Windows 7 keeps asking "Enter Network Password" to connect to netwo


Recommended Posts

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

remove the program bonjour from your computer. this seems to be the cause of some networking issues on windows 7 machines (occasionally) ... remove.... restart every machine (and your network just to be sure) turn everything back on 5 mins later.... try again (remove bonjour from every pc most people never use/need or even know what it is )

  On 20/10/2011 at 20:41, dre2112 said:

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

  On 21/10/2011 at 18:55, Anthonyd said:

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

  On 21/10/2011 at 19:09, bjoswald said:

Have you tried removing the password and making a new one? It seems obvious but I have to ask. ;)

As mentioned above, I never created a password in the first place.

  On 21/10/2011 at 22:50, dre2112 said:

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

Screenshot plz, sounds like 3rd party software, not Windows who is bugging you.

Its not 3rd party -- this is what your seeing right?

post-14624-0-00930100-1319288885.jpg

Well then just auth and be done with it! Save your creds.

As already mentioned, easy solution for auth issues is to use the same username and password on both machines. BLANK is not a password btw.

It looks like this below:

I've also uninstalled McCafee so I am without an anti-virus. I have Windows firewall disabled too.

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

post-256760-0-01251000-1319505615.png

I purchased the computer from Dell a month ago. It came installed with Windows 7. I never set any usernames or passwords.

and that doesn't take away from the fact that I never had this problem up until a few days ago. I never had a problem connecting to my PC/printer

Thats great you never had a problem, well you have a problem now don't you.

So lets troubleshoot the issue -- clearly you changed something if was working before without you authing?? And now its not.

Post up your settings from the pc sharing the printer, and the share permissions on the printer and we can work through the issue.

As asked before -- were you in a HOMEGROUP before, which would make sense is your machines are all in a homegroup and this machine has left or is having issues with it??

Can not do anything for you unless we see your settings.

This sounds like a homegroup issue to me too. On the PC you're having trouble with, type "homegroup" and run the control panel.

Make sure the PC is in a group. If it's not, get the password from another computer that's in it and re-join it.

So did your win7 PC create a homegroup? The one that can not access the XP machine?

Need some clue to your settings so we can fix them, because clearly something is wrong.

Or you could let someone Teamviewer into the 2 machines and work it out for you. Your other machines that are accessing the printer, are they XP, Vista, 7? Do they have accounts that match up with the XP machines accounts.

Normally I setup password auth, and use usernames and passwords to auth to a machine -- this is the more secure option!!! Allowing anonymous access is never a good idea! Also keep in mind that anonymous is no longer part of the everyone group.. Just be cause you give everyone group permissions, this is not the same as anonymous.

Really this could be fixed up with like 5 minutes access to your machines. Best to see the Printer sharing machine, and a machine that is working like you want - and then the machine that is not working so can work out what is actually wrong and what settings your using - for all we know the other machines have credentials saved and are using those to auth to the machine.

But without MORE to go on then you saying its asking for auth there is no way for us to tell you what is wrong. If you want run teamviewer and PM the info and I would be happy to take a look.

  On 25/10/2011 at 01:20, dre2112 said:

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

In “Control Panel\All Control Panel Items\Network and Sharing Center” change your network to public network then in “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” have for the public profile:

network discovery on

file and printer sharding on

public folder sharing off

use 128-bit

password protected sharing off

Its how I have it setup then user name guess without typing a password.

^ NO he should not be using a public profile, he is not on a public network -- he is on a PRIVATE/HOME network -- which is the profile he should be on.

Public locks down sharing and such - blocks all inbound traffic.. Which is what he would want to be setup when he say takes his laptop to starbucks or something.

win7 will identify the network when you connect and ask what it should be, public/private, etc.. This is how you can turn off your firewall when at home, and have it ON and blocking access to your shares when at home.

Also he stated he can access this PC from his other machines - its this machine can not connect to the XP box without getting prompted for AUTH. His win7 PC should be in private/home profile not public!!

ive seen the same problem happen when setting up a new laptop for a friend, installing windows 7 home prem 64bit and when it got to the setup screen

that askes for a password he decided to power down the laptop and continue with it later. (god knows why he did this) any way when he started it back up

the next day he went to the control pannel and set his password. and when he tryed to access his NAS by clicking the orb and typing \\nas he was asked for a

username and password. how ever when i setup a totaly seprate pc built from scratch using the same OS and wen thru the entire setup procecss

inputting a username an password when asked for one, i was able to access the NAS with no problems what so ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Come the hell on, do we need clickbait titles? "Overwatch 2" - 11 characters "a popular multiplayer hero shooter" - 34 characters What's the purpose here - delivering news or titles for clicks? I think we all know the answer. You're straying into "Number 7 on this list will SHOCK you" territory and while it may work on some crappy sites, this is why they are crappy sites. Just tell the story! Go back and look at popular articles that made Neowin what it was. Did they have headlines of "New OS from major technology conglomerate has astonishing new feature" or is it likely to tell the story succinctly and then elaborate within the content?
    • You can now generate video clips with sound using Veo 3 in Google Vids by David Uzondu Last month, we reported that Google was adding its Veo 2 video generation model into the Google Vids editor. The company has now followed that by rolling out its latest Veo model, Veo 3, which was unveiled at I/O 2025 and went viral recently for its shockingly realistic clips. The main addition this time is the ability to generate both video and synchronized audio directly from a text prompt. Anyone with a compatible Google Workspace plan can now generate 8-second clips right inside a Vids project. You find the "Generate video" icon in the editor, pick Veo 3, and then type out what you want to see and hear. Google's examples include things like a spokesperson delivering a line for a product demo or an employee giving an intro to a safety video. The model is good enough to generate dialogue that actually syncs with the character’s lips. Once you create a clip, you can just insert it into your video. And, if the audio it spits out is garbage, you have the option to mute the clip. The generated clips are currently capped at 720p resolution and run at 24FPS, a far cry from the 4K potential Veo 3 has as a standalone model. Still, getting functional audio generation built-in is a huge step. This native sound capability is what really sets it apart from competitors like OpenAI's Sora, which primarily generates silent videos. Google began pushing out the feature recently, but do not worry if you do not see it immediately in your account. The company is doing a gradual rollout that can take up to 15 days to complete, so your access will depend on which wave your account is in and whether your company's admin uses the Rapid or Scheduled Release track. Access is fairly widespread for paying customers on Google Workspace, including those on Business Standard and Plus, as well as Enterprise Standard and Plus plans. It is also available for Essentials, Nonprofits, and even the lower-tier Business Starter and Enterprise Starter plans. For now, the AI generation only understands prompts in English, and all videos are invisibly watermarked to identify them as AI-generated.
    • My dear freedonX, have you thought about giving Linux a try? If you don't want to be nagged, that's surely the best place to go. And as long as you stick to something simple, you won't need to touch the command line once.
    • For windows, you have winget and chocolatey. For linux, you've got other package managers depending of the base, apt, dnf, zypper, pacman... I dunno about Mac, but even if it doesn't have an accessible package manager, there surely is a store, or worst case, http requests, curl, wget, or something similar.
  • Recent Achievements

    • First Post
      Kurotama earned a badge
      First Post
    • Collaborator
      Carltonbar earned a badge
      Collaborator
    • Explorer
      MusicLover2112 went up a rank
      Explorer
    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      ATLien_0
      270
    3. 3
      +FloatingFatMan
      247
    4. 4
      +Edouard
      201
    5. 5
      snowy owl
      168
  • Tell a friend

    Love Neowin? Tell a friend!