How can I find out what is using all of my upload bandwidth?


Recommended Posts

Something is randomly using all of my upload bandwidth, which makes my connection crawl.

I do not have spyware, adware or a virus.

How can I find out what process is doing this?

EDIT: This only started happening after I installed NetBalancer. However, it was uninstalled hours ago and I have rebooted, so I'm unsure how it can even be related.

Windows 7 x64 SP1.

EDIT: I rang Sky Broadband, they said it was an issue at the local hub and that it will be fixed within 30 minutes. I read a book for an hour, came back and the connection is now all good. Sorry, guys! Just seemed a massive co-incidence.

Look at the Task manager -- ctrl-alt-delete.

What processes are running ?

Also it may be a rootkit, and something has made your PC a zombie.

Do a rootkit scan.

http://www.sophos.com/en-us/products/free-tools/sophos-anti-rootkit.aspx

  On 24/07/2011 at 13:14, Hum said:

Look at the Task manager -- ctrl-alt-delete.

What processes are running ?

Also it may be a rootkit, and something has made your PC a zombie.

Do a rootkit scan.

http://www.sophos.com/en-us/products/free-tools/sophos-anti-rootkit.aspx

I have no rootkits. Only novices get rootkits, spyware, adware or virus'.

This only started happening after I installed NetBalancer. However, it was uninstalled hours ago and I have rebooted, so I'm unsure how it can even be related.

Maybe I should call Sky Broadband, it could be an issue on their end (i.e. a co-incidence).

  Quote
I have no rootkits. Only novices get rootkits, spyware, adware or virus'.

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the superiority complex. If you can't rule it out (and opinion rules nothing out) then it still exists.

  • Like 2
  On 24/07/2011 at 13:24, njlouch said:

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the attitude.

There is no attitude. It's very true. Just because I find it very easy to avoid getting rootkits, spyware, adware or viruses, it doesn't mean I know what software you guys recommend to discover what processes are using my bandwidth. I know that NetLimter can tell me what processes are using my bandwidth but in case that program is calling this issue, I am of course reluctant to re-install it.

The reason I know it's not a rootkit is because I doubt very much it's a co-incidence that NetLimiter was installed/uninstalled an hour before this issue occurred.

For ****s and giggles, I'll run Sophos Anti-Rootkit.

  On 24/07/2011 at 13:29, Detection said:

I think the clue is in the name "NetLimter "

Sounds like it has left something behind after the uninstall

That is not logical. The program was used to stop Firefox using all of my 130 KB/s upload bandwidth. I used it to limit Firefox to using a maximum of 95 KB/s in upload bandwidth. I then uninstalled it as, even though it worked, I decided just to go ahead and let Firefox do what it wishes.

So why would that program, installed or not, be doing this to my connection...?

EDIT: Sophos Anti-Rootkit found nothing suspicious. As expected.

As it is designed to limit bandwidth, your issue is bandwidth related, and it started around the time you installed and uninstalled this program I would say its more likely to be that than a coincidence.

I vaguely remember installing something similar if not the same program a while ago and completely losing my connection, programs like this install drivers I think, check hidden items in the device manager / services running in services.msc etc

If it all fails, as posted above, system restore to before the issue

  On 24/07/2011 at 13:36, Detection said:

As it is designed to limit bandwidth, your issue is bandwidth related, and it started around the time you installed and uninstalled this program I would say its more likely to be that than a coincidence.

I vaguely remember installing something similar if not the same program a while ago and completely losing my connection, programs like this install drivers I think, check hidden items in the device manager / services running in services.msc etc

If it all fails, as posted above, system restore to before the issue

It does install a service but from what I can tell, there appears to be no related services on my computer :/

  On 24/07/2011 at 13:36, _DP said:

Do you get the same issue with other browsers?

This is happening system-wide. For example, I can be playing a game fine then a few seconds later, I get 900 ping before getting kicked. It's then that I realize something was uploading using all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds.

If your looking to track what process is using upload, you could run tcpview http://technet.microsoft.com/en-us/sysinternals/bb897437

You could run wireshark as well - great FREE protocol analyzer http://www.wireshark.org/ to see what is actually being put on the wire, etc. but what show you what process did it, just what is being done.

Or you could put netlimiter back on ;) It shows you what is using bandwidth heeheheh

I rang Sky Broadband, they said it was an issue at the local hub and that it will be fixed within 30 minutes. I read a book for an hour, came back and the connection is now all good. Sorry, guys! Just seemed a massive co-incidence.

I wasn't trying to be douchey earlier when I said it's not difficult to avoid getting rootkits, spyware, adware or viruses, it just really is easy to avoid them in my opinion :s Stick to legitimate websites, check comments when downloading torrents, keep your Windows and MSE up-to-date, don't start using dodgy Facebook apps etc. and you will be fine!

"all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds. "

Um how is your box uploading an issue at the local hub?

  On 24/07/2011 at 13:45, BudMan said:

"all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds. "

Um how is your box uploading an issue at the local hub?

I am not sure. The ping issues were due to an problem at the local LLU according to Sky Broadband and when they said it would be fixed in about 30 minutes, they were right!

Sounds like a common sense solution.. the program you installed which was "NetBalancer" has screwed with Winsock... you need to reset this.

Open up command prompt.... and type the following just as I've put it spaces and all:

netsh winsock reset catalog - Hit Enter

netsh int ip reset reset.log hit - Hit Enter

Now Reboot and test again.

Even if you think your problem is solved don't put that junk netbalancer back on there..its nothing but a sandbox and useless...control your bandwidth or monitor it using your router. Run these reset lines to get Windows7 winsock stacks back to default the way its supposed to be if anything did in fact alter it.

  On 24/07/2011 at 13:24, njlouch said:

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the superiority complex. If you can't rule it out (and opinion rules nothing out) then it still exists.

Actually with most home routers it's not that easy to get per device bandwidth usage data.

Even the ones that allow collecting the data via something like SNMP usually only go down to the port level, which is no good in the case of wireless or if there's a switch further upstream of that port.

"I am not sure. The ping issues were due to an problem at the local LLU"

And are you still seeing an upload of 130 when your not doing anything?

And I agree with xbamaris the resource monitor in w7 is perfect tool for looking this up, not sure why I forgot it other than just habit from older windows versions not having the ability to look at this. But yes that is the best suggestion for looking to see what is uploading.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nope. This will be disabled instantly on all my devices. But at least they're not forcing it upon users, it can be turned off.
    • But, but, Meta did not have address to your data? I don’t believe this cap. Why-o-why don’t I trust them?!
    • They're not lying in this case, violating your privacy and safety is certainly of utmost importance to Zuck and his creeps...
    • Microsoft employee behind AnduinOS releases more updates, here's how to upgrade by Paul Hill A small Linux distribution created by a Microsoft employee drew quite a bit of attention in recent months with its attempts to ease users into Linux by looking just like Windows. This week, AnduinOS was upgraded to a new batch of point releases, including 1.3.3, 1.2.6, and 1.1.6. These point releases do not bring too many changes, and all the changes that are introduced are identical across all three versions. Here are the release notes this time: Fixed an accessibility issue that caused the screen reader unable to read the text. Added librime-plugin-lua for ibus-rime users to support Lua scripts. This only affects zh_CN by default. Added policykit-desktop-privileges to the default app list to allow no-password prompts for mount, simple updates, etc. As a new Linux distribution on the scene, updating it is not as straightforward as opening a software store and tapping the upgrade button. For now, upgrades rely on a script. To update your computer using this script, open up a terminal window and type do_anduinos_upgrade. Running this command will bring you up to the latest point release for your respective major version, even if you’re not on the latest point release right now. In the future, Anduin Xue, the Microsoft employee who develops AnduinOS, wants to allow you to grab new versions via sudo apt upgrade. For the time being, users will need to stick to running the script to ensure their device is up to date. Last month, it was announced that AnduinOS 1.4 will be based on Ubuntu 25.10 and will drop in late October, while Anduin OS 1.5 will be based on Ubuntu 26.04 LTS and arrive in late April 2026. Hopefully, we will see more maturation with those updates, such as upgrading the system with an apt command instead of a script.
    • I know companies like to assume first party ads are okay, and I often don't have a huge problem with things like extra iCloud space offers showing up in relevant places. Relevant being the keyword. There is literally nowhere on a phone where a movie ad would ever be in context.
  • Recent Achievements

    • First Post
      solidox earned a badge
      First Post
    • First Post
      BA the Curmudgeon earned a badge
      First Post
    • One Year In
      blissa jayden earned a badge
      One Year In
    • One Month Later
      blissa jayden earned a badge
      One Month Later
    • Week One Done
      blissa jayden earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      561
    2. 2
      ATLien_0
      213
    3. 3
      +FloatingFatMan
      171
    4. 4
      Michael Scrip
      152
    5. 5
      Som
      151
  • Tell a friend

    Love Neowin? Tell a friend!