Windows 7 keeps asking "Enter Network Password" to connect to netwo


Recommended Posts

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

remove the program bonjour from your computer. this seems to be the cause of some networking issues on windows 7 machines (occasionally) ... remove.... restart every machine (and your network just to be sure) turn everything back on 5 mins later.... try again (remove bonjour from every pc most people never use/need or even know what it is )

  On 20/10/2011 at 20:41, dre2112 said:

I have 3 computers and 1 laptop on a home network and all of a sudden my laptop cannot connect to the PC with the printer attached to it. Every time I try to print I get an error message so I checked and when I try to access the PC from my laptop through the network it keeps asking me to enter a password.

I never had this problem before. I never had to enter a password before, btu all of a sudden it asks me for one. I have file and printer sharing ON and network passwords OFF but it still asks for one when accessing the PC from my laptop. None of the other PCs/laptops on my network require a password to connect to that PC.

It's driving me nuts!

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

  On 21/10/2011 at 18:55, Anthonyd said:

Does it asks for a user password or homegroup password?

Also, are you using any firewall? Make sure that you have selected the good network profile (you know, where it asks you between home/enterprise or public).

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

  On 21/10/2011 at 19:09, bjoswald said:

Have you tried removing the password and making a new one? It seems obvious but I have to ask. ;)

As mentioned above, I never created a password in the first place.

  On 21/10/2011 at 22:50, dre2112 said:

It's asking for a "network password"

Firstly, I have this setting disabled. Second, I never even set it up to have a password. I have the firewall disabled but I'll take a look at it again

Screenshot plz, sounds like 3rd party software, not Windows who is bugging you.

Its not 3rd party -- this is what your seeing right?

post-14624-0-00930100-1319288885.jpg

Well then just auth and be done with it! Save your creds.

As already mentioned, easy solution for auth issues is to use the same username and password on both machines. BLANK is not a password btw.

It looks like this below:

I've also uninstalled McCafee so I am without an anti-virus. I have Windows firewall disabled too.

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

post-256760-0-01251000-1319505615.png

I purchased the computer from Dell a month ago. It came installed with Windows 7. I never set any usernames or passwords.

and that doesn't take away from the fact that I never had this problem up until a few days ago. I never had a problem connecting to my PC/printer

Thats great you never had a problem, well you have a problem now don't you.

So lets troubleshoot the issue -- clearly you changed something if was working before without you authing?? And now its not.

Post up your settings from the pc sharing the printer, and the share permissions on the printer and we can work through the issue.

As asked before -- were you in a HOMEGROUP before, which would make sense is your machines are all in a homegroup and this machine has left or is having issues with it??

Can not do anything for you unless we see your settings.

This sounds like a homegroup issue to me too. On the PC you're having trouble with, type "homegroup" and run the control panel.

Make sure the PC is in a group. If it's not, get the password from another computer that's in it and re-join it.

So did your win7 PC create a homegroup? The one that can not access the XP machine?

Need some clue to your settings so we can fix them, because clearly something is wrong.

Or you could let someone Teamviewer into the 2 machines and work it out for you. Your other machines that are accessing the printer, are they XP, Vista, 7? Do they have accounts that match up with the XP machines accounts.

Normally I setup password auth, and use usernames and passwords to auth to a machine -- this is the more secure option!!! Allowing anonymous access is never a good idea! Also keep in mind that anonymous is no longer part of the everyone group.. Just be cause you give everyone group permissions, this is not the same as anonymous.

Really this could be fixed up with like 5 minutes access to your machines. Best to see the Printer sharing machine, and a machine that is working like you want - and then the machine that is not working so can work out what is actually wrong and what settings your using - for all we know the other machines have credentials saved and are using those to auth to the machine.

But without MORE to go on then you saying its asking for auth there is no way for us to tell you what is wrong. If you want run teamviewer and PM the info and I would be happy to take a look.

  On 25/10/2011 at 01:20, dre2112 said:

As for the PC with the printer... all the other computers on the network work fine and use the printer without issue. Even the printer PC can connect to my laptop but not my laptop to the printer-PC

In “Control Panel\All Control Panel Items\Network and Sharing Center” change your network to public network then in “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” have for the public profile:

network discovery on

file and printer sharding on

public folder sharing off

use 128-bit

password protected sharing off

Its how I have it setup then user name guess without typing a password.

^ NO he should not be using a public profile, he is not on a public network -- he is on a PRIVATE/HOME network -- which is the profile he should be on.

Public locks down sharing and such - blocks all inbound traffic.. Which is what he would want to be setup when he say takes his laptop to starbucks or something.

win7 will identify the network when you connect and ask what it should be, public/private, etc.. This is how you can turn off your firewall when at home, and have it ON and blocking access to your shares when at home.

Also he stated he can access this PC from his other machines - its this machine can not connect to the XP box without getting prompted for AUTH. His win7 PC should be in private/home profile not public!!

ive seen the same problem happen when setting up a new laptop for a friend, installing windows 7 home prem 64bit and when it got to the setup screen

that askes for a password he decided to power down the laptop and continue with it later. (god knows why he did this) any way when he started it back up

the next day he went to the control pannel and set his password. and when he tryed to access his NAS by clicking the orb and typing \\nas he was asked for a

username and password. how ever when i setup a totaly seprate pc built from scratch using the same OS and wen thru the entire setup procecss

inputting a username an password when asked for one, i was able to access the NAS with no problems what so ever.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Maybe, just maybe... and it isn't you... there are some people who like the Windows 11 UI (for whatever reason) and want a better backend.
    • Gundams to arrive in Call of Duty: Mobile with new mech mode and unique third-person combat by Paul Hill Activision has announced that Call of Duty: Mobile will see the launch of Season 6 “Gundams Arrive” on July 2 at 5PM Pacific Time. This major collaboration between the world’s most popular FPS franchise and the Gundam franchise will introduce a new, limited-time mode called Gundam Team Deathmatch where 8 players will face off 4v4 and pilot Gundam-themed operators such as Ethan - Freedom Gundam, Reaper - Sazabi Gundam, Proton - v Gundamo, Deathscythe Gundam (EW). When playing in this game mode, players will notice a switch from the usual first-person view to the third-person perspective. The new game mode will also feature specific abilities and weapons that are unique to Gundam suits rather than player loadouts. The new Gundam Team Deathmatch mode will be played on a new map called interstellar space station, which has been designed for this mode. When playing, you’ll discover that the mech suits offer specialized mobility such as dodge, sprint, and vertical jets. In the post-match, players will be able to watch Gundam operator animations with unlockable rewards for viewing. You can unlock more animations by participating in Gundam Team Deathmatch, normal Multiplayer, and Battle Royale modes. There will also be Gundam-themed in-game events, such as Survival of the Fittest, which will give players free rewards like the new legendary weapon J358 — Fin Funnel v Gundam, Urban Tracker — Defense Force, Cyro Bomb — Haro (reskin), Emote — Haro Team, new camos, and more. Players will also be able to obtain a variety of items through Season 6 Battle Pass free and premium tiers, including sci-fi-themed Operators and Weapon Blueprints. Players on the free tier will get access to the bolt-action 3-Line Rifle based on a World War II design and is capable of inflicting high damage with high accuracy. Free tier players will also have the chance to earn other rewards such as Skins, Weapons Blueprints, Vault Coins, and more. Players looking to spend money can get the Premium Pass. These players will have a chance to get all of the content from Season 6 including tactical warriors like Silver — Chrome Dome Reskin, Misty — Science Pilot, Atlas — Dust Ranger, and The Marshal — Rock Hound; and Weapon Blueprints like the BP50 — Pathripper, Oden — Maevwat Technical, PDW-57 — Rocket Re-Entry, BY15 — Dark Moon, and the 3-Line Rifle — Geo Thermal Line, based on the new Season 6 weapon. There’s also Battle Pass Subscription which gives you additional monthly rewards along with a 10% boost to Player and Weapon XP, discount coupons, and limited discounts on 10x crate pulls. Activision also stated that Mythic Drops are returning to the Mythic store and that Battle Pass Vault is getting Season 9 — Zombies Are Back (2022) and Season 6 — Templar's Oath (2023).
    • I managed to buy the original Hellblade: Senua’s Sacrifice through the ps app on my phone even though it was not showing up in the ps store when browsing from my ps5 it was buggy but more or less O.K.ish to play… I wonder if this original added version is funny fixed up for ps5 play
    • Download old Windows Startup Sounds @ https://www.winhistory.de/more/winstart/winstart_en.htm
  • Recent Achievements

    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
    • One Year In
      Bert Fershner earned a badge
      One Year In
    • Reacting Well
      ChrisOdinUK earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      550
    2. 2
      ATLien_0
      205
    3. 3
      +FloatingFatMan
      173
    4. 4
      Michael Scrip
      151
    5. 5
      Som
      131
  • Tell a friend

    Love Neowin? Tell a friend!