McLaren P1 officially revealed


Recommended Posts

Priced from 866,000 GBP

McLaren has officially revealed the P1 production version, ahead of the car's debut scheduled for next week in Geneva.

A couple of hours ago we published the first official images with the production version of the P1 and now McLaren has decided to reveal all details about their new supercar. Limited to 375 units, theMcLaren P1 will have a starting price of 866,000 GBP and 1,150,000 USD (approx 1,004,800 EUR). McLaren originally planned 500 units but Ron Dennis decided to make only 375 cars after meeting with potential owners who were concerned more about the car's exclusivity rather than top speed or price tag.

With Instant Power Assist System (IPAS) turned on, the P1 will hit 100 km/h (62 mph) in less than three seconds, while 0-200 km/h (124 mph) takes under seven seconds. It needs 17 seconds from 0 to 300 km/h (186 mph), before reaching an electronically limited top speed of 350 km/h (217 mph).

IPAS is basically the electric motor which can be activated via a steering wheel-mounted button which will give the P1 the throttle response of a normally-aspirated engine, according to McLaren. Another button on the steering wheel is labeled DRS ? Drag Reduction System. If pressed, the rear wing reduces in angle to lower drag by 23 percent. This can be turned off by pressing the brake pedal or releasing the button.

P1's heart and soul is a hybrid powertrain consisting of a twin-turbo, V8 3.8-liter mid-mounted engine generating 737 HP (542 kW) at 7,500 rpm and 531 lb-ft (720 Nm) of torque from 4,000 rpm and an electric motor adding 179 HP (132 kW) and 192 lb-ft (260 Nm). The McLaren P1 has a combined output of 916 HP (674 kW) and 663 lb-ft (900 Nm). Power is transferred to the ground via a 7-speed twin clutch Graziano gearbox. It can be driven on electric power for 20 km (12.4 miles) at an average speed of 30 mph (48 km/h).

The McLaren P1 has a drag coefficient of 0.34 and can generate 600 kg (1,322 lbs) of downforce (5x more than MP4-12C). It has a carbon fiber chassis which weighs 100 kg (220 lbs), making it the lightest ever installed on a road car and capable of providing F1-like safety and rigidity, according to the British firm. Compared to the legendary F1, its successor is 300mm longer and slightly wider and longer than the MP4-12C. It tips the scales at only 1,400 kg (3,086 lbs) thanks to its lightweight construction.

It has CO2 emissions of less than 200 g/km and rides on bespoke Pirelli P Zero Corsa tires. Stopping power comes from discs featuring a new type of carbon ceramic which hasn't been used so far on a road car, only in space. This material is stronger than regular carbon ceramic and dissipates heat more effectively. In addition, these discs are lighter than usual and boast a custom ceramic layer coat on the friction surfaces for a mirrored look.

Moving inside the cabin, the McLaren P1 features a driver-oriented cockpit where carbon fiber is the primary material. All carbon surfaces lack the top layer of resin which would have added 1.5 kg (3.3 lbs). Steering column and seats are adjustable, while the seat backrests are fixed at a 28-degree angle, but a 32-degree change is available for increasing helmet clearance. The extremely thin carbon seat shell weighs only 10.5 kg (23.1 lbs).

Although focus was on making it as light as possible, McLaren has added amenities such as satellite navigation, climate control and premium audio system. However, the list of comfort features ends here since this was built primarily as a driver's car, with the position of the driver being individually configurable and with a digital dash showing all relevant information in typical racing style.

1577848004759714391.jpg

842856229972064207.jpg

450819066920481199.jpg

1492075447647895213.jpg

5669640141913075372.jpg

4648335091029509364.jpg

1319149628532038247.jpg

234205208827203014.jpg

1826432324686551100.jpg

1121477607528348189.jpg

6025460581016742443.jpg

16529737661155725318.jpg

13753676111742852080.jpg

Link to comment
https://www.neowin.net/forum/topic/1138694-mclaren-p1-officially-revealed/
Share on other sites

to bad like the F1 it's a pure track car. meaning it's neither comfortable or practical in any way to use anywhere else except to show of, but then again, liek the F1 you eed to be a billionaire to be able to buy on. these cars make other super cars look like extremely practical family cars :p

to bad like the F1 it's a pure track car. meaning it's neither comfortable or practical in any way to use anywhere else except to show of, but then again, liek the F1 you eed to be a billionaire to be able to buy on. these cars make other super cars look like extremely practical family cars :p

Err what? I'm guessing you missed this part of the article:

Although focus was on making it as light as possible, McLaren has added amenities such as satellite navigation, climate control and premium audio system. However, the list of comfort features ends here since this was built primarily as a driver's car, with the position of the driver being individually configurable and with a digital dash showing all relevant information in typical racing style.

Yeah it's mostly a track car, but it's magnitudes more comfy and feature-filled than the bare-bones F1.

Err what? I'm guessing you missed this part of the article:

Yeah it's mostly a track car, but it's magnitudes more comfy and feature-filled than the bare-bones F1.

You do know what drivers car means right ?

this car is uncomfortable as hell to drive on the track, on a road it'll break your back, provided you bring a lift truck to lift it over the speed bumps.

Fun to rent for a couple of hours at the track, but that's about it. as a supercar it doesn't have the comfort or looks to be a top contender, it just has the status of "most expensive super car so look at me I'm awesome".

as awesome as it is, it's not even close to the top of my list if I get filthy ridiculously rich.

I look forward to Top Gear getting their hands on it.

Indeed, don't forget McLaren test on the Top Gear test track. A friend of mine actually spent a summer internship being driven around in this car while they were testing, handing the collection of the test data, and then got a full time job working on it when he finished uni. Lucky git!

That's part of the package when you own a supercar like that. Seriously.

There are better looking cars for much much cheaper than this that you can actually drive daily on the roads which will come with the same package, hell do I need a ~700k car for that?

There are better looking cars for much much cheaper than this that you can actually drive daily on the roads which will come with the same package, hell do I need a ~700k car for that?

That depends whether the price of the car is directly proportional to the women you might attract whilst showboating in it. I'd be happy to conduct a study but unfortunately I don't have a free ~700k lying about! :p

Indeed, don't forget McLaren test on the Top Gear test track. A friend of mine actually spent a summer internship being driven around in this car while they were testing, handing the collection of the test data, and then got a full time job working on it when he finished uni. Lucky git!

I'll bet this car was tested on the N?rburgring, and they will make a big point of that :)

You do know what drivers car means right ?

this car is uncomfortable as hell to drive on the track, on a road it'll break your back, provided you bring a lift truck to lift it over the speed bumps.

Fun to rent for a couple of hours at the track, but that's about it. as a supercar it doesn't have the comfort or looks to be a top contender, it just has the status of "most expensive super car so look at me I'm awesome".

as awesome as it is, it's not even close to the top of my list if I get filthy ridiculously rich.

Exaggerate much? Even the F1 has been spotted driving on normal roads numerous times.

What makes you think they are uncomfortable? They have cushioned seats, suspensions, airbags, and are street legal.

Whether it's driven on the track or a 300 mile trip, it will function just fine and so will your back.

Exaggerate much? Even the F1 has been spotted driving on normal roads numerous times.

What makes you think they are uncomfortable? They have cushioned seats, suspensions, airbags, and are street legal.

Whether it's driven on the track or a 300 mile trip, it will function just fine and so will your back.

being street legal and having suspension doesn't mean it's a comfy ride.

Exaggerate much? Even the F1 has been spotted driving on normal roads numerous times.

What makes you think they are uncomfortable? They have cushioned seats, suspensions, airbags, and are street legal.

Whether it's driven on the track or a 300 mile trip, it will function just fine and so will your back.

The F1 doesn't have airbags or power steering and its a centered driver seating makes it very impractical and not very comfortable. It doesn't even have cup holders. However, I think this P1 is mounds better in terms of comfort and practicality following the mp4-12c. I don't think there are many modern, supercars being made these days that are as barebones as the F1.

being street legal and having suspension doesn't mean it's a comfy ride.

I see nothing to indicate that it would be uncomfortable. All you've done is make a bad comparison to the F1 which made no sense since the F1 is bare-bones and the P1 is far from it. And saying it will break your back and not survive a civilian road is nothing but a sad exaggeration. Compared to most supercars, the P1 is very well equipt. Ever sit in an open-wheel racecar before? That's a pretty close definition of discomfort, but it's still not hard to drive one for hours on end.

The F1 doesn't have airbags or power steering and its a centered driver seating makes it very impractical and not very comfortable. It doesn't even have cup holders. However, I think this P1 is mounds better in terms of comfort and practicality following the mp4-12c. I don't think there are many modern, supercars being made these days that are as barebones as the F1.

Much agreed.

Most super cars are not comfortable ride,s no matter how many luxuries they have, NO supercar that's built as a trackday car is a comfy ride, they're built to be stiff and rigid.

Hello, my name is

and i'm here to destroy the McLaren P1 and at the same time being a comfy ride :D

Not only does this Nissan GT-R R35 kills the McLaren P1, but it laughs pretty good at the price of the McLaren P1 to.

This topic is now closed to further replies.
  • Posts

    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      99
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!