[guide] how do i use visual styles?


Recommended Posts

alright fellow neowinians...i used tp post this guide about once a week for new peeps on neowin so i decided to make a new and updated guide for you all smile.gif

thanks to uxtheme rafael aka vortex, larney and dreamz for collaborating with me.

this guide actually contains 3 methods on howto replace the uxtheme.dll and enable the theme-service under windows.

----------------------------------------------------------------------------------------

Using the offcial Neowin Uxtheme Patcher:

https://www.neowin.net/forum/index.php?showtopic=140707

It patches the UXTheme.dll for Windows XP/SP1/SP2 Beta/RTM and 2003 and allows you to use un-signed custom visual styles.

To simply patch the UXTheme.dll file, run the program, it will determine your operating system, then patch the appropriate file and reboot your PC.

To un-patch the UXTheme.dll file, run the program again, and it will un-patch the .dll and then reboot your PC.

official thread here: https://www.neowin.net/forum/index.php?showtopic=308905

This program will patch your uxtheme.dll file so you can use any 3rd party visual

style on Windows XP/SP1/SP2 and Windows Server 2003/SP1. File protection dialogs should

be cancelled and a reboot is required after using this patch.

Patched Windows XP and Windows Server 2003 systems with this program can be unpatched by

running this program again.

What's new in version 4.0

-Added 64-bit support (not 100% work)

-Added few delay (about 2.5 seconds) in some tasks to make it done before doing next

task (which I assume it solve some issues)

-Added Windows Server 2003 SP1 support

-Added stopping Themes service during patching for more success chance

http://www.windowsx.cc/download/nw_uxpatcher.zip

----------------------------------------------------------------------------------------

Larneys Guide:

1) Rename uxtheme.dll in C:\Windows\System32 to uxtheme.dll.old

2) Put the NEW uxtheme.dll into C:\Windows\System32

3) Reboot and delete uxtheme.dll.old (or just leave it be as backup)

----------------------------------------------------------------------------------------

insanekiwis guide:

Q: what do i need?

A: replacer app, uxtheme.dll, 2 minutes of your time.

anyway let's get started:

1) open cmd/run, type "winver" without the quotes and you'll see what version/built you have

2) hop over to http://www.vortex-scratchpad.info/reposito...atches/Uxtheme/ and get the uxtheme.dll for your windows built/version

3) then jump over to http://www3.telus.net/_/replacer and get replacer (it comes with a readme/guide so it's pretty easy to use)

4) execute it, drag'n'drop c:\windows\system32\uxtheme.dll on it, it will create a

backup for you automatically aswell.

5) then drag the NEW uxtheme.dll file on replacer so it gets replaced with the new one.

6) reboot.

7) put the visual style files in C:\WINDOWS\Resources\Themes,i.e.

C:\WINDOWS\Resources\Themes\THEMENAMEHERE

now your themes should be visible in the appereance tab.

apply the visual style of your choice.

done.

i hope this guide is easy to understand. i made it for those who tried the neowin

uxtheme patcher and it didn't work or for people who just don't know (yet) howto handle this little task or don't wanna use 3rd party software like tgtsofts' stylexp.

-insanekiwi

oh and please, don't ask or spam this guide. i don't want it to grow as big as the old one.

i also attached the replacer app in case the replacer website goes down again.

enjoy! happy patching :D

****UPDATE****

all mirrors are down, i put up the files i still had here: http://insanekiwi.is-pimp.com/thumbnails.php?album=11

if you got more files or can host additionally, message me.

Replacer_2.57.zip

Replacer_old_2.37.zip

Edited by insanekiwi
Link to comment
https://www.neowin.net/forum/topic/312381-guide-how-do-i-use-visual-styles/
Share on other sites

Is there a tool around that does kind of the same thing as style xp? just a app that cracks the memory somehow to enable themes. I wanna use it for school. Because if we reboot there al system files are returned to normal., so uxtheme patch wont do any good. And style xp is to big and take to much effort to install... Just need a simple app.

Sorry if its a wrong question in this thread...

shane: have you tried using the neowin uxtheme patcher? it should determine which version you have and patch the file automatically.

it looks like sp2 rtm + sp3 hotfixes = gdr. i might be wrong tho.

shane: have you tried using the neowin uxtheme patcher? it should determine which version you have and patch the file automatically.

it looks like sp2 rtm + sp3 hotfixes = gdr. i might be wrong tho.

585831091[/snapback]

Your correct. A new KB by Microsoft makes your version look strange like that. Nothing to worry about I'll talk to Rafael about putting that on his site as well.

Some problems with XPPro x64 RTM from MSDN here....

I've tried all the patchers, tried to manually patch using both the newest and an older version of replacer, but nothing is working.

Replacer gives me a copy file failed error.

The patcher just asks me to reboot, and after a full reboot, I still cannot use any themes.

Pretty frustrating. Anyone noticed this with XP x64 and actually got it working? I saw a couple of people posting about this same exact issue, but no fixes, just that replacer should work. But it obviously isn't for everyone. :(

Thanks...

im not seeing my windows version... closest one i see is in XP/SP2 Alpha whichi is 5.1.2600.1154... heres a SS of my windows version. Am i just missing sumthing?
Your correct. A new KB by Microsoft makes your version look strange like that. Nothing to worry about I'll talk to Rafael about putting that on his site as well.

I have the same version - So there is no appropriate version at Rafael's site? Can someone post here when there is? Thanks.

  • 2 weeks later...

I have some difficulties with patching uxtheme.dll. There are no .dll files for my OS at http://67.20.160.236:8080/repository/?path=Patches/Uxtheme/ nor patcher (UXTheme Multi-Patcher (Neowin Edition) 4.0) makes it work. I followed guides from every single FAQ here and still system hangs when it runs services during start (when login screen shows). Any ideas?

Thanks for help.

--Konnekted

post-111288-1116685182.jpg

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!