Every single game has "stopped working" since installing GTX 660


Recommended Posts

Did a google search for this and a lot of talk was floating around about messages concerning driver crashes but I haven't been getting that. I just swapped out my GTX 260 for a GTX 660, uninstalled all drivers, installed the GPU, installed the latest nvidia drivers and every game I go into crashes and I get a message saying "Far Cry 3 has stopped working". (Or whatever game I may try.) I have a 500W Antec Earthwatts PSU, minimum requirement is 450W. I'm also running a Q6600 OC'd to 3.4Ghz on a Gigabyte motherboard with PCI E 2.0. I've tried a couple driver reinstalls and reboots but no such luck. I'm trying a reinstall of DX now just in case.

EVGA GTX 660 SC

Q6600 @ 3.4 GHz

Antec Earthwatts 500W PSU

I should also note it seems to always happen right after the intial logo screen for the game or a developer logo screen, never during any gameplay. I've also run the EVGA stress test on the GPU with no crashes or issues. Could it be my OC?

You might try Driver Sweeper and see if that helps, but I'm betting the main power rails aren't giving enough juice.

Antec Earthwatts 500W PSU lists this: +3.3V@25A, +5V@24A, +12V1@22A, +12V2@22A, [email protected], [email protected] (Newegg)

EVGA GTX 660 SC needs this: Minimum of a 450 Watt power supply. Minimum recommended power supply with +12 Volt current rating of 24 Amps. (EVGA)

So it seems, both your +12V rails are 2 amps too low, and I'm guess as power hungry as nVidia cards are, that's the problem.

Grab another PSU (keep your receipt) and see if that solves the problem, if so card is good need to keep the PSU. If no change card is probably bad.

  • Like 1

DavidM is right. It's your power supply. When you launch a game, a video card draws more power. In your case, not enough electricity is being moved from your PSU to your video card because of the lower amperage (22A vs. the required 24A).

  • Like 1

If the GTX 260 worked fine it needed Minimum of a 500 Watt power supply

(Minimum recommended power supply with +12 Volt current rating of 36 amps).

http://www.evga.com/support/faq/afmviewfaq.aspx?faqid=58061

So before you get a new PSU which wouldn?t be a bad thing reset your CPU to stock reinstall the OS if needed and try that.

Could you have bumped something in there? Or maybe even ... some bad VRAM so when games load, hits a certain point in the RAM and *boom*? Probably not... I think Peter has the right of it, start by resetting everything.

1. Is your BIOS up to date? If not do so now.

2. Clear your bios with cmos jumper. Set everything back up, but don't overclock for the time being.

3. Try your games again. If they crash, try running Furmark. Does it crash on you? Does anything seem out of the ordinary?

4. If Furmark crashes, Try to get a better power supply. You are stressing it with that setup.

5. Still crashing? RMA the card.

Edit: Can't hurt to do a memtest too.

  • Like 2

Thanks for the replies! I went ahead and just decreased my OC. Well, took it back to stock and everything works fine. I guess I figured if it worked fine with my OC before it would now but perhaps the increased voltage combined with the different PSU requirements caused the issue? Either way, I'm happy. I mainly kept the OC at 3.4 - 3.6 to help prevent bottlenecking but honestly, if there is a bottleneck I sure didn't notice it. This thing flies! Still tempted to take advantage of the step up program in the next 90 days and get the 660Ti...

I will be investing in a new PSU though I think since I plan on getting a new CPU, motherboard and ram in the next couple of months.

Thanks for the replies! I went ahead and just decreased my OC. Well, took it back to stock and everything works fine. I guess I figured if it worked fine with my OC before it would now but perhaps the increased voltage combined with the different PSU requirements caused the issue? Either way, I'm happy. I mainly kept the OC at 3.4 - 3.6 to help prevent bottlenecking but honestly, if there is a bottleneck I sure didn't notice it. This thing flies! Still tempted to take advantage of the step up program in the next 90 days and get the 660Ti...

I will be investing in a new PSU though I think since I plan on getting a new CPU, motherboard and ram in the next couple of months.

Awesome! Glad it worked for you! :)

I will be investing in a new PSU though I think since I plan on getting a new CPU, motherboard and ram in the next couple of months.

Yeah definitely get something with a little more headroom. Probably at least a 750W. By running it at it's threshold, you're probably lowering it's lifespan, so you'd hate to have it die and then be out of commission while you wait for a new one to ship.

If the PSU has plenty of overhead, you should get a nice long life out of it. And it'll be a lot more future-proof too for future builds. :)

Might have spoken too soon. After playing some Far Cry 3 and exiting to the desktop, the game froze on a loading screen. Then a few minutes after running a stress test in Furmark everything stopped responding in Windows and I had to force restart. Looks like I should be checking out a new PSU...

It's most likely a faulty card. Update your board's BIOS. I've had it like this except that system would crash turning on Aero.

If no joy, test the card in another computer to be sure and that's it.

As for PSU, it might be going south and is of suboptimal brand as it is, but even then it's not marginal at all, having run GTX 260 without a hitch. Which is a big giveaway, actually. While higher wattage PSUs tend to be several percent more efficient, people are obsessed with their kilowatt PSUs as if it's horsepower of a car or something.

Also, I wish I could downvote people talking out of their ass about amps. Driving 22 amps through a single 6-pin PEG GTX 660 has (given that small part of the required power comes through the other +12V rail routed through the slot itself), with 18 gauge wires packed so close together would not only crash the game, but burn your house down.

Power supplies also do gradually lose capability over time. You didn't mention how old your power supply is, but no matter what, it seems to be the most marginal, so replacing the power supply should solve your woes.

They either work, or they don't.. so they are either good or faulty. There is no "gradually lose capability over time" with hardware...

They either work, or they don't.. so they are either good or faulty. There is no "gradually lose capability over time" with hardware...

Not actually true. Leaky capacitors can be a bitch.

Might have spoken too soon. After playing some Far Cry 3 and exiting to the desktop, the game froze on a loading screen. Then a few minutes after running a stress test in Furmark everything stopped responding in Windows and I had to force restart. Looks like I should be checking out a new PSU...

Aww...well that's a crock. :( What PSU are you going to get? Do you have another machine you can at least test and benchmark the card in?

Everything degrades in time and with use. So do electrolytic caps. Especially bad quality ones.

And while we're on the subject, so does magnetic field of hard disk platters, charge in flash drives decreases, if unused, and, in fact, semiconductors do degrade, albeit very slowly.

Caps do fail gradually, inhibiting their performance. Rest of things mentioned work until they fail.

They either work, or they don't.. so they are either good or faulty. There is no "gradually lose capability over time" with hardware...

Here's a footnote from a power supply calculator site.

Electrolytic capacitor aging. When used heavily or over an extended period of time (1+ years) a power supply will slowly lose some of its initial wattage capacity. We recommend you add 10-20% if you plan to keep your PSU for more than 1 year, or 20-30% for 24/7 usage and 1+ years.

http://extreme.outervision.com/PSUEngine

Well silly me, I forgot to change my voltage on my CPU back down to stock after decreasing my OC. Running at stock speeds with stock voltage and everything is fine. I'll gradually overclock my PC and test for issues but for now all is well. I had it stable at 3.2 with stock voltage before the GPU upgrade so I'll try that again and see. Maybe it was just my voltage all along. I guess I should pay more attention :p.

Well silly me, I forgot to change my voltage on my CPU back down to stock after decreasing my OC. Running at stock speeds with stock voltage and everything is fine. I'll gradually overclock my PC and test for issues but for now all is well. I had it stable at 3.2 with stock voltage before the GPU upgrade so I'll try that again and see. Maybe it was just my voltage all along. I guess I should pay more attention :p.

haha, Alright. Tell us if you run into anything else. Glad it's working for you. :)

Sorry about that - I was logged in to an out of use FB account on my phone and didn't realize it. Plus, I wasn't able to upload those images.post-45347-0-70704000-1358235982.gifpost-45347-0-45737700-1358236013.gif

I guess the whole reason I was thinking PSU (and forgive my ignorance) is things just started crashing..For example, I opened Chrome and it just ran sluggish and unresponsive. Even trying to pull up the task manager to end the task was delayed and after the system "caught up", I had to restart to have any type of performance I could use. I just didn't think a GPU could cause those issues. Again, my own ignorance.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
    • Apprentice
      Asgardi went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!