• 0

bittorrent limited to 20% download speed


Question

Hey so I am playing on my new 100mbps connection and am downloading the largest, fastest file i could find that was legal. openSUSE dvd image. http://software.opensuse.org/121/en

Problem is, the download speed is only about 20-25% of my maximum potential. the file starts downloading at 10MB/S and then the speed drops to 1.2-2.8 MB/s... I don't get it. why would this happen? I have ran tests and know that my isp isn't limiting bittorrent activity. If i use the direct download link, i get 8MB/s...

is there a setting with utorrent? I am no expert with torrents and everything is set to whatever defaults the setup guide chooses for me.

i shoudl mention that there isn't much uploading going on and there is nothing else using the network.

16 answers to this question

Recommended Posts

  • 0

it's not a port forwarding issue, I looked into that. I am connected to 40+ peers just not downloading very fast.

My provider is not doing anything to my bandwidth. I used the extensive tests here http://broadband.mpi-sws.org/transparency/bttest-mlab.php?

I have also asked them and they said they don't do traffic shaping for any reason.

  • 0

Let me know what you find. I rarely see above 5 MB/sec - only get about 4 - 4.5 MB/sec in Steam & about 2.5 via http.

Just to be sure of your connection - go to MySpeed Visualware & see what you test @ It seems to be a little less flaky as opposed to speedtest.net

  • 0

Most ISPs now have traffic shaping (and they will never tell u they do that), and mostly that is the case with you :)

there is an encryption option (in your torrent application settings) so ur ISP wont detect that ur downloading torrent, give that a try.

Also try Half-Open Outbound TCP Connections, I know vista is only 10 connections (not sure about W7)

Edit: Half-open port limitation is removed with windows vista SP2, (so mostly it wont be there in W7).

  • 0

My speed visualware returns the same results as speedtest.net. I tried downloading the ubuntu torrent from their website but the file is too small to show results. It starts out strong at 10MB/s and drops to 5MB/s but not all the way down because it finishes within seconds.

This speed is of course the reason I don't think my isp is shaping my traffic. further, did you look at the link i posted? http://broadband.mpi...ttest-mlab.php? this thing basically tests your isp and tells you if your bandwidth is being limited in any way. I tried getting 5 different torrents to download at the same time to see if they will cap my connection but they all slowed down just enough so that my overall download speed was 3.1MB/s...... also forcing encryption didn't help much. I have the same speed fluctuation that leads to a slow overall speed in the end.

  • 0

Who is your service provider.

They could be traffic shaping.

This. Either that or it's the torrent your using.

Try downloading a reliable torrent (e.g, the ubuntu ISO), which you know has thousands of seeders available, and see what happenes.

If it is traffic shaping, then perhaps look into Usenet or perhaps a VPN.

  • 0

"If i use the direct download link, i get 8MB/s..."

You understand that your going to be limited by SENDING speed right??

Doesn't matter if there are 1000 seeds, your not going to connect to all of them. And there is OVERHEAD with torrents, And the seeds only send at a certain speed.

So you download ubuntu in seconds and your complaining? The DVD which what 1.5GB?

You can not take 100mbit and /8 and think your going to see 12.5MBps down -- you don't even see that on lan transfers. For starters you never actually get 100mbit, high 90's etc..

So what does your speedtest show exactly, and what are you uploading at during these torrent downloads? What is your upload speed? There is a ratio you want to set for best downloads, if your not sending fast enough peers will not send to you as fast as they can, etc.

With peers you have ###### for tat in upload/download with seeds you don't so you really want to be connecting to seeds for BEST download. The number of which matter and the total number of connections you have set matter, etc. etc.

So you have run through the setting wizard for your speeds and settings? What were those settings?

  • 0

1651081536.png

for the open suse download I am connected to 67 peers right now. my upload speed is set at 5600kB/s but that torrent doesn't really use more than 100kB/s upload stream. I am not expecting 12MB/s but I would like something around 9 at least. the thing that's making me think twice is the fact that the limitation is always around 2-3MB/s.

the suse torrent downloads at 2.8MB/s on average. I run 3 instances of it and you would think this would almost add up but that's not happening. I am getting about the same 2.8 average overall download speed.

oh and budman I know you are gonna comment on the 0ms ping. people brought it up in my other tread a week ago when I had just gotten the connection setup. I pinged my gateway like you said, here is the result. I don't know how to make cmd show milliseconds.

C:\Users\capr>ping 216.243.60.1

Pinging 216.243.60.1 with 32 bytes of data:

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Reply from 216.243.60.1: bytes=32 time<1ms TTL=254

Ping statistics for 216.243.60.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Users\capr>

  • 0

Well that is Freaking Screaming connection! Windows ping doesn't show less than 1.

Do a traceroute to the server your testing against, and we should see if your ping should be <1 the whole way. As I brought up in the other thread, I doubt the server you speedtesting with is connected to your gateway ;)

Ok lets do the math 95.37/8 does not = 12, sorry! Close but not 12, not take into account the overhead of moving a file your never going to see even 11.92MBps in p2p with that connection. There is just too much overhead with it to say you can actually fill your pipe. Your getting replies from other peers, How many actual connections do you have going - look at your router for this state info, if not on your machine running utorrent. Can your router actual handle the number of connections without getting into trouble? What router do you have?

As to your upload vs your download, if you mostly working with torrents that have lots of seeds you wont see much upload since everyone pulls from the seeds vs peers. With seeds there is no ###### for tat, they have the whole thing they don't you need you to send them part of it, etc.

2.8 is about 23Mbps -- maybe that is what your isp lowers too after specific amount of time? Do they do any sort of speedboosting crap like comcast? So on speedtest I see like 25Mbps, but sustained transfers it lowers to around 16Mbps

Are you using encryption on your settings? Maybe its a limitation of the software on your computer, writing to disk, etc. Someone would have to do some testing with local only seed since the speeds your talking are lan speeds - I with I could test with you, but I just don't have that kind of connection to figure out what could be the bottle neck.

It could be the number of connections you are doing and your router just can not handle it fully.. When your downloading take a look at the peer tab and how fast are you pulling from each seed, which one is your fastest, etc.

If I get a chance this weekend, maybe I will play with a local seed of some large files and see what I can get across my gig network to see what could be causing bottlenecks, etc.

edit: Double check to make sure you didn't put in a download limit in your client when you went through the setup guide. Also your not running any QoS or limiting on your router - quite possible misconfiguration of QoS could limit your download max. Also keep in mind that just because you show your connected to 67 seeds does not mean your actually downloading from all 67 at once, and then your speed is going to be limited to how fast they send, etc. etc.

How long are you taking to download in time?? Maybe these are just too small of torrents for you to actually get to your max speed. Torrents can take a few minutes to work out everything and get really going.. So if you only downloading say 1.5GB and your hitting 2.8+ out of the gate ans spiking to 8 or 10 for a few seconds, etc. maybe just not enough time to get to cruising speed?

Post up your speed graph for a full download of a good linux distro with lots of seeds, etc.

  • 0

I will post the traceroute test later as it's a side note. I just downloaded an ubuntu distro and have included the graph. unfortunately the download lasts a few seconds and isn't enough to show what I am claiming here.

This download shows that there are no accidental download limits setup and the client and disk and router can handle the speed and connections. the router is an e4200 linksys which promises to handle this sort of thing.

I enabled encryption but it's not forced so I am getting the msot number of peers. I am allowing legacy incoming connections. uTP bandwidth management is enabled and UDP tracker support is enabled. DHT network is disabled. UPnP and NAT-PMP port mapping are also enabled. I don't know what most of these mean but it sounds important.

here is the graph, if you want to tell me to shut up and stop whining after seeing this I will understand.

80968275.png

Here is the graph of a different download that also has many healthy seeds but lasts longer and you can see the speeds drop to around 4. If i had a bigger file I would show you how that works.

82918693.png

  • 0

dude from that first graph you doing like 11,000 KB or 11MBps there -- So I have to ask WTF, thats pretty freaking screaming as high as you could expect to see with your speed.

And the other one peaks up to 9.6MB.

You really really need to read a bit about how BT works, do you actually expect it to instantly jump to your full pipe and then sit there at MAX speed until done?? That first graph is like a picture perfect you could not in a million years ask for anything better in downloading from p2p. And it pretty much maxes out your pipe in what less than 60 seconds.

Your speed is going to come down to how fast and how many seeds what and can send to you.. Torrents are not going to work like a download from one source that has unlimited upload pipe. Its not going to work like you doing a file copy from server on you lan, or ftp server that has 100Mbps upload and your the only client.

You are clearly SCREAMing down and reaching your download speeds.. And your speeds are going to flux from swarm to swarm on how my seeds/quality of said seeds, number of peers, etc. etc.

I really don't see any reason to complain from what I am seeing.

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!