How can I find out what is using all of my upload bandwidth?


Recommended Posts

Something is randomly using all of my upload bandwidth, which makes my connection crawl.

I do not have spyware, adware or a virus.

How can I find out what process is doing this?

EDIT: This only started happening after I installed NetBalancer. However, it was uninstalled hours ago and I have rebooted, so I'm unsure how it can even be related.

Windows 7 x64 SP1.

EDIT: I rang Sky Broadband, they said it was an issue at the local hub and that it will be fixed within 30 minutes. I read a book for an hour, came back and the connection is now all good. Sorry, guys! Just seemed a massive co-incidence.

Look at the Task manager -- ctrl-alt-delete.

What processes are running ?

Also it may be a rootkit, and something has made your PC a zombie.

Do a rootkit scan.

http://www.sophos.com/en-us/products/free-tools/sophos-anti-rootkit.aspx

  On 24/07/2011 at 13:14, Hum said:

Look at the Task manager -- ctrl-alt-delete.

What processes are running ?

Also it may be a rootkit, and something has made your PC a zombie.

Do a rootkit scan.

http://www.sophos.com/en-us/products/free-tools/sophos-anti-rootkit.aspx

I have no rootkits. Only novices get rootkits, spyware, adware or virus'.

This only started happening after I installed NetBalancer. However, it was uninstalled hours ago and I have rebooted, so I'm unsure how it can even be related.

Maybe I should call Sky Broadband, it could be an issue on their end (i.e. a co-incidence).

  Quote
I have no rootkits. Only novices get rootkits, spyware, adware or virus'.

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the superiority complex. If you can't rule it out (and opinion rules nothing out) then it still exists.

  • Like 2
  On 24/07/2011 at 13:24, njlouch said:

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the attitude.

There is no attitude. It's very true. Just because I find it very easy to avoid getting rootkits, spyware, adware or viruses, it doesn't mean I know what software you guys recommend to discover what processes are using my bandwidth. I know that NetLimter can tell me what processes are using my bandwidth but in case that program is calling this issue, I am of course reluctant to re-install it.

The reason I know it's not a rootkit is because I doubt very much it's a co-incidence that NetLimiter was installed/uninstalled an hour before this issue occurred.

For ****s and giggles, I'll run Sophos Anti-Rootkit.

  On 24/07/2011 at 13:29, Detection said:

I think the clue is in the name "NetLimter "

Sounds like it has left something behind after the uninstall

That is not logical. The program was used to stop Firefox using all of my 130 KB/s upload bandwidth. I used it to limit Firefox to using a maximum of 95 KB/s in upload bandwidth. I then uninstalled it as, even though it worked, I decided just to go ahead and let Firefox do what it wishes.

So why would that program, installed or not, be doing this to my connection...?

EDIT: Sophos Anti-Rootkit found nothing suspicious. As expected.

As it is designed to limit bandwidth, your issue is bandwidth related, and it started around the time you installed and uninstalled this program I would say its more likely to be that than a coincidence.

I vaguely remember installing something similar if not the same program a while ago and completely losing my connection, programs like this install drivers I think, check hidden items in the device manager / services running in services.msc etc

If it all fails, as posted above, system restore to before the issue

  On 24/07/2011 at 13:36, Detection said:

As it is designed to limit bandwidth, your issue is bandwidth related, and it started around the time you installed and uninstalled this program I would say its more likely to be that than a coincidence.

I vaguely remember installing something similar if not the same program a while ago and completely losing my connection, programs like this install drivers I think, check hidden items in the device manager / services running in services.msc etc

If it all fails, as posted above, system restore to before the issue

It does install a service but from what I can tell, there appears to be no related services on my computer :/

  On 24/07/2011 at 13:36, _DP said:

Do you get the same issue with other browsers?

This is happening system-wide. For example, I can be playing a game fine then a few seconds later, I get 900 ping before getting kicked. It's then that I realize something was uploading using all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds.

If your looking to track what process is using upload, you could run tcpview http://technet.microsoft.com/en-us/sysinternals/bb897437

You could run wireshark as well - great FREE protocol analyzer http://www.wireshark.org/ to see what is actually being put on the wire, etc. but what show you what process did it, just what is being done.

Or you could put netlimiter back on ;) It shows you what is using bandwidth heeheheh

I rang Sky Broadband, they said it was an issue at the local hub and that it will be fixed within 30 minutes. I read a book for an hour, came back and the connection is now all good. Sorry, guys! Just seemed a massive co-incidence.

I wasn't trying to be douchey earlier when I said it's not difficult to avoid getting rootkits, spyware, adware or viruses, it just really is easy to avoid them in my opinion :s Stick to legitimate websites, check comments when downloading torrents, keep your Windows and MSE up-to-date, don't start using dodgy Facebook apps etc. and you will be fine!

"all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds. "

Um how is your box uploading an issue at the local hub?

  On 24/07/2011 at 13:45, BudMan said:

"all of my 130 KB/s upload speed. I am using Rainmeter to find my current system down/up speeds. "

Um how is your box uploading an issue at the local hub?

I am not sure. The ping issues were due to an problem at the local LLU according to Sky Broadband and when they said it would be fixed in about 30 minutes, they were right!

Sounds like a common sense solution.. the program you installed which was "NetBalancer" has screwed with Winsock... you need to reset this.

Open up command prompt.... and type the following just as I've put it spaces and all:

netsh winsock reset catalog - Hit Enter

netsh int ip reset reset.log hit - Hit Enter

Now Reboot and test again.

Even if you think your problem is solved don't put that junk netbalancer back on there..its nothing but a sandbox and useless...control your bandwidth or monitor it using your router. Run these reset lines to get Windows7 winsock stacks back to default the way its supposed to be if anything did in fact alter it.

  On 24/07/2011 at 13:24, njlouch said:

Well, you claim not to be a novice but can't even track your usage?

Check for rootkits and drop the superiority complex. If you can't rule it out (and opinion rules nothing out) then it still exists.

Actually with most home routers it's not that easy to get per device bandwidth usage data.

Even the ones that allow collecting the data via something like SNMP usually only go down to the port level, which is no good in the case of wireless or if there's a switch further upstream of that port.

"I am not sure. The ping issues were due to an problem at the local LLU"

And are you still seeing an upload of 130 when your not doing anything?

And I agree with xbamaris the resource monitor in w7 is perfect tool for looking this up, not sure why I forgot it other than just habit from older windows versions not having the ability to look at this. But yes that is the best suggestion for looking to see what is uploading.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ummmm Are you kidding? Do think these books being sold are disclosing they are AI written?
    • i'm just commenting because of this madness. you simply asked "what crowd" which i too am genuinely curious about, only to receive a response in the form of a link that directs to an analysis of the audited financial statements with the accompanying notes. then you say that the guy who wrote it is stupid, which whatever, that's not an argument being discussed atm, only to receive a response from Arceles saying "i don't deal with people whose first response is an ad homenim". jesus. this is like making a claim, and then saying "i don't deal with people who speak in a certain way or swear so i'm not gonna answer you hah!" (said in a nasaly voice, not trying to depict you Arceles). then focus on the argument instead of the explanation begins... "so what don't you like about the guy (lunduke)" followed by "he just likes to insult people" and the explanation for the "crowd" being referred to was never even established. so a request for an explanation about the crowd turned into an argument about "why do you think lunduke is an idiot". wowza.
    • Sony lays off 30% of staff from Days Gone developer Bend Studio by Pulasthi Ariyasinghe Another wave of layoffs has hit the game developer space, and this time, it's a first-party Sony studio that's been affected. Following a report by Bloomberg's Jason Schreier, Bend Studio has confirmed that it is letting go of "incredibly talented teammates" as it begins work on a new game project. "Today, we said goodbye to some incredibly talented teammates as we transition to our next project," said Bend Studio in a social media post today. "We're deeply thankful for their contributions as they've shaped who we are, and their impact will always be part of our story." Bend Studio is most well-known for its 2019-released open-world zombie adventure Days Gone, which even received a remaster just a few months ago. Prior to that, the studio had been responsible for the classic Syphon Filter series while also developing several PlayStation Portable and Vita games like Resistance: Retribution and Uncharted: Golden Abyss, respectively. "This is a difficult moment for our team, but we hold immense respect for everyone who got us here," the company added. "As we move forward, we remain committed to building the future of Bend Studio with creativity, passion, and innovation in the titles we craft." While Sony did not detail just how many staff have been affected by this latest decision, Jason Schreier revealed that 30% of the studio is being laid off. This amounts to around 40 people, according to the reporter. Earlier this year, Sony canceled two live service games that were in development at Bend Studio and Bluepoint Games. It was never revealed what this mystery game was supposed to be. "Bend and Bluepoint are highly accomplished teams who are valued members of the PlayStation Studios family," Sony said at the time. It's unclear if Bluepoint, which had been developing a God of War live service experience, will soon be hit by its own wave of layoffs too.
    • KataLib 4.5.3.0 by Razvan Serea KataLib is more than just a music player — it's a complete audio suite designed for music lovers and creators alike. It combines a powerful audio player, a flexible metadata editor, a capable audio converter, and a music library manager into one streamlined application. Core Features: Audio Player Enjoy seamless playback of virtually any audio format or even streaming video files. DJ Mode lets you mix tracks with manual or automatic crossfades. You can also load and save WinAmp-style playlists for quick access to your favorite sets. Audio Converter Convert between a wide range of audio formats effortlessly. Trim or normalize your output automatically, and even extract audio from streaming video sources. Ideal for preparing files for different devices or platforms. Metadata Editor View and edit ID3v2 tags and other metadata. Batch edit multiple files at once, and fetch missing information directly from the MusicBrainz database. You can also apply or update album art with ease. Music Library Manager Organize your entire audio collection, search across tracks instantly, and download cover images from the internet — or use your own custom artwork. KataLib makes it easy to keep your library tidy and enriched with useful info. Supported Formats: KataLib supports a wide range of both lossy and lossless audio formats: Input: OPUS, AAC, FLAC, M4A, MP3, MP4, MPC, APE, AIF, MKV, AVI, MOV, FLV, WEBM, Ogg Vorbis, WAV, WAVPack, WMA Output: OPUS, FLAC, M4A, MP3, Ogg Vorbis, WAV Under the hood, KataLib uses the trusted FFmpeg engine for audio conversion and media playback, ensuring compatibility with virtually all mainstream media formats. Download: KataLib 4.5.3.0 | 64.5 MB (Open Source) Links: KataLib Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I had this issue and it is a nova android conflict issue. Initially the only way to fix it was clicking the screen off and then back on. Figured out it was because of a task I set up in tasker to load certain apps when I connect to my car, so fixed it by adding a 'go home' task after the app loaded and rarely have the issue now
  • Recent Achievements

    • First Post
      K Dorman earned a badge
      First Post
    • Reacting Well
      rshit earned a badge
      Reacting Well
    • Reacting Well
      Alan- earned a badge
      Reacting Well
    • Week One Done
      IAMFLUXX earned a badge
      Week One Done
    • One Month Later
      Æhund earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      ATLien_0
      270
    3. 3
      +FloatingFatMan
      209
    4. 4
      +Edouard
      203
    5. 5
      snowy owl
      140
  • Tell a friend

    Love Neowin? Tell a friend!