Nexus 4 - cannot sync contacts or control calls via bluetooth?


Recommended Posts

I recently jumped over to android having most recently been on WP8 and iOS. I figured the Nexus, being googles own device, would be a great one to start with.

I can pair my phone with my car bluetooth system, but it will not sync contacts. At all. No matter how often I try. Additionally, I cannot use the car controls to start/end calls, the only thing I can do is get audio so I have to initiate/end calls by the handset.

This is an absolute deal breaker. The most I can find is a lot of other users having the same problem but no solution. Had anyone been able to get around this?

If I cannot do such a basic thing such as this I am afraid the Nexus will have to go back, I rely too much on this feature for work.

  • 4 weeks later...

I contacted Google about this and they ended up sending a replacement device. Doesn't work. In fact if you search for Nexus 4 Bluetooth issues or Android 4.2.2 bluetooth issues there are many many reports of issues so it seems to be software related rather than hardware.

I will contact google again and see if I can get a refund. Unfortunately this device is pretty much useless to me if they can't even get bluetooth working right :/

What a mickey mouse operating system. Back to WP8!

What a mickey mouse operating system. Back to WP8!

Before you start with opinions like this, make sure it's not your car. FWIW, my Volvo can sync contacts from my Nexus just fine.

Which car do you have? For some reason, contact syncing is something that's always been really finicky - certain combinations of cars and phones work, others don't. Sometimes it's the phone's fault, sometimes it's the car's fault. It might be worth looking up the compatibility tables for your car.

  • 2 weeks later...

Since 4.2 they switched they switched to Broadcom Bluetooth stack which doesn't have AVRCP 1.3 (yet). It should be coming in he new 4.3. If you downgrade to 4.1 you should have AVRCP which then will allow some more advanced stuff, either that or wait till 4.3 comes out which should be in June.

Sounds to me like the OP can't figure something out that he should be able to do and has decided to blame Google for his failures, and he also now wants to troll Google, one more strike left looser

Since 4.2 they switched they switched to Broadcom Bluetooth stack which doesn't have AVRCP 1.3 (yet). It should be coming in he new 4.3. If you downgrade to 4.1 you should have AVRCP which then will allow some more advanced stuff, either that or wait till 4.3 comes out which should be in June.

Thanks, been doing some research into this and it seems to be confirmed the new Bluetooth stack is at fault.

From what I can gather a fix has been implemented in the opensource android but not in googles releases yet. Thanks for the info on 4.3, hopefully it will resolve all these issues. I relied so heavily on Bluetooth calling on all my other phones the Nexus for me is almost crippled without it.

Sounds to me like the OP can't figure something out that he should be able to do and has decided to blame Google for his failures, and he also now wants to troll Google, one more strike left looser

I take it you didn't read any of the other posts where it is clearly discovered to be an Android/broadcom software fault? Read them and try again troll.

Interesting to note - I have a HTC One running JB 4.1 and it syncs contacts with BMW. In fact, it was automatic, first thing that happened when I paired the phone with the car. I hope this is still the case w/ 4.2, but my hopes aren't there.

All reports of problems i've seen are issues using 4.2, with 4.1 having been OK, so matches up with the bluetooth stack having been changed.

I installed Cyanogenmod 10.1 RC2 and it fixes the bluetooth issue. Shame the clowns at Google haven't fixed it and its been up to the mod community to do their work for them.

Its a shame that Cyanogenmod doesn't fix the Nexus 4 washed out screen, where as Paranoid android does but doesn't fix bluetooth. Can't have everything I guess.

Certainly doesn't seem to be the premium experience its made out to be. Strongly considering moving back to WP8.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!