Windows 7 keeps asking "Enter Network Password" to connect to netwo


Recommended Posts

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

remove the program bonjour from your computer. this seems to be the cause of some networking issues on windows 7 machines (occasionally) ... remove.... restart every machine (and your network just to be sure) turn everything back on 5 mins later.... try again (remove bonjour from every pc most people never use/need or even know what it is )

  On 20/10/2011 at 20:41, dre2112 said:

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

  On 21/10/2011 at 18:55, Anthonyd said:

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

  On 21/10/2011 at 19:09, bjoswald said:

Have you tried removing the password and making a new one? It seems obvious but I have to ask. ;)

As mentioned above, I never created a password in the first place.

  On 21/10/2011 at 22:50, dre2112 said:

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

Screenshot plz, sounds like 3rd party software, not Windows who is bugging you.

Its not 3rd party -- this is what your seeing right?

post-14624-0-00930100-1319288885.jpg

Well then just auth and be done with it! Save your creds.

As already mentioned, easy solution for auth issues is to use the same username and password on both machines. BLANK is not a password btw.

It looks like this below:

I've also uninstalled McCafee so I am without an anti-virus. I have Windows firewall disabled too.

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

post-256760-0-01251000-1319505615.png

I purchased the computer from Dell a month ago. It came installed with Windows 7. I never set any usernames or passwords.

and that doesn't take away from the fact that I never had this problem up until a few days ago. I never had a problem connecting to my PC/printer

Thats great you never had a problem, well you have a problem now don't you.

So lets troubleshoot the issue -- clearly you changed something if was working before without you authing?? And now its not.

Post up your settings from the pc sharing the printer, and the share permissions on the printer and we can work through the issue.

As asked before -- were you in a HOMEGROUP before, which would make sense is your machines are all in a homegroup and this machine has left or is having issues with it??

Can not do anything for you unless we see your settings.

This sounds like a homegroup issue to me too. On the PC you're having trouble with, type "homegroup" and run the control panel.

Make sure the PC is in a group. If it's not, get the password from another computer that's in it and re-join it.

So did your win7 PC create a homegroup? The one that can not access the XP machine?

Need some clue to your settings so we can fix them, because clearly something is wrong.

Or you could let someone Teamviewer into the 2 machines and work it out for you. Your other machines that are accessing the printer, are they XP, Vista, 7? Do they have accounts that match up with the XP machines accounts.

Normally I setup password auth, and use usernames and passwords to auth to a machine -- this is the more secure option!!! Allowing anonymous access is never a good idea! Also keep in mind that anonymous is no longer part of the everyone group.. Just be cause you give everyone group permissions, this is not the same as anonymous.

Really this could be fixed up with like 5 minutes access to your machines. Best to see the Printer sharing machine, and a machine that is working like you want - and then the machine that is not working so can work out what is actually wrong and what settings your using - for all we know the other machines have credentials saved and are using those to auth to the machine.

But without MORE to go on then you saying its asking for auth there is no way for us to tell you what is wrong. If you want run teamviewer and PM the info and I would be happy to take a look.

  On 25/10/2011 at 01:20, dre2112 said:

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

In “Control Panel\All Control Panel Items\Network and Sharing Center” change your network to public network then in “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” have for the public profile:

network discovery on

file and printer sharding on

public folder sharing off

use 128-bit

password protected sharing off

Its how I have it setup then user name guess without typing a password.

^ NO he should not be using a public profile, he is not on a public network -- he is on a PRIVATE/HOME network -- which is the profile he should be on.

Public locks down sharing and such - blocks all inbound traffic.. Which is what he would want to be setup when he say takes his laptop to starbucks or something.

win7 will identify the network when you connect and ask what it should be, public/private, etc.. This is how you can turn off your firewall when at home, and have it ON and blocking access to your shares when at home.

Also he stated he can access this PC from his other machines - its this machine can not connect to the XP box without getting prompted for AUTH. His win7 PC should be in private/home profile not public!!

ive seen the same problem happen when setting up a new laptop for a friend, installing windows 7 home prem 64bit and when it got to the setup screen

that askes for a password he decided to power down the laptop and continue with it later. (god knows why he did this) any way when he started it back up

the next day he went to the control pannel and set his password. and when he tryed to access his NAS by clicking the orb and typing \\nas he was asked for a

username and password. how ever when i setup a totaly seprate pc built from scratch using the same OS and wen thru the entire setup procecss

inputting a username an password when asked for one, i was able to access the NAS with no problems what so ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I had this issue and it is a nova android conflict issue. Initially the only way to fix it was clicking the screen off and then back on. Figured out it was because of a task I set up in tasker to load certain apps when I connect to my car, so fixed it by adding a 'go home' task after the app loaded and rarely have the issue now
    • I wish one of the windows updates hadn't broken glass. Is there a workaround for that I'm not aware of?
    • OpenAI announces o3 Pro, its most intelligent reasoning model by Pradeep Viswanathan OpenAI today announced o3-pro, its flagship reasoning model that uses more compute to "think harder" and provide consistently better answers. This new model will be replacing o1-pro in ChatGPT since it consistently performs better in math, science, and coding. To help everyone make the most out of the model, o3-pro supports tool calling. So, based on the user prompt, the model can do a web search, analyze files, reason about visual inputs, use Python, personalize responses using memory, and more. This is a big improvement over o1-pro, which lacked access to tools. But the downside is that o3-pro will take more time to respond. OpenAI recommends users use o3-pro in cases where reliability matters more than speed. According to OpenAI's evaluations, users consistently preferred o3-pro's responses over o3 in key domains like science, education, programming, business, and writing help. o3-pro was also rated consistently higher for clarity, comprehensiveness, instruction-following, and accuracy. The new o3-pro model is available in ChatGPT's model picker for Pro and Team. ChatGPT's Enterprise and Edu users will get access to this latest model next week. For developers, the o3-pro model comes with a 200,000 context window and is priced at $20 per million input tokens and $80 per million output tokens. OpenAI recommends developers use background mode with o3-pro to prevent timeouts. And the model has a May 31, 2024 knowledge cutoff. The OpenAI team also noted the following as the current limitations of the o3-pro model: At the moment, temporary chats are disabled for o3-pro as we resolve a technical issue. Image generation is not supported within o3-pro—please use GPT-4o, OpenAI o3, or OpenAI o4-mini to generate images. Canvas is also currently not supported within o3-pro. As OpenAI continues to refine its models, the balance between speed and reliability will likely remain a key consideration for users choosing the right tool for their needs.
  • Recent Achievements

    • Reacting Well
      rshit earned a badge
      Reacting Well
    • Reacting Well
      Alan- earned a badge
      Reacting Well
    • Week One Done
      IAMFLUXX earned a badge
      Week One Done
    • One Month Later
      Æhund earned a badge
      One Month Later
    • One Month Later
      CoolRaoul earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      541
    2. 2
      ATLien_0
      269
    3. 3
      +FloatingFatMan
      210
    4. 4
      +Edouard
      203
    5. 5
      snowy owl
      140
  • Tell a friend

    Love Neowin? Tell a friend!