AT&T U-verse ping/latency


Recommended Posts

I'm thinking about going from comcast cable to uverse since its a lot cheaper. I'm concerned about ping since I found a couple threads on the uverse forums with some complaints about high pings in gaming. I'd like to know how your experience has been with uverse and what kind of pings your getting. If you could post what state your in that'd be helpful too.

Link to comment
https://www.neowin.net/forum/topic/1035929-att-u-verse-pinglatency/
Share on other sites

I was with Time Warner before Comcast bought them out here in Houston and loved them. Around 2008/2009, I switched to AT&T U-Verse and boy did we have issues with the TV'S and Internet. When one thing went down, it all went down. Speeds were very slow even with the 24MBPS.

I'm currently back with Comcast and had 1, 5 minute outage because of rain. 35 MBPS and 10-50 ping is perfect. AT&T was giving me about 80-200 during early morning hours. I would stick with Comcast, if you are not in a 2 year plan, I advised you to try to get into a non-contract as this is when they make up for their summer deals, we are actually in a cheaper plan with 2 cable boxes and faster internet with comcast than we had with U-Verse.

I agree with almost everyone here... the AT&T U-verse pings are high(er) than I would like or expect. I live in Houston, and my pings are always 35ms or higher. My brother, who lives in the same apartment complex, has Comcast and I have never seen his pings (to the same servers) higher than 10ms.

As the above poster stated, this is with the fastest U-Verse residential package. I'm considering switching to Comcast Internet, but I like the convenience of having all my bills (TV, Internet, Wireless) with the same provider... however I'm strongly considering getting Comcast for Internet. It's also worth mentioning that U-Verse TV is better than Comcast Xfinity in most regards, except for one of the most important: picture quality. The PQ of cable is better than U-Verse IPTV but the DVR, Guide, mobile apps, and web GUI for U-Verse are significantly better than Xfinity.

well uverse is getting hooked up in a week. hopefully the pings are not to bad. I pay $60 for comcast 12megs, the uverse is almost half the money for same speed. they are bringing a modem/router combo device. I want to use my existing linksys wrt54g router. can I avoid using the router part of their device and they can just feed internet into my router.

well uverse is getting hooked up in a week. hopefully the pings are not to bad. I pay $60 for comcast 12megs, the uverse is almost half the money for same speed. they are bringing a modem/router combo device. I want to use my existing linksys wrt54g router. can I avoid using the router part of their device and they can just feed internet into my router.

You have to use their router... but nothing says you can't go from it to your own router.

Also, you can go into the settings and change things a bit. For example, I turned off it's wireless capabilities because

I absolutely hate using wireless. The numerical password will be located on the router, itself.

You have to use their router... but nothing says you can't go from it to your own router.

Also, you can go into the settings and change things a bit. For example, I turned off it's wireless capabilities because

I absolutely hate using wireless. The numerical password will be located on the router, itself.

Ok, would I just plug a ethernet into the broadband port on the uverse device and the other end into the lan port on my linksys router? do I need to change any settings on my router? thanks.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!