Recommended Posts

Hello, I was looking to have one of my network devices completely exposed to the internet, as I have read the easiest way to do this is by setting up a DMZ (after giving that device a dedicated IP)

The problem I am running into is this, my router DOES NOT have a DMZ setting, so I was wondering if I can just open up the entire range of ports (1-65534) through port forwarding. Will this give me the same affect?

Link to comment
https://www.neowin.net/forum/topic/1026548-alternative-to-setting-up-a-dmz/
Share on other sites

  On 18/09/2011 at 20:21, remus_lupin said:

Hello, I was looking to have one of my network devices completely exposed to the internet, as I have read the easiest way to do this is by setting up a DMZ (after giving that device a dedicated IP)

The problem I am running into is this, my router DOES NOT have a DMZ setting, so I was wondering if I can just open up the entire range of ports (1-65534) through port forwarding. Will this give me the same affect?

The thing about a DMZ is that it puts that computer separate from your internal network. If you just open those ports, that machine is still on your internal network, and then you'd need to run a firewall on your other machines to protect it from that machine since it's wide open.

Why do you need a device completely exposed? What device is it?

EDIT: What router do you have? I've never seen one that doesn't have a DMZ.

  On 18/09/2011 at 21:21, HawkMan said:

It will, along with most likely breaking your network.

If you don't have a dmz, just open the ports you need.

Yeah it did break my network, I undid it. The problem is, I have TRIED opening just the ports I need but it didn't help. So I figured I would try giving my device FULL access to the internet (no restrictions)...

  On 18/09/2011 at 21:25, farmeunit said:

The thing about a DMZ is that it puts that computer separate from your internal network. If you just open those ports, that machine is still on your internal network, and then you'd need to run a firewall on your other machines to protect it from that machine since it's wide open.

Why do you need a device completely exposed? What device is it?

EDIT: What router do you have? I've never seen one that doesn't have a DMZ.

Here is what I am trying to do, get my PS3 from NAT type 3 to NAT type 2. I have tried opening all recommended ports and UPNP is enabled, I have searched through many different forums and attempted many different things, setting up a DMZ was my last resort less of calling my ISP and asking for a public IP (as the one I have is private - I read this may cause my NAT type 3 problem). However they charge $10 each month for a public IP, so I was looking for a way around this.

EDIT: It's a new internet service (I live out in the country and cannot get fibre optics/cable etc. it is a turbo hub from bell with a built in router that allows me to get highspeed internet service) The modem/router is made by Netgear and the model is MBR1210

http://www.bell.ca/shopping/en_CA_ON.4G-NETGEAR-MBR1210Turbo-Hub/71142.details

  On 18/09/2011 at 21:43, farmeunit said:

Yup I have tried both of those, however I do thank you for the link to the manual (doh) I am going to try setting up the DMZ now, hopefully it will work!

Unfortunately setting up a dmz did nothing, I still have NAT type 3.

I have each of my devices running on their own IP and I made sure when I set up the DMZ that I added the IP for the PS3 and not one of my other computers, I also made sure I put the NAT filtering on OPEN not secure

Unfortunately setting up a dmz did nothing, I still have NAT type 3.

I have each of my devices running on their own IP and I made sure when I set up the DMZ that I added the IP for the PS3 and not one of my other computers, I also made sure I put the NAT filtering on OPEN not secure

  On 18/09/2011 at 22:22, remus_lupin said:

Unfortunately setting up a dmz did nothing, I still have NAT type 3.

I have each of my devices running on their own IP and I made sure when I set up the DMZ that I added the IP for the PS3 and not one of my other computers, I also made sure I put the NAT filtering on OPEN not secure

Sounds like double nat to me

  On 18/09/2011 at 22:25, chrispinto said:

Sounds like double nat to me

I don't have a second router on my network, the turbo hub has one built in and I am using that directly.

  On 18/09/2011 at 22:25, x9248 said:

PS3 supports uPnP btw.

I have tried UPnP on my router and PS3, still NAT type 3, then I tried manually port forwarding. Still NAT type 3.

I am not having trouble with playing games, even with type 3 all games I have tried work well, I just can not do video chats.

i had the same issues. have a E2000 Cisco router, we have 2 XBox360 1PS3 3 computers in the house, and this NAT problem was happening with the 2 xbox360 and PS3. I ended up installing DD-WRT onto my router and now i dont have the issue. the custom firmware is amazing! i day look into what you have and if you cant install it, get a new router that lets you!

  On 18/09/2011 at 23:52, lflashl said:

i had the same issues. have a E2000 Cisco router, we have 2 XBox360 1PS3 3 computers in the house, and this NAT problem was happening with the 2 xbox360 and PS3. I ended up installing DD-WRT onto my router and now i dont have the issue. the custom firmware is amazing! i day look into what you have and if you cant install it, get a new router that lets you!

Unfortunately I do not think this will help in my case, as the turbo hub itself is what seems to be limiting my NAT type, so even if I bought an external router and put DD-WRT on it, it would still be going through the turbo hub and my NAT would be limited at that point. Having said that I checked google and there is no custom firmware for my particular model.

Thank you very much for the suggestion though!

seems like this problem has been going on for sometime, and there is no fix for it. what about firmware is there a update you can use? have you contacted the location where you got the device from and question with them?

"calling my ISP and asking for a public IP (as the one I have is private"

If your router has a private IP from your ISP on its wan port, then yeah your behind a double nat.. And nothing you do on your router is going to make any difference for unsolicited inbound traffic.

Unless you have control over the device giving your router the private IP on its wan port, there is NOTHING you can do.

  • Like 1
  On 19/09/2011 at 11:03, lflashl said:

seems like this problem has been going on for sometime, and there is no fix for it. what about firmware is there a update you can use? have you contacted the location where you got the device from and question with them?

  On 19/09/2011 at 12:16, BudMan said:

"calling my ISP and asking for a public IP (as the one I have is private"

If your router has a private IP from your ISP on its wan port, then yeah your behind a double nat.. And nothing you do on your router is going to make any difference for unsolicited inbound traffic.

Unless you have control over the device giving your router the private IP on its wan port, there is NOTHING you can do.

Unfortunately I did call them and they would not give me a public IP... They told me that they are only available for their business clients.

Oh well, thanks for all your help!

So you can not get any unsolicited inbound traffic? Or do they have your private IP in the dmz of their nat? You can make things work in a double nat, as long as the traffic is being sent to your private IP.

I would do a simple port forward to some service that is listening, be it ftp, ssh, http, telnet, something that is easy to turn on and you know is listening on your machine via netstat -an seeing the box listening on that port.

Then setup a forward on your router to that port and ip of the box listening. Then check that with canyouseeme.org -- do you see that port open.

I can walk you through a simple port open and forward check.

  On 19/09/2011 at 13:42, BudMan said:

So you can not get any unsolicited inbound traffic? Or do they have your private IP in the dmz of their nat? You can make things work in a double nat, as long as the traffic is being sent to your private IP.

I would do a simple port forward to some service that is listening, be it ftp, ssh, http, telnet, something that is easy to turn on and you know is listening on your machine via netstat -an seeing the box listening on that port.

Then setup a forward on your router to that port and ip of the box listening. Then check that with canyouseeme.org -- do you see that port open.

I can walk you through a simple port open and forward check.

Thanks, I will try this when I get home, I am at school all day today. Will be home around 10:30pm Eastern time.

I think I understand what I need to do, I won't know until I actually try though, so a walkthrough would be fantastic.

depends on the server your picking, lets say you installed filezilla server, by default ftp server listens on tcp 21, so you verify ftp server is listening say on your box 192.168.1.42 via netstat -an on the .42 box, or just accessing it via 192.168.1.42 from a different box on your network - does ftp work? If so then your listening, now go to canyouseeme.org and put 21 for the port - should show closed, then setup the port forward on your router to forward 21 to your 192.168.1.42 now does canyouseeme.org show open? If so then you have atleast some inbound ports forwarded by your isp to your private IP.

If shows not open even when you forward, then your isp is not forwarding any ports to your routers private wan IP. And there is nothing you can do for running any services or having any unsolicited reaching your network.

Now you say your routers wan has a private ip?? Really, thats a really lame ISP -- you might want to change. So your saying when you look on the wan status of your router it shows 10.x.x.x, 192.168.x.x or 172.16-31.x.x ?? If this is the case your ISP is a joke, and I would switch as fast as I could get another one connected.

But if that is not an option, if your ip is private, you can reduce issues with making sure your routers nat private side is different. Ie if your routers wan is 192.168.1.0/24 then make your private lan 192.168.2.0/24 for something.. Having the same network on your wan and lan can cause you all kinds of grief -- it works sometimes, but can have issues.

I tried your steps but even after port forwarding canyouseeme.org still was unable to pick up anything through port 21 (using filezilla).

And yes the WAN status of my router shows 172.16.x.x

Right now I am with Bell Canada, I would switch... but unfortunately I can not, I live in a very bad area and don't really have any other choice (rogers offers the same service but slower - and I have read online they suffer from the same things I am currently experiencing). I had dial-up until a couple years ago (we can not get cable etc.) I am using a portable internet service that uses cell service for internet (its expensive and offers little bandwidth).

I had a different service which was much more open (allowed for NAT 1 on my PS3) however just last week they said they were discontinuing the service and I would have to convert to this new one. Sure it's faster but I went from an unlimited bandwidth plan (3mbps) at $45/month to a 3GB/month plan on a 21mbps speed (5mbps down) for $55/month going up to a max of 10GB in a month for $80. However I have 6 months unlimited, at the end of which I am sure they will have larger plans at more reasonable prices.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Send more sensitive documents to Meta. What could possibly go wrong...
    • I have not heard of that name in a while. I stopped reading his content and listening to him some time ago.
    • Consumer Reports is flat out wrong. Wouldn't be the first time it's a fact that when you have more moving parts, you have more room for failure. Less points of failure when all you replace on an EV is the tires and the wipers.
    • WYSIWYG Web Builder 20.2.2 by Razvan Serea Web Buialder is a WYSIWYG (What-You-See-Is-What-You-Get) program used to create complete web sites. WYSIWYG means that the finished page will display exactly the way it was designed. The program generates HTML (HyperText Markup Language) tags while you point and click on desired functions; you can create a web page without learning HTML. Just drag and drop objects to the page position them "anywhere" you want and when youre finished publish it to your web server (using the build in Publish tool). Web Builder gives you full control over the content and layout of your web pages. One Web Builder project file can hold multiple web pages. Desktop publishing for the web, build web sites as easy as Drag & Drop "One Click Publishing" No FTP program needed. No special hosting required, use with any Hosting Service! Easily create forms using the built-in Form Wizard plus Form validation tools and built-in CAPTCHA. Advanced graphics tools like shapes, textart, rotation, shadows and many other image effects. Fully integrated jQuery UI (Accordion, Tabs etc), animations, effects and built-in ThemeRoller theme editor. Google compatible sitemap generator / PayPal eCommerce Tools Many navigation tools available: Navigation bars, tab menus, dropdown menus, sitetree, slidemenus. Built-in Slide Shows, Photo Galleries, Rollover images, Banners etc. Support for YouTube, Flash Video, Windows Media Player and many other video formats. Unique extension (add-on) system with already more than 250 extensions available! Create HTML5 / CSS3 websites today HTML5 document type (optimized HTML5 output). HTML5 audio/video and YouTube HTML5 support. HTML5 forms: native form validation, new input types and options, web storage. HTML5 canvas and svg support in shapes and other drawing tools. CSS3 @font-face. Use non web safe fonts in all modern browsers. CSS3 opacity, border radius, box shadow. CSS3 gradients. Add cool gradient effects using native CSS3 (no images). CSS3 navigation menu. Create awesome menus without using JavaScript or images. CSS3 animations and transitions. Including support for 2D and 3D transforms! Features for advanced users: Login Tools/Page Password Protection. Built-in Content Management System with many plug-ins (guestbook, faq, downloads, photo album etc). Add custom HTML code with the HTML tools. JavaScript Events: Show/hide objects (with animation), timers, move objects, change styles etc. Layers: Sticky layer, Docking layer, Floating layer, Modal layer, Anchored layer, Strechable layer and more! jQuery Theme Manager, create your own themes for the built-in jQuery UI widgets. Style Manager (global styling, H1, H2, H3 etc). Master Frames and Master Objects: reuse common element in your website. and much more! WYSIWYG Web Builder 20.2.2 changelog: Improved: Minor change in HTML formatting of the Overlay Menu. Fixed: Issue with aspect ratio of HTML Video. Download: WYSIWYG Web Builder 64-bit | 30.1 MB (Shareware) Download: WYSIWYG Web Builder 32-bit | 28.0 MB Screenshot: >> Click here << Link: Home Page | Templates | Free extras/addons | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Collaborator
      Mighty Pen went up a rank
      Collaborator
    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      568
    2. 2
      +FloatingFatMan
      189
    3. 3
      ATLien_0
      179
    4. 4
      Skyfrog
      112
    5. 5
      Xenon
      110
  • Tell a friend

    Love Neowin? Tell a friend!