Recommended Posts

Gadly following your thread from the beginning, and followed some of your tips.

But there's something I would like to ask any of you, have you noticed the new behaviour on Lion, that after sleeping it doens't wakeup with a flick of the mouse as before (after some minutes) because I've set a hot corner for the screen to sleep, and it works (mouse flicking to wake it up) for some time, but after sometime it stops, and can only start with a keyboard press. I've fiddled with energy settings, Display sleep (set for one hour 'cose I use the hotcorner), but to no avail.

Another very annoying thing, is that mission control unlike expos?, stopped showing minimized windows, so I have no way to see minimized windows as of now....Bummer :blink:

If any of you know of a way out of any of this, it would be great!

I've noticed the issue with waking from sleep an assumed it was a bug.

As for minimised windows, if you double tap with 2 fingers on the appropriate app dock icon that will show all windows including those minimised. Same works for 3 finger swipe down (which I believe you have to enable).

Yeah, I'm pretty sure the 3 finger page up/down is no longer supported. I tried to bring it back, but now it either does dragging (if you enable it) or nothing at all.

Thanks for the heads up. It's a shame though, I really got used to that gesture and I'm still doing it on Lion with undesired results! :p

Thanks for the heads up. It's a shame though, I really got used to that gesture and I'm still doing it on Lion with undesired results! :p

Same. Not sure why they felt the need to restrict gestures that used to be customizable. I don't mind the addition of a ton of new gestures, but I should be able to interchange them as I want to.

I guess they did it to maintain simplicity. I'll just hope that they end up allowing us to change things up in future Lion releases.

PS. I found out that if you disable three finger swipe, you can set swiping forward and backward to "two or three fingers". Doesn't really solve the problem, but at least three finger swipes won't just sit there and do nothing.

but I should be able to interchange them as I want to.

I don't think you should. For this reason:

I guess they did it to maintain simplicity.

;)

For "more advanced" users, theres always BetterTouchTool, so you can disable the gestures that come by default and assign your own. :)

I guess they did it to maintain simplicity. I'll just hope that they end up allowing us to change things up in future Lion releases.

My concern is always that I can happily customise how I like on my personal MBP, but when in the working environment, it becomes a rather annoying issue, switching between custom and stock settings. But yes, the mere ability to be able to customise within Lion itself would be nice indeed.

Let me answer this question myself.. I'm using my own plist file which you can see is based on my location in Denmark. You can try using SE, NL or any other language code.

Well I tried following your guide but I can't make much sense of it. What part of .GlobalPreferences.plist needs to be changed exactly and what app did you use for it?

For "more advanced" users, theres always BetterTouchTool, so you can disable the gestures that come by default and assign your own. :)

Meh. I don't like using third party tools that are more like extensions to the OS. I avoid them like the plague. Gestures are done on the OS level, so I would prefer if the OS provided me with the level of customization that I want (if I choose to have it). Trust me, Apple could have done it without increasing complexity. I'm just going to assume they got lazy and had time constraints for the release.

Change Launchpad background effect:

Open Launchpad and press Cmd+B. To change to another effect, press it again.

Effects are:

- b&w sharp wallpaper

- b&w blur wallpaper

- color sharp wallpaper

- color blur wallpaper

  • 3 weeks later...

Has anyone found out a way to uncheck the checkbox by default? I'm using keyboard shortcuts to shutdown/restart/logout my Mac and I'm finding it fairly annoying that the OS keeps restoring my windows afterwards.

I would like to know this too, i have disabled restore for Apps but this option is annoying.

Does anybody know how to stop TextEdit from doing 'Save Version' instead of 'Save'? I'd like to bring back the old functionality if possible. In short, it will currently revert the file extension back to .txt automatically, even if it's something different. Bit annoying. :p

Does anybody know how to stop TextEdit from doing 'Save Version' instead of 'Save'? I'd like to bring back the old functionality if possible. In short, it will currently revert the file extension back to .txt automatically, even if it's something different. Bit annoying. :p

Not sure I'm following you. I just did a new .txt document, saved it, changed the extension to .csv, edited it in TextEdit and resaved it and it saved as a CSV. "Save a Version" didn't change it back to TXT, even though it kept the old TXT versions referenced in Versions.

  • 2 weeks later...

I saw this solution a while back but decided not to use it because it disabled the feature altogether. I just want the check box to be unchecked by default, rather than on, but with the ability to check it if needed. It annoys me that so far I haven't found a solution for this. Right now that's the only true issue I have left with OS X Lion on a daily basis.

In Mission Control, if you have an application window you want to move to a different space, click on it in the main window and drag it to the new space. It will also offer up an option to create a new space.

  • 2 weeks later...
  • 1 year later...

Change Launchpad background effect:

Open Launchpad and press Cmd+B. To change to another effect, press it again.

Effects are:

- b&w sharp wallpaper

- b&w blur wallpaper

- color sharp wallpaper

- color blur wallpaper

They changed it in Mountain Lion to Control + Option + Command + B :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • 5-year subscription to AdGuard VPN price-dropped now 90% off by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 88% off a 5-year subscription to AdGuard VPN. In the digital age where internet privacy is paramount, AdGuard VPN emerges as an essential tool. This virtual private network (VPN) is your encrypted gateway to the internet, helping your data stay secure and your online activities remain private, regardless of your location. More than just a privacy tool, AdGuard VPN is a robust solution packed with features that cater to a variety of internet needs. Why AdGuard VPN subscription deal over other VPNs: Exhaustive List of Locations: With 60+ locations available worldwide, you have the freedom to connect from anywhere you want, effectively bypassing geographically restricted content. Check complete list of servers here. Advanced Security Protocol: AdGuard VPN uses its own security protocol, guaranteeing a faster and safer VPN connection. This means you can browse, stream, and download with peace of mind knowing your data is secure. Zero-Logging Policy: Rest assured, your personal data is not collected and your internet traffic stays private at all times, thanks to AdGuard's strict zero-logging policy. Simultaneous Connections: Connect up to 10 devices simultaneously, providing protection for all your devices under just one account. Trusted Developer: AdGuard is a renowned name in the world of computer security, bringing their expertise and commitment to privacy and security to their VPN service. What You Get: Up to 10 devices connected simultaneously All locations Light-speed servers Unlimited data No logs policy Trusted developer Available on all platforms Privacy Created by a team from Russia, AdGuard software Limited is headquartered in Limassol, Cyprus. While the country does follow European privacy laws, it's not part of the 5/9/14 Eyes Alliance. Adguard may not properly work in China. Good to know Length of access: 5 years This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Device per license: 10 Access options: desktop & mobile Updates included 5- years of AdGuard VPN normally costs $359.40 without discounts, but it can be yours just $39.97, that's a saving of $324.43 (90%) off. For full terms, specifications, and license info please click the link below. Get this 5-year AdGuard VPN deal for just $34.97 (was $359.40) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • KillerPDF 1.5.1 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.5.1 changelog: Performance Save Flattened PDF now uses multiple CPU cores. Page rasterization is parallelized (PNG encoding runs across cores; the PDFium render step stays serialized since the library isn't thread-safe), so large documents flatten significantly faster while the UI stays responsive (#68). Fixed PDFs that failed to open with "Unexpected EOF" now open (#72). The failure was PdfSharpCore's Flate inflater (SharpZipLib) rejecting the FlateDecode cross-reference stream on multi-revision PDFs - files that open fine in browsers, Acrobat, and Foxit. KillerPDF now detects this and re-opens the file losslessly through PDFium, preserving selectable text. Thanks to @javajon for the report and a detailed reproduction. Grid view renders every page. It was capped at the first 26 pages, so longer documents stopped loading partway through. Tiles also stream in progressively now instead of blocking until the whole document is rendered. Grid Ctrl+Scroll no longer reloads every page when the zoom is already at its limit and nothing would change. Removed a stray horizontal scrollbar (a thin green line) that could appear across the bottom of grid view. Files on UNC / network shares (including the WSL \\wsl$ filesystem) are copied locally before opening, avoiding partial-read failures on network filesystems. Changed Minimum zoom lowered from 10% to 5%, so grid view can pack more columns (helpful for wide/landscape pages) and single-page view can zoom out further. Download: KillerPDF 1.5.1 | 6.3 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You can enable the Nova redesign in Firefox 152 stable, under about:config.
    • You can enable the Nova redesign in Firefox 152, under about:config
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      520
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!