Recommended Posts

I have an issue where whenever I download, there is a good chance the internet will drop out and I'll have to reset my wireless adapter through the Control Panel to get things running again.

I am not even slightly knowledgable on network related stuff, so instead of going down a potentially long and frustrating route of trying to sort the issue out, I'm wondering if there is a quick way to reset my wireless adapter without having to go through all of the menus and the troubleshooting menus.

This is a bit of a shot in the dark but is there a way to quickly do it? Whenever it happens having I have to wait for the troubleshooting to discover the problem and then fix it, whereas I know that just resetting the wireless adapter straight away would fix it.

  On 02/11/2011 at 17:00, TheReasonIFailed said:

What OS?

This should work on Vista/7.

To disable: netsh interface set interface <interface name> DISABLED

To enable: netsh interface set interface <interface name> ENABLED

I'm on windows 7, where do I type that?

  On 02/11/2011 at 17:03, SHoTTa35 said:

Just resetting the network card brings things back up? Sounds like some offloading going wrong or something. What about upgrading/downgrading drivers?

I think i have the latest drivers but I'll double check.

  On 03/11/2011 at 13:41, ramsy66 said:

I'm on windows 7, where do I type that?

You'd have to go to the command prompt. Click Start - Type "CMD" - right click and choose admin then type those commands replacing the "<interface name>" with WLAN or whatever the name is.

It's a bit complicated I guess, but you should probably be looking for a real solution instead of bypassing the issue. When you say internet drop out you mean you loose all connectivity or just to the internet. Meaning, can you still ping the router or connect to it or you can't connect to anything?\

Which wireless card is this as well?

Yeah internet dropping or wireless card hanging while downloading should not be happening.. A reset of the wireless card might be a work around but is not the correct path to take.

You need to figure out what is wrong and correct, not some stupid bandaid of resetting the interface.

A quicker way to reset though would be to just disable it and then enable it - this is exactly what that command line is doing, but you can do it in the gui with just click.. Which I believe would be much easier, or you could just create a batch file with the commands and then put a shortcut on your desktop to click.

But again this is not really a solution I would suggest. You really should fix the root of the problem!

  On 03/11/2011 at 14:11, SHoTTa35 said:

You'd have to go to the command prompt. Click Start - Type "CMD" - right click and choose admin then type those commands replacing the "<interface name>" with WLAN or whatever the name is.

It's a bit complicated I guess, but you should probably be looking for a real solution instead of bypassing the issue. When you say internet drop out you mean you loose all connectivity or just to the internet. Meaning, can you still ping the router or connect to it or you can't connect to anything?\

Which wireless card is this as well?

it can still recognize and connect to routers, it's just the internet that drops.

it's a tp-link tl-wn851n

Sounds like a simliar problem I had with a laptop, I ended up replacing the wireless card for a new one and everything worked fine after that.

It would randomly drop the wireless when downloading large files/videos/etc after that it would tell you it could see the wireless network it was attached to or that it could see others but it was XP feeding back rubbish information and none of that was actually working as intended.

only fix was to shut down the wireless card (using wifi button or disable/enable in windows) then it would come back to life, drivers etc didn't fix it. New card (as mentioned above) and it all went away :)

Laptop was an old IBM, if that makes a difference

  On 08/11/2011 at 12:34, Teebor said:

Sounds like a simliar problem I had with a laptop, I ended up replacing the wireless card for a new one and everything worked fine after that.

It would randomly drop the wireless when downloading large files/videos/etc after that it would tell you it could see the wireless network it was attached to or that it could see others but it was XP feeding back rubbish information and none of that was actually working as intended.

only fix was to shut down the wireless card (using wifi button or disable/enable in windows) then it would come back to life, drivers etc didn't fix it. New card (as mentioned above) and it all went away :)

Laptop was an old IBM, if that makes a difference

i had the same issues using a belkin wireless dongle on my previous computer. i don't think the issue is the card but how the network is set up maybe. i have no idea where to start :s

"i don't think the issue is the card but how the network is set up maybe."

No highly unlikely -- what could you have setup in the network that would cause the card to reset or hang? Wireless is pretty stupid easy, you setup a WPA psk, or even just OPEN and your done.. There is is nothing to do other than configure the SSID and encryption you want use or not use.

If its crashing, then something wrong with the card/driver or the wireless router. Not any sort of setup in the wireless config that would cause such an issue.

Maybe the card does not like WEP, WPA or WPA2 -- try just open, do you still have the issues? If not then something wrong with there router or card/driver/OS -- if you can connect to the wireless network and it works, then there is not much tweaking or such that could be done that would cause your symptoms.

Other than going open on the encryption -- you could fire up a liveCD and see if you have same issue. if you do not then points to driver/OS issue.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No operating system works well with programs that modify its interface. There will always be bugs, whether it's MacOS or Linux. Windows too, you'll only suffer from bugs using this crap software.
    • KDE brings UI improvements, bug fixes and more to Plasma 6.4 as stable release draws near by David Uzondu With less than a month to the release of Plasma 6.4, the KDE dev team has shared what it has been working on in the latest issue of its weekly roundup. The update shows a heavy focus on user interface polish and a whole slew of bug fixes as the June 17 release date gets closer. The team has pushed a number of UI refinements for the upcoming version. On the System Settings page for Wi-Fi, the network list can now be fully navigated with a keyboard. KDE also disabled the ability to drag and drop displays on top of one another in the monitor settings. This was done because it could create unsupported arrangements that triggered a cascade of strange bugs throughout the system. Waking up a sleeping computer by pressing the power button no longer causes the bizarre logout screen to appear after you unlock it, which is a relief. Alignment issues in the settings page for the Digital Clock widget were also resolved. The list of bug fixes for 6.4 is extensive. The development team has fixed the most common crash affecting the System Monitor and squashed another one related to a divide-by-zero error. For users with multiple monitors, a long-awaited fix has landed that prevents windows from disappearing when the screen they are on gets disconnected. Even the humble Sticky Notes widget received attention; it will no longer freeze the Plasma shell if you place it on a very thick panel. Discover, the software center, also had a bug patched that caused it to crash if closed too quickly after launch. Here's the full list of improvements: Putting a Sticky Note widget on a very thick panel can no longer cause Plasma to freeze; now, you can use a thick panel with a sticky note on it as a notes sidebar. Fixed the most common System Monitor crash. Fixed another crash in System Monitor, this time a divide-by-zero. Fixed a case where xdg-desktop-portal-kde could crash after you choose a video source to start streaming. Fixed a bug that caused Discover to crash if you close it immediately after it launched. Fixed multiple subtle bugs with the screen chooser widget and OSD that caused it to do the wrong thing on rotated screens or when mirroring screens. Fixed a bug that caused the System Settings’ search field not to be focused properly when pressing Ctrl+F while any UI elements in a settings page already had focus. Fixed the root cause of multiple issues involving windows disappearing when you disconnect the screen they’re on. Clicking a button on a desktop widget that opens a menu no longer inappropriately makes the widget enter Widget Edit Mode. Files with a # or ? character in their name or full path are no longer unexpectedly missing from the history lists in Kicker/Kickoff/etc launchers. Fixed a bug that caused the screen chooser window to sometimes not appear as expected when OBS was launched. Fixed a bug that caused tiled windows on a multi-screen setup to lose their tiling settings when the system went to sleep and woke up again. The "Move window to [activity]" feature now works properly when invoked from the Task Manager widget. Fixed a bug in the Kicker Application Menu that caused keyboard navigation not to work if the popup opened with an item under the pointer. In the Overview effect’s grid view, dragging windows tiled on one virtual desktop over to a different virtual desktop now keeps them tiled as expected. The focus may be on the imminent 6.4 release, but work on what comes next never really stops. Looking ahead, development on Plasma 6.5 is already well underway. Just last week, the KDE team brought several performance improvements to Plasma 6.5.0. This week, the team fixed a nagging bug that sometimes caused the Networks widget to think a hotspot was still enabled after disconnecting from Wi-Fi. On the features side, the System Settings' Fonts page now prevents you from breaking your system entirely by setting fonts below 4pt. In addition to that, switching time spans in the Info Center’s energy page now features smooth graph animations. Performance-wise, kwriteconfig should also be faster, allowing changes you made to the keyboard layout using the tool to reflect immediately.
    • Display Driver Uninstaller (DDU) 18.1.1.4 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.1.4 changelog: Intel: Added NPU presence detection before removing shared DLL files (these were previously left to prevent potential NPU-related issues). Intel: Added optional NPU removal Improved "Extension" driver removal process. Updated several translations. Download: Display Driver Uninstaller 18.1.1.4 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot | Forum Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • That is what I also think to a point. How is 26 necessarily different than just another iteration like 18, 19, 20, etc? At first I think it would be better for Apple to use 2026, 2027, and then maybe truncate it to just 28, 29, and so on. Granted, I also think it makes more sense to use the year when it was released (2025 or 25), not 26/2026. Maybe Apple's thinking is as stated by Aditya that the bulk of a release being the current release is during the following year (2026, for example) after it is released (2025, for example). There are other examples of these sorts of things. In the NBA, the season has always started in the Fall and ends in the Spring. When the season ends is how the season is named. So, this is the 2025 NBA season and the Pacers and Thunder are playing to be the 2025 NBA Champions. The NFL starts in the Fall and the end of the season is always in the beginning of the next year as well. The Super Bowl was played on February 9, 2025, but that was the end of the 2024 NFL season. So, contrary to the NBA, the NFL names it season based on when it starts, not when it ends. Maybe that is because more of the NFL season is played at the end of the year (2024 in the most recent example) whereas most of the NBA season is played in the first half of the following year (2025 in the current example).
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      snowy owl
      252
    3. 3
      +FloatingFatMan
      251
    4. 4
      ATLien_0
      228
    5. 5
      +Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!