' this will turn everything off except the very basic items that need to run for windows to work.

might be worth going through the startup items deselecting what you dont really need to start up, and going through the services (at the bottom hide microsoft services) and start with just what you need to start, might sort the issue out.

This topic is now closed to further replies.
  • Posts

    • I have one of these monitors, i picked one up last year for cheap they work pretty well for everyday use and they are pretty clear and color isnt bad
    • Internet Download Manager (IDM) 6.43 Build 2 by Razvan Serea Internet Download Manager (IDM) is a tool to increase download speeds by up to 8 times due to its smart dynamic file segmentation technology. Unlike other download managers and accelerators, Internet Download Manager segments downloaded files dynamically during download process, and it reuses available connections without additional connect and login stages to achieve the best possible acceleration performance. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages. All popular browsers are supported IDM integrates seamlessly into Google Chrome, FireFox, Microsoft Edge, Opera, Safari, Internet Explorer, Maxthon and all other popular browsers to automatically handle your downloads. You can also drag and drop files, or use Internet Download Manager from command line. The program supports proxy servers, ftp and http protocols, firewalls, redirects, cookies, authorization, MP3 audio and video content processing. IDM includes web site spider and grabber IDM downloads all required files that are specified with filters from web sites, for example all pictures from a web site, or subsets of web sites, or complete web sites for offline browsing. It's possible to schedule multiple grabber projects to run them once at a specified time, stop them at a specified time, or run periodically to synchronize changes. Easy downloading with one click When you click on a download link in a browser, IDM will take over the download and accelerate it. You don't need to do anything special, just browse the Internet as you usually do. IDM will catch your downloads and accelerate them. IDM supports HTTP, FTP, HTTPS and MMS protocols. Changes in Internet Download Manager 6.43 Build 2: Resolved the problem that caused a "403 Forbidden" error when downloading some files Fixed a problem causing IDM download panel not to appear on some websites Fixed a bug that caused a crash when converting some TS files to MP4 Download: Internet Download Manager 6.43 Build 2 | 11.9 MB (Shareware) Links: Internet Download Manager Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • It's in Experimental (26H2). Settings->Windows Update->Windows Insider Program. Then a) select Experimental, b) below that, select "Advanced Options" (where you will see the three options for "Experimental" builds -> select 26H2 (name change from 25H2 is rolling; so might be 25H2)
  • Recent Achievements

    • Dedicated
      Zeynel earned a badge
      Dedicated
    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      246
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!