Should I defragment my (18% fragmented) SSD?


Recommended Posts

Disk Defragmenter is reporting my 60GB SSD is 18% fragmented.

I have never defragmented the SSD as the general consensus seems to be that it's unnecessary on SSDs and if anything, it shortens the life of them.

Should I defragment it?

No.

Next time you format you should do a proper "clean" of the drive (empty all the cells (I have no idea what the correct term for it is D:))

OCZ offer a tool to clear the memory state when you format. Well worth it imo :)

i've been wondering if defraging is actually needed on an SSD, and there are 2 things that i always come accross.

1, the whole thing that SSD don't have a disc so arn't effected by fragmented files.

2, defragging the drive wares it out and lowers the life expectancy of the drive.

imo both are true and it's really not worth doing, no matter how annoying it is to see that the drive is fragmented, it will keep happening as you add and remove files, and it's only going to lower the life of the drive rather than speed things up.

  • Like 1

The reason fragmented files are bad on spinning platter disks is that the file ends up all over the disk, which means that the disk head has to move all over the joint to read the information. This movement takes time, not to mention you then need to wait for the right part of the disk to spin under the head..

With a solid state disk, there are 0 moving parts, so file location is COMPLETELY irrelephant (like an elephant).

The clearest demonstration of this is in response time (latency for those of you who use such terms). Average hard disk is like 30ms, average SSD is less then 1ms (0.01 I believe, but am not willing to stand by..)

  • Like 4

"Drive C is a flash-based solid state drive. Due to the physical build of SSDs, their performance cannot be improved by defragmentation.

An SSD's flash memory is bound to a physical maximum of write access times. A defragmentation can influence the wear levelling algorithms of the SSD and shorten the life span of the drive" - O&O Defrag.

My SSD is 20% fragmented but it's as quick as the day I first installed it.

It's TRIM. :)

No it's not..

Trim is an operation performed on a disk with the intent of clearing out unused spaces to accelerate later writes (by removing the delete cycle before the write). This operation is performed while the disk is in use and and filled with data.

Although the same task is performed at a most simplistic of assessments; It is not the same thing..

No it's not..

Trim is an operation performed on a disk with the intent of clearing out unused spaces to accelerate later writes (by removing the delete cycle before the write). This operation is performed while the disk is in use and and filled with data.

Although the same task is performed at a most simplistic of assessments; It is not the same thing..

i'm thinking it's just a effort-saving utility that combines a secure erase with TRIM. I certainly haven't heard of any special blanking tool for my drive (Intel).

absolutely not. you defragment magnetic disks because they excel at sequential reads and suck at random read/writes. SSDs aren't mechanically limited and suffer no performance issues for fragmented files and defragmenting it will only cause damage to your drive.

sequential read is still a good deal faster then random read on all the SSD's I've worked with so far... seems like it shouldn't be that way but all the benchmarks have been that way

I'm putting this mainly on the drives chipset being crap still in a bunch of cases

My SSD (C:\ 2 x Intel X25-M). Beat that :p

6391f0058af57e8d372d767ddfb0b.jpg

The only factor affecting the performance right now is the fact that the SSDs cannot be trimmed because Intel RST drivers (drivers for the ICH controller) can't pass the "trim" command on a RAID array. (Coming in RST 11.5 in theory). But the fact that the disks are fragmented (well the data on the disks to me more precise) doesn't affect significantly the performance. Access time is still lightning fast

Put your computer on sleep mode few the next few nights and your SSD will get a speed boost because of TRIM

What you're describing is called garbage collecting I think, not trim. Not every SSD disks support garbage collecting. OCZs do, maybe Corsair too. Intel SSDs don't. My old Vertex (1st gen) do and it is pretty efficient.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I wonder what that line really meant...
    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!