Recommended Posts

This one might be a bit of a complicated one. I'm sure that Budman will come to the rescue but anyone else feel free to chime in.

My Brother has a Cable internet connection and his ISP has some screwy routing so that when he tries to play on some gaming servers he frequents, it takes the long route from AUS to USA to Singapore, which gives ~400ms ping - too slow for a gamer - instead of going direct from AUS to Singapore. His ISP are like talking to a brick wall and he can't afford to change ISPs right now due to the high installation cost required to do so.

I have a fairly stable ADSL connection with a Static IP, Unlimited Upload/Download and I can request a /29 IP address range from my ISP at no extra charge. I get ~175ms ping to the servers he frequents which are located in Singapore, and I get ~50ms ping to my brother.

Even if this is no more than a learning experience, I suppose that it would be theoretically possible to connect a Router (Linux Box running pfSense) directly to my ADSL connection using a modem in Bridge mode so that I get a Public IP addresses directly on the Linux Box, and then configure the Linux box to route requests on this IP address to my ISP's default gateway.

Is this even possible? Would I be able to restrict IP addresses that my router will route from? Would two IPs that are on different subnets be required or would static routes work? Maybe I can split a /29 in two /30s?

Not sure if I read any of this right..

But.. Maybe setup your own VPN Server and let him connect?

If I didn't read this right.. Budman will come in here and make this thread his bitch..

I think you would be better off setting up a vpn tunnel between you and your brother and have anything going to the game server go across the vpn tunnel. It would be a bit cleaner that way, possibly faster.

Looks like I did read it right :)

But how much overhead would VPN add to latency? looking for low as possible.

I think that it won't be possible to do what I'm thinking, my brother would be on a different subnet and would need to configure his default gateway to go to me, but to get to me he would need to be on his ISP's subnet. If we shared the same ISP and happen to be put in the same subnet by theoretically be possible, but if my suspicions are correct, VPN would be the only way.

Which VPN has least latency?

There is not much you can do with how traffic is routed to dest from his connection. There is no way to change that.. It would come down to who the isp peers with, etc..

Going all the way to the US from AU to get to singapore sure seems like a the long way around ;)

The only way to accomplish what your after is either a vpn to your box, or a proxy you run on your box. Depending what this game server is proxy might work, if you go with vpn. All traffic could be routed through the tunnel.

Yes no matter what vpn you use its going to add a bit of latency.. Should be all that much if your talking 400 from him, and your seeing 50 from him to you, and then 175 from you to the game servers. 175 still seems like a bit much from AU to Singapore - how are you running.. Can you post up your hops? Curious to see his hops as well.

I would be curious to see the RTT I get to this game server, I have a connection in Mainland china I could test with.

As stated your best option is vpn tunnel -- as to ipsec or openvpn or something else. Pick one that your more comfortable with or more familiar with or one you would like to learn and go with it. Should really be too much difference in latency between them not when your talking like 225 anyway ;) And looking to improve upon 400.

yeah that is not going to solve the issue.. Unless you have a REALLY long cable you could run to the brothers house to connect your network to his.. I was not aware his brother was in the same building or maybe across the street from him.. If that is the case then sure he could just use his brothers connection via cable or even wireless with a client bridge setup.

You really should read the post before replying ;)

Do you really think they could afford such a solution?

"he can't afford to change ISPs right now due to the high installation cost required to do so."

Again with 50ms rtt between him and his brothers internet - I doubt they are in range of such a solution even cost was not an issue. Might be a solution if just not able to get internet in a specific location that fell without radius of the wireless solution range.

But I would think it would be cheaper for the brother to just change his isp vs setting up a long range wireless bridge. Now that being said, you can create some long range wireless bridge solutions via DIY and cheap setup.. Making your own antenna's using cheap wireless routers, etc. Do the brothers have line of site to each other? What distance are we talking?

About 10km, non line of sight. Not going to happen. I think that will test some hosted VPNs usually used to access Australian content first. They *should* use low latency backhaul, but with the price they offer, they could just be running it off their ADSL connection too. Free trial so worth a try.

If not, I will roll my own to test with. If test is successful, might look into a VPS hosted in Australia

I will post traceroutes tonight

So any traces? You got me really curious on this path that goes all the way to US from AU to get to Singapore ;)

I have been looking at global ping times between say Sydney or Melbourne and Singapore and they all suck... I see 300+ ms but can not seem to track down the path these pings are taking.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Honestly that feels even more useless than it did when Win11 was first released. In 2021, the uproar was somewhat justified, but only when comparing how good we've had it since Windows 7. Prior to that, a new Windows release would often require new, or very recent hardware. Windows XP wouldn't run (in any usable way) on hardware released when it's predecessor Win98 was released (let's ignore ME). It was time to shift the goal post, and the way Microsoft did that was actually ok. People have still had another FIVE YEARS of free software support with Windows 10, and those of us who want to have used these tools to bypass the limitations, all while understanding the impacts that may have. Most laptops don't last 5 years (sadly), so now the youngest unsupported hardware is 9 years old, and apparently has another year of support with Windows 10. That's good. Meanwhile, understanding the impacts and limitations, I have my 2013 laptop running Win11 perfectly fine. The thing that's failing on it is the hardware, the 2.5" SATA cable/chip is failing and corrupting the SSDs I put in. Thankfully it has a functional M.2 sata drive that works fine!
    • iPhone 18 Pro drop-test video and photos leak on the dark web following a data breach by Hamid Ganji iPhone 17 Pro - Image via Apple Apple is seemingly facing one of the biggest data breaches in its history, and just a few months before the official debut of the iPhone 18 Pro series, photos, a drop-test video, a supplier list, and key phone components have reportedly been leaked by hackers. Last week, we reported that Tata Electronics, an Apple supplier and iPhone producer in India, was hit by a data breach. As a result, it was reported that more than 200,000 trade secrets and confidential documents belonging to Apple and Tesla were stolen by the ransomware group World Leaks. According to Reuters, the group has now leaked supplier lists, component details, and photos of the upcoming iPhone 18 Pro models on the dark web. One of the materials leaked by the hackers is a drop-test video of the iPhone 18 Pro, which is due to launch this September. The phone is shown in a gray color and has the same familiar design we saw on last year's iPhone 17 Pro series. The device also appears to be quite durable, though it seems to be thicker than last year's model. One possible explanation is that Apple may be using a larger battery in the iPhone 18 Pro series. Moreover, Reuters says it has seen at least six documents mapping many components in the iPhone 18 Pro models to their respective suppliers, including details on chips on the main circuit board and on battery and camera components. The documents reportedly detail hundreds of parts that will be used in the iPhone 18 Pro models. A person familiar with the matter told the outlet that Apple classifies this data as sensitive and “is concerned about the documents being shared on the dark web as they relate to unreleased models.” Apple is reportedly investigating the issue but has yet to issue an official statement.
    • You do you, I've just said that it first appeared in "home" version before it will be available in "work" one. I use Edge only because it still supports MV2 uBO extension even on Android - I'll switch when they stop.
    • I imagine that was a review or something? My reviews mostly contain a lot of images and galleries, but these are all webp too, but yeah it all adds up on the page load. Would help if you were more helpful with your critique instead of bitching and moaning like a Karen 😂 Because then we might be able to fix it for you.
    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      142
    4. 4
      Steven P.
      100
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!