Windows 7 keeps asking "Enter Network Password" to connect to netwo


Recommended Posts

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

remove the program bonjour from your computer. this seems to be the cause of some networking issues on windows 7 machines (occasionally) ... remove.... restart every machine (and your network just to be sure) turn everything back on 5 mins later.... try again (remove bonjour from every pc most people never use/need or even know what it is )

  On 20/10/2011 at 20:41, dre2112 said:

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

  On 21/10/2011 at 18:55, Anthonyd said:

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

  On 21/10/2011 at 19:09, bjoswald said:

Have you tried removing the password and making a new one? It seems obvious but I have to ask. ;)

As mentioned above, I never created a password in the first place.

  On 21/10/2011 at 22:50, dre2112 said:

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

Screenshot plz, sounds like 3rd party software, not Windows who is bugging you.

Its not 3rd party -- this is what your seeing right?

post-14624-0-00930100-1319288885.jpg

Well then just auth and be done with it! Save your creds.

As already mentioned, easy solution for auth issues is to use the same username and password on both machines. BLANK is not a password btw.

It looks like this below:

I've also uninstalled McCafee so I am without an anti-virus. I have Windows firewall disabled too.

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

post-256760-0-01251000-1319505615.png

I purchased the computer from Dell a month ago. It came installed with Windows 7. I never set any usernames or passwords.

and that doesn't take away from the fact that I never had this problem up until a few days ago. I never had a problem connecting to my PC/printer

Thats great you never had a problem, well you have a problem now don't you.

So lets troubleshoot the issue -- clearly you changed something if was working before without you authing?? And now its not.

Post up your settings from the pc sharing the printer, and the share permissions on the printer and we can work through the issue.

As asked before -- were you in a HOMEGROUP before, which would make sense is your machines are all in a homegroup and this machine has left or is having issues with it??

Can not do anything for you unless we see your settings.

This sounds like a homegroup issue to me too. On the PC you're having trouble with, type "homegroup" and run the control panel.

Make sure the PC is in a group. If it's not, get the password from another computer that's in it and re-join it.

So did your win7 PC create a homegroup? The one that can not access the XP machine?

Need some clue to your settings so we can fix them, because clearly something is wrong.

Or you could let someone Teamviewer into the 2 machines and work it out for you. Your other machines that are accessing the printer, are they XP, Vista, 7? Do they have accounts that match up with the XP machines accounts.

Normally I setup password auth, and use usernames and passwords to auth to a machine -- this is the more secure option!!! Allowing anonymous access is never a good idea! Also keep in mind that anonymous is no longer part of the everyone group.. Just be cause you give everyone group permissions, this is not the same as anonymous.

Really this could be fixed up with like 5 minutes access to your machines. Best to see the Printer sharing machine, and a machine that is working like you want - and then the machine that is not working so can work out what is actually wrong and what settings your using - for all we know the other machines have credentials saved and are using those to auth to the machine.

But without MORE to go on then you saying its asking for auth there is no way for us to tell you what is wrong. If you want run teamviewer and PM the info and I would be happy to take a look.

  On 25/10/2011 at 01:20, dre2112 said:

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

In “Control Panel\All Control Panel Items\Network and Sharing Center” change your network to public network then in “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” have for the public profile:

network discovery on

file and printer sharding on

public folder sharing off

use 128-bit

password protected sharing off

Its how I have it setup then user name guess without typing a password.

^ NO he should not be using a public profile, he is not on a public network -- he is on a PRIVATE/HOME network -- which is the profile he should be on.

Public locks down sharing and such - blocks all inbound traffic.. Which is what he would want to be setup when he say takes his laptop to starbucks or something.

win7 will identify the network when you connect and ask what it should be, public/private, etc.. This is how you can turn off your firewall when at home, and have it ON and blocking access to your shares when at home.

Also he stated he can access this PC from his other machines - its this machine can not connect to the XP box without getting prompted for AUTH. His win7 PC should be in private/home profile not public!!

ive seen the same problem happen when setting up a new laptop for a friend, installing windows 7 home prem 64bit and when it got to the setup screen

that askes for a password he decided to power down the laptop and continue with it later. (god knows why he did this) any way when he started it back up

the next day he went to the control pannel and set his password. and when he tryed to access his NAS by clicking the orb and typing \\nas he was asked for a

username and password. how ever when i setup a totaly seprate pc built from scratch using the same OS and wen thru the entire setup procecss

inputting a username an password when asked for one, i was able to access the NAS with no problems what so ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ea and Ubisoft's already have a 3rd party client mode where it removes the store features from the client and only uses 60mb of ram rather than 700.... I use playnite for gog and epic games because the the third party legendary client etc Combined in playnite epic and gog only use 200mb/ram while also showing my entire library from every other platform...
    • Also, this domain thing only works with Pro version of Windows, not the home version
    • More useless bloat to kill your pc by accident
    • Windows 11 gets more customization, a Recall home page, and more in new builds by Taras Buria Microsoft kicks off this Monday with a duo of nearly identical builds for Windows Insiders in the Dev and Beta Channels. Build 26200.5661 (Dev) and 26120.4452 (Beta) are now available for download with two big changes: a new home page for Recall and the recently spotted ability to customize where system indicators appear on the screen. The new Recall home page features more personalized content to help you get back to recent activities. It displays your latest snapshots and a curated view of the top three applications and websites you have spent the most time on in the past 24 hours. Here is what it looks like: In addition, Recall received a new nav bar on the left side of the screen with quick links to Home, Timeline, Feedback, and Settings. The next big addition is the ability to change where system indicators (brightness, volume, and more) appear on the screen. Now, you can set these at the top-left corner or top-center. To adjust this, go to Settings > System > Notifications > Position of the onscreen pop-up. Here are other changes included in today's builds: [Start menu] We are adding a Boolean to the Configure Start Pins policy to allow admins to apply Start menu pins once. This means that a user will receive admin pins on day 0 but can then make any changes to their Start pinned layout and have those safeguarded. These changes can be optionally applied through the existing configuration service provider (CSP). [File Explorer] We are restarting the roll out of AI actions in File Explorer that began rolling out with Build 26120.4151. Some Insiders may have seen the feature disappear. [Settings] In the most recently flights, we have added the country or region selected during device setup under Settings > Time & language > Language & region. Here is what was fixed: [General] Fixed the issue causing the Windows Vista boot sound to play instead of the Windows 11 boot sound. Fixed an issue where the option to reset your PC under Settings > System > Recovery wasn’t working on the previous build. Fixed an underlying issue leading to certain KVM virtual machines unexpectedly failing to boot, showing “UNSUPPORTED_PROCESSOR”. The Dev build has an extra fix: Fixed the issue causing a small number of Insiders to experience repeated bugchecks with KERNEL_SECURITY_CHECK_FAILURE after upgrading to most current Dev Channel builds. Known issues include the following: [General] [IMPORTANT NOTE] When joining the Beta Channel on Windows 11, version 24H2 – you will be offered Build 26120.4250 After installing Build 26120.4250, you will be offered the most recent update available. This 2-hop experience to get onto the latest flight in the Beta Channel is just temporary. After you do a PC reset under Settings > System > Recovery, your build version may incorrectly show as Build 26100 instead of Build 26120. This will not prevent you from getting future Beta Channel updates, which will resolve this issue. Some Windows Insiders may experience a rollback trying to install this update with a 0x80070005 in Windows Update. We’re working on a fix for Windows Insiders impacted. [Start menu] The following are known issues for Windows Insiders with the new Start menu: Using touch to navigate the new Start menu may not work reliably. For example, it currently does not support the swipe-up gesture. Drag and drop capabilities are limited from “All” to “Pinned.” In some cases, duplicate entries may appear in folders on the Start menu. [Xbox Controllers] Some Insiders are experiencing an issue where using their Xbox Controller via Bluetooth is causing their PC to bugcheck. Here is how to resolve the issue. Open Device Manager by searching for it via the search box on your taskbar. Once Device Manager is open, click on “View” and then “Devices by Driver”. Find the driver named “oemXXX.inf (XboxGameControllerDriver.inf)” where the “XXX” will be a specific number on your PC. Right-click on that driver and click “Uninstall”. [Click to Do (Preview)] The following known issues will be fixed in future updates to Windows Insiders: Windows Insiders on AMD or Intel™-powered Copilot+ PCs may experience long wait times on the first attempt to perform intelligent text actions in Click to Do after a new build or model update. [File Explorer] The following are known issues for AI actions in File Explorer: Narrator scan mode may not work properly in the action result canvas window for the Summarize AI action for Microsoft 365 files when reading bulleted lists. As a workaround, you can use Caps + Right key to navigate. [Widgets] Until we complete support for pinning in the new widgets board experience, pinning reverts you back to the previous experience You can find the announcement for the Dev build here and for the Beta build here.
    • Doesn't that assume that there is only one potential use-case scenario when in fact there are millions of people who live in urban areas that only require a small fraction of that?
  • Recent Achievements

    • One Month Later
      adnan.hebibovic earned a badge
      One Month Later
    • Week One Done
      adnan.hebibovic earned a badge
      Week One Done
    • Dedicated
      tesla maxwell earned a badge
      Dedicated
    • Dedicated
      Camlann earned a badge
      Dedicated
    • Week One Done
      fredss earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      629
    2. 2
      Michael Scrip
      224
    3. 3
      ATLien_0
      220
    4. 4
      +FloatingFatMan
      144
    5. 5
      Xenon
      134
  • Tell a friend

    Love Neowin? Tell a friend!