• 0

bittorrent limited to 20% download speed


Question

Hey so I am playing on my new 100mbps connection and am downloading the largest, fastest file i could find that was legal. openSUSE dvd image. http://software.opensuse.org/121/en

Problem is, the download speed is only about 20-25% of my maximum potential. the file starts downloading at 10MB/S and then the speed drops to 1.2-2.8 MB/s... I don't get it. why would this happen? I have ran tests and know that my isp isn't limiting bittorrent activity. If i use the direct download link, i get 8MB/s...

is there a setting with utorrent? I am no expert with torrents and everything is set to whatever defaults the setup guide chooses for me.

i shoudl mention that there isn't much uploading going on and there is nothing else using the network.

16 answers to this question

Recommended Posts

  • 0

it's not a port forwarding issue, I looked into that. I am connected to 40+ peers just not downloading very fast.

My provider is not doing anything to my bandwidth. I used the extensive tests here http://broadband.mpi-sws.org/transparency/bttest-mlab.php?

I have also asked them and they said they don't do traffic shaping for any reason.

  • 0

Let me know what you find. I rarely see above 5 MB/sec - only get about 4 - 4.5 MB/sec in Steam & about 2.5 via http.

Just to be sure of your connection - go to MySpeed Visualware & see what you test @ It seems to be a little less flaky as opposed to speedtest.net

  • 0

Most ISPs now have traffic shaping (and they will never tell u they do that), and mostly that is the case with you :)

there is an encryption option (in your torrent application settings) so ur ISP wont detect that ur downloading torrent, give that a try.

Also try Half-Open Outbound TCP Connections, I know vista is only 10 connections (not sure about W7)

Edit: Half-open port limitation is removed with windows vista SP2, (so mostly it wont be there in W7).

  • 0

My speed visualware returns the same results as speedtest.net. I tried downloading the ubuntu torrent from their website but the file is too small to show results. It starts out strong at 10MB/s and drops to 5MB/s but not all the way down because it finishes within seconds.

This speed is of course the reason I don't think my isp is shaping my traffic. further, did you look at the link i posted? http://broadband.mpi...ttest-mlab.php? this thing basically tests your isp and tells you if your bandwidth is being limited in any way. I tried getting 5 different torrents to download at the same time to see if they will cap my connection but they all slowed down just enough so that my overall download speed was 3.1MB/s...... also forcing encryption didn't help much. I have the same speed fluctuation that leads to a slow overall speed in the end.

  • 0

Who is your service provider.

They could be traffic shaping.

This. Either that or it's the torrent your using.

Try downloading a reliable torrent (e.g, the ubuntu ISO), which you know has thousands of seeders available, and see what happenes.

If it is traffic shaping, then perhaps look into Usenet or perhaps a VPN.

  • 0

"If i use the direct download link, i get 8MB/s..."

You understand that your going to be limited by SENDING speed right??

Doesn't matter if there are 1000 seeds, your not going to connect to all of them. And there is OVERHEAD with torrents, And the seeds only send at a certain speed.

So you download ubuntu in seconds and your complaining? The DVD which what 1.5GB?

You can not take 100mbit and /8 and think your going to see 12.5MBps down -- you don't even see that on lan transfers. For starters you never actually get 100mbit, high 90's etc..

So what does your speedtest show exactly, and what are you uploading at during these torrent downloads? What is your upload speed? There is a ratio you want to set for best downloads, if your not sending fast enough peers will not send to you as fast as they can, etc.

With peers you have ###### for tat in upload/download with seeds you don't so you really want to be connecting to seeds for BEST download. The number of which matter and the total number of connections you have set matter, etc. etc.

So you have run through the setting wizard for your speeds and settings? What were those settings?

  • 0

1651081536.png

for the open suse download I am connected to 67 peers right now. my upload speed is set at 5600kB/s but that torrent doesn't really use more than 100kB/s upload stream. I am not expecting 12MB/s but I would like something around 9 at least. the thing that's making me think twice is the fact that the limitation is always around 2-3MB/s.

the suse torrent downloads at 2.8MB/s on average. I run 3 instances of it and you would think this would almost add up but that's not happening. I am getting about the same 2.8 average overall download speed.

oh and budman I know you are gonna comment on the 0ms ping. people brought it up in my other tread a week ago when I had just gotten the connection setup. I pinged my gateway like you said, here is the result. I don't know how to make cmd show milliseconds.

C:\Users\capr>ping 216.243.60.1

Pinging 216.243.60.1 with 32 bytes of data:

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Ping statistics for 216.243.60.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Users\capr>

  • 0

Well that is Freaking Screaming connection! Windows ping doesn't show less than 1.

Do a traceroute to the server your testing against, and we should see if your ping should be <1 the whole way. As I brought up in the other thread, I doubt the server you speedtesting with is connected to your gateway ;)

Ok lets do the math 95.37/8 does not = 12, sorry! Close but not 12, not take into account the overhead of moving a file your never going to see even 11.92MBps in p2p with that connection. There is just too much overhead with it to say you can actually fill your pipe. Your getting replies from other peers, How many actual connections do you have going - look at your router for this state info, if not on your machine running utorrent. Can your router actual handle the number of connections without getting into trouble? What router do you have?

As to your upload vs your download, if you mostly working with torrents that have lots of seeds you wont see much upload since everyone pulls from the seeds vs peers. With seeds there is no ###### for tat, they have the whole thing they don't you need you to send them part of it, etc.

2.8 is about 23Mbps -- maybe that is what your isp lowers too after specific amount of time? Do they do any sort of speedboosting crap like comcast? So on speedtest I see like 25Mbps, but sustained transfers it lowers to around 16Mbps

Are you using encryption on your settings? Maybe its a limitation of the software on your computer, writing to disk, etc. Someone would have to do some testing with local only seed since the speeds your talking are lan speeds - I with I could test with you, but I just don't have that kind of connection to figure out what could be the bottle neck.

It could be the number of connections you are doing and your router just can not handle it fully.. When your downloading take a look at the peer tab and how fast are you pulling from each seed, which one is your fastest, etc.

If I get a chance this weekend, maybe I will play with a local seed of some large files and see what I can get across my gig network to see what could be causing bottlenecks, etc.

edit: Double check to make sure you didn't put in a download limit in your client when you went through the setup guide. Also your not running any QoS or limiting on your router - quite possible misconfiguration of QoS could limit your download max. Also keep in mind that just because you show your connected to 67 seeds does not mean your actually downloading from all 67 at once, and then your speed is going to be limited to how fast they send, etc. etc.

How long are you taking to download in time?? Maybe these are just too small of torrents for you to actually get to your max speed. Torrents can take a few minutes to work out everything and get really going.. So if you only downloading say 1.5GB and your hitting 2.8+ out of the gate ans spiking to 8 or 10 for a few seconds, etc. maybe just not enough time to get to cruising speed?

Post up your speed graph for a full download of a good linux distro with lots of seeds, etc.

  • 0

I will post the traceroute test later as it's a side note. I just downloaded an ubuntu distro and have included the graph. unfortunately the download lasts a few seconds and isn't enough to show what I am claiming here.

This download shows that there are no accidental download limits setup and the client and disk and router can handle the speed and connections. the router is an e4200 linksys which promises to handle this sort of thing.

I enabled encryption but it's not forced so I am getting the msot number of peers. I am allowing legacy incoming connections. uTP bandwidth management is enabled and UDP tracker support is enabled. DHT network is disabled. UPnP and NAT-PMP port mapping are also enabled. I don't know what most of these mean but it sounds important.

here is the graph, if you want to tell me to shut up and stop whining after seeing this I will understand.

80968275.png

Here is the graph of a different download that also has many healthy seeds but lasts longer and you can see the speeds drop to around 4. If i had a bigger file I would show you how that works.

82918693.png

  • 0

dude from that first graph you doing like 11,000 KB or 11MBps there -- So I have to ask WTF, thats pretty freaking screaming as high as you could expect to see with your speed.

And the other one peaks up to 9.6MB.

You really really need to read a bit about how BT works, do you actually expect it to instantly jump to your full pipe and then sit there at MAX speed until done?? That first graph is like a picture perfect you could not in a million years ask for anything better in downloading from p2p. And it pretty much maxes out your pipe in what less than 60 seconds.

Your speed is going to come down to how fast and how many seeds what and can send to you.. Torrents are not going to work like a download from one source that has unlimited upload pipe. Its not going to work like you doing a file copy from server on you lan, or ftp server that has 100Mbps upload and your the only client.

You are clearly SCREAMing down and reaching your download speeds.. And your speeds are going to flux from swarm to swarm on how my seeds/quality of said seeds, number of peers, etc. etc.

I really don't see any reason to complain from what I am seeing.

This topic is now closed to further replies.
  • Posts

    • foobar2000 2.25.10 by Razvan Serea foobar2000 is an advanced freeware audio player for the Windows platform. It features the simplest, most minimalistic interface you'll ever see in this kind of program. Other features include full unicode support, ReplayGain support and native support for several popular audio formats. foobar2000 features: Supported audio formats: MP3, MP4, AAC, CD Audio, WMA, Vorbis, FLAC, WavPack, WAV, AIFF, Musepack, Speex, AU, SND... and more with additional components. Gapless playback. Full unicode support. Easily customizable user interface layout. Advanced tagging capabilities. Support for ripping Audio CDs as well as transcoding all supported audio formats using the Converter component. Full ReplayGain support. Customizable keyboard shortcuts. Open component architecture allowing third-party developers to extend functionality of the player foobar2000 2.25.10 changelog: Improved implementation of built-in UPnP Media Renderer, implemented gapless playback compatible with popular UPnP control apps. Enabled discovery of OpenHome UPnP devices as output devices. Enabled TLS v1.3 encryption for HTTPS connections. Fixed Ogg/Opus files with single chapter not showing correct track numbers. Fixed Direct2D visualizations getting stuck after GPU driver reinitialization. Updated 7-Zip library to 26.01. Updated UnRAR library to 7.2.6. Download: foobar2000 64-bit | 7.3 MB (Freeware) Download: foobar2000 32-bit | 6.4 MB Links: Home Page | foobar2000 for Mac | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Pick up Babbel Language Learning lifetime subscription at 47% off with code by Steven Parker Learn all 14 languages and access more than 10,000 hours of high-quality language education online. Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can pick up a lifetime subscription to Babbel Language Learning at 47% off. Note: Available to U.S. customers & NEW users only. Learn Spanish, French, Italian, German, and many more languages with Babbel, the #1 top-grossing language-learning app in the world. Developed by over 100 expert linguists, Babbel is helping millions of people speak a new language quickly and with confidence. After just one month, you will be able to speak confidently about practical topics, such as transportation, dining, shopping, directions, making friends and socializing and much more! Get lifetime access to learn all 14 languages Practice with 10-15 minute bite-sized lessons that fit conveniently into your schedule Cover a wide range of useful real-life topics, from travel to family, business, food & more Use speech recognition technology to keep your pronunciation on point Learn at a variety of skill levels, from beginner to advanced Get personalized review sessions to reinforce what you learn so it really sticks Study whenever & wherever you want and your progress will be synchronized across your devices Use offline mode to access courses, lessons & review items when not on Wi-Fi—just download them beforehand Languages Available: Spanish (Spain), German, Italian, French, Portuguese, Swedish, Turkish, Dutch, Polish, Indonesian, Norwegian, Danish, Russian, Spanish (Latin America) Good to know Length of access: lifetime Valid for New Users in the USA Only Redemption deadline: redeem your code within 30 days of purchase Please note redemption is required via Web Browser. Access to the mobile app will be available after redemption has been completed via web browser Max number of devices: Unlimited Access options: desktop & mobile Number of languages: 14 (all current languages) Updates included Babbel Language Learning: Lifetime Subscription (All Languages) normally costs $299, but you can pick it up for just $159 for a limited time - that represents a saving of $140. For a full description, specs, and license info, click the link below. Deal Price $159.00 with code LEARN (was $299) NOTE: For NEW users in the US only. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • AltSendme 0.4.2 is out.
    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!