Windows 7 keeps asking "Enter Network Password" to connect to netwo


Recommended Posts

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

remove the program bonjour from your computer. this seems to be the cause of some networking issues on windows 7 machines (occasionally) ... remove.... restart every machine (and your network just to be sure) turn everything back on 5 mins later.... try again (remove bonjour from every pc most people never use/need or even know what it is )

  On 20/10/2011 at 20:41, dre2112 said:

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

  On 21/10/2011 at 18:55, Anthonyd said:

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

  On 21/10/2011 at 19:09, bjoswald said:

Have you tried removing the password and making a new one? It seems obvious but I have to ask. ;)

As mentioned above, I never created a password in the first place.

  On 21/10/2011 at 22:50, dre2112 said:

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

Screenshot plz, sounds like 3rd party software, not Windows who is bugging you.

Its not 3rd party -- this is what your seeing right?

post-14624-0-00930100-1319288885.jpg

Well then just auth and be done with it! Save your creds.

As already mentioned, easy solution for auth issues is to use the same username and password on both machines. BLANK is not a password btw.

It looks like this below:

I've also uninstalled McCafee so I am without an anti-virus. I have Windows firewall disabled too.

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

post-256760-0-01251000-1319505615.png

I purchased the computer from Dell a month ago. It came installed with Windows 7. I never set any usernames or passwords.

and that doesn't take away from the fact that I never had this problem up until a few days ago. I never had a problem connecting to my PC/printer

Thats great you never had a problem, well you have a problem now don't you.

So lets troubleshoot the issue -- clearly you changed something if was working before without you authing?? And now its not.

Post up your settings from the pc sharing the printer, and the share permissions on the printer and we can work through the issue.

As asked before -- were you in a HOMEGROUP before, which would make sense is your machines are all in a homegroup and this machine has left or is having issues with it??

Can not do anything for you unless we see your settings.

This sounds like a homegroup issue to me too. On the PC you're having trouble with, type "homegroup" and run the control panel.

Make sure the PC is in a group. If it's not, get the password from another computer that's in it and re-join it.

So did your win7 PC create a homegroup? The one that can not access the XP machine?

Need some clue to your settings so we can fix them, because clearly something is wrong.

Or you could let someone Teamviewer into the 2 machines and work it out for you. Your other machines that are accessing the printer, are they XP, Vista, 7? Do they have accounts that match up with the XP machines accounts.

Normally I setup password auth, and use usernames and passwords to auth to a machine -- this is the more secure option!!! Allowing anonymous access is never a good idea! Also keep in mind that anonymous is no longer part of the everyone group.. Just be cause you give everyone group permissions, this is not the same as anonymous.

Really this could be fixed up with like 5 minutes access to your machines. Best to see the Printer sharing machine, and a machine that is working like you want - and then the machine that is not working so can work out what is actually wrong and what settings your using - for all we know the other machines have credentials saved and are using those to auth to the machine.

But without MORE to go on then you saying its asking for auth there is no way for us to tell you what is wrong. If you want run teamviewer and PM the info and I would be happy to take a look.

  On 25/10/2011 at 01:20, dre2112 said:

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

In “Control Panel\All Control Panel Items\Network and Sharing Center” change your network to public network then in “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” have for the public profile:

network discovery on

file and printer sharding on

public folder sharing off

use 128-bit

password protected sharing off

Its how I have it setup then user name guess without typing a password.

^ NO he should not be using a public profile, he is not on a public network -- he is on a PRIVATE/HOME network -- which is the profile he should be on.

Public locks down sharing and such - blocks all inbound traffic.. Which is what he would want to be setup when he say takes his laptop to starbucks or something.

win7 will identify the network when you connect and ask what it should be, public/private, etc.. This is how you can turn off your firewall when at home, and have it ON and blocking access to your shares when at home.

Also he stated he can access this PC from his other machines - its this machine can not connect to the XP box without getting prompted for AUTH. His win7 PC should be in private/home profile not public!!

ive seen the same problem happen when setting up a new laptop for a friend, installing windows 7 home prem 64bit and when it got to the setup screen

that askes for a password he decided to power down the laptop and continue with it later. (god knows why he did this) any way when he started it back up

the next day he went to the control pannel and set his password. and when he tryed to access his NAS by clicking the orb and typing \\nas he was asked for a

username and password. how ever when i setup a totaly seprate pc built from scratch using the same OS and wen thru the entire setup procecss

inputting a username an password when asked for one, i was able to access the NAS with no problems what so ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Multiple competing launchers are unironically a gem on PC gaming—I'm not sure why people don't get that yet. Why replicate Apple's horrible control here? Multiple launchers = multiple stores → lower prices for multi-launcher games Every other con seems minute and irrelevant to a vibrant marketplace where you actually save money. The only real complaints I hear are multiple launchers idle as background tasks + people don't like opening multiple apps. For #1, maybe this OS-based launcher should do shutdown idle launchers like GOG. For #2, virtually all launchers let you create shortcuts. Voila, problem solved.
    • Xbox June Update brings unsynced save management, publisher browsing, and more by Pulasthi Ariyasinghe June has been a busy month for Microsoft, bringing major software upgrades across its product stack. It even announced new hardware for its Xbox lineup, finally entering the handheld gaming space. The company's roundup for this month's new features has now been published, and it's touting a great deal of changes. To start off on the PC side, the Xbox app on the platform now has a section to browse by publishers. The company says that this will let players easily discover more games made by their favorite developers and franchises. Copilot for Gaming also landed in beta form recently, letting users ask AI for help when a game gets too difficult. It's only available for iOS and Android for now, with ROG Xbox Ally support coming later this year. Another feature that will hit the Xbox Ally is the new universal launcher feature for the Xbox app on PC. Microsoft just kicked off Xbox Insider testing for this functionality earlier today. Get all the details here. Over on consoles, the ability to hide system apps, pin favorites to the list, and reduce the number of tiles displayed are now available. Game Hubs also arrived as a fresh feature to easily display relevant information when selecting a game to play, offering data on player stats, achievements, friends currently playing, recent captures, available add-ons, events, and more. Double-tapping the play button will quick-launch the game instead. On both Xbox consoles and in the cloud, a new progress bar will now appear when a save has been left behind on a device in an offline state. "A new progress bar, device names, timestamps, and additional details are now displayed when you have previous game saves on another device in an unsynced state," says the company. Microsoft has also added mouse and keyboard controls as well as touch controls for more cloud games this month. These join the fresh additions that have landed on the 'Stream your own game' collection and the Retro Classics app. Check out the full lists on the announcement page here. On top of all this, Microsoft has also announced that Xbox will be at Gamescom this year. While no details have been announced yet, more announcements from Xbox Game Studios may happen at the major gaming event.
    • Hopefully this is a precurser to them linking other launchers to the Xbox console. With this current gen the Xbox has had dismal sales compared to the competition. If they did support Steam, Epic, Ubisoft Connect, etc etc they'd crush on the next gen battle.
    • My update. Didn't see much point in the top panel since global menu isn't there, so going with a win/kde layout now. Overall, I would say Gnome is a disappointment - it's been 15 years and you still have to rely on a bunch of extensions to get anything useful out of it. At the same time, the way Universal Blue / Bluefin is approaching the desktop feels like what Ubuntu should have started doing five years ago (no wonder the guy I learned about this from used to work for Canonical). Maybe I should have gone with Aurora (the KDE variant), or Bazzite with KDE, but I think I have Gnome where it works for me now.       
    • GOG Galaxy offers connecting of other launchers into theirs. And while idea is interesting, I always had issues with Steam that would just lose connection and just not work. Which was annoying.
  • Recent Achievements

    • Dedicated
      Camlann earned a badge
      Dedicated
    • Week One Done
      fredss earned a badge
      Week One Done
    • Dedicated
      fabioc earned a badge
      Dedicated
    • One Month Later
      GoForma earned a badge
      One Month Later
    • Week One Done
      GoForma earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      648
    2. 2
      Michael Scrip
      225
    3. 3
      ATLien_0
      220
    4. 4
      +FloatingFatMan
      145
    5. 5
      Xenon
      136
  • Tell a friend

    Love Neowin? Tell a friend!