Recommended Posts

Okay so I was trying to change my IP Address by doing the following:

1. Open CMD

2. Type in 'ipconfig/release'

3. Go into Network Settings

4. Click on Properties for IPv4

5. Type in my own IP Address and DNS Server and Save

6. Go back into IPv4 Properties but check off the 'Obtain New IP Address' box and then Save

But after step 6, my IP Address is the same. Also, I have a Dynamic IP Address I think because when I open CMD and type in 'ipconfig/all', next to DHCP Enabled, it says Yes. I

If anything, please help guys! Thanks!

Edit: I'm Also running on Windows 7. Thanks!

Link to comment
https://www.neowin.net/forum/topic/1056134-how-do-i-change-my-ip-address/
Share on other sites

are you wanting to change your IP from your Internet provider or just the Local Network ?

Local Network, you would have to manually change it to something else, as the DHCP will just reassign you the lowest number, and if you have a small amount of systems, it will mostly be teh same.

Internet - turn off your Modem, wait for about 5-10 minutes, then turn it back on ( time is dependant on your providers DHCP renewal cycle, which isnt exact and sometimes days

which IP do you want to change? (reboot the modem but your IP has a life expectancy dictated by your ISP) ..

you can call them and ask to release a new IP

(if you want to change your LAN (internal IP then relase and go to router and give yourself a new one)

Maybe I'm a moron, but isn't your Dynamic IP address set by your Internet Service Provider? I don't think you can just type in your own.

there are 2 IP's, Local and Public, the Public is set by your provider, tne Local is Private and set by your router and is usually in the Popular 10.X.X.X, or 192.X.X.X range, or not so familiar 172.16.X.X

but yes being Dynamic is set by something else and rotates based on a lease time, but i still have yet to figure out when exactly that lease time goes into effect, as it doesnt follow the setting

are you wanting to change your IP from your Internet provider or just the Local Network ?

Local Network, you would have to manually change it to something else, as the DHCP will just reassign you the lowest number, and if you have a small amount of systems, it will mostly be teh same.

Internet - turn off your Modem, wait for about 5-10 minutes, then turn it back on ( time is dependant on your providers DHCP renewal cycle, which isnt exact and sometimes days

I would like to change my Local Network connection. Any steps or ideas of how to do it? Thanks. :)

Maybe I'm a moron, but isn't your Dynamic IP address set by your Internet Service Provider? I don't think you can just type in your own.

I have called them and they said that I have a dynamic IP Address.

Your Internet address is set by your ISP. You'd have to call them to ask them to change it.

Tried that. Doesn't work that way.

Your ISP administer IP address allocation and unless you have a static IP address you can't influence this other than rebooting your modem/router to see if they've supplied you with a new one.

If you're talking about your local IP address then turn off DHCP in your router to enable you to explicitly control IP address allocation.

Your ISP administer IP address allocation and unless you have a static IP address you can't influence this other than rebooting your modem/router to see if they've supplied you with a new one.

If you're talking about your local IP address then turn off DHCP in your router to enable you to explicitly control IP address allocation.

Yes, I am talking about my local ip address. Thanks :)

I would like to change my Local Network connection. Any steps or ideas of how to do it? Thanks. :)

the steps you were doing semed right up til you reenabled DHCP, and literally there is no reason to reassign your Local IP address.

but log into your router, disable DHCP of the LOCAL ONLY, NOT INTERNET CONNECTION DHCP

on your computer go to Network Setting properties for IPV4

set it to whatever in the range of the router ( in the image the rage for example would be 192.168.1.101-192.168.1.149, its the Router Starting+1, and Clients -1, so 101-149 )

save and your done

by reinabling DHCP you undid the setting of the IP

this is the setting your looking for

post-36462-0-26883300-1328457810.jpg

* Can i ask why you want to change your Local. there is no reason to at all

the steps you were doing semed right up til you reenabled DHCP, and literally there is no reason to reassign your Local IP address.

but log into your router, disable DHCP of the LOCAL ONLY, NOT INTERNET CONNECTION DHCP

on your computer go to Network Setting properties for IPV4

set it to whatever in the range of the router ( in the image the rage for example would be 192.168.1.101-192.168.1.149, its the Router Starting+1, and Clients -1, so 101-149 )

save and your done

by reinabling DHCP you undid the setting of the IP

this is the setting your looking for

post-36462-0-26883300-1328457810.jpg

* Can i ask why you want to change your Local. there is no reason to at all

Well actually, I have tried that but I don't think it worked. Hmm maybe I need someone to Team Viewer me or something? Also, I'm not sure if I want to change my Local Internet Connection but I want to change the connection so that when I go to http://www.whatismyip.com/ , it would display another IP Address other than the one that I already have.

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

Edit: Ok I just saw your latest post. "Whatismyipaddress" shows your INTERNET, public address, which is controlled by your ISP. If you have a dynamic IP, turn your modem off for an hour or so... really depends on how long your lease is for. Overnight might be best.

Well actually, I have tried that but I don't think it worked. Hmm maybe I need someone to Team Viewer me or something? Also, I'm not sure if I want to change my Local Internet Connection but I want to change the connection so that when I go to http://www.whatismyip.com/ , it would display another IP Address other than the one that I already have.

You tried that but redid the automatic when you reinabled DHCP, causing it to undo everything

And whatismyip shows your PUBLIC IP, and you cant manually vhange that other then turning off you modem for a long time

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

I will let you know how that goes as I've been doing that but I will use the numbers you have supplied me with. And this website has been telling me that my IP Address hasn't changed: http://www.whatismyip.com/

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

Edit: Ok I just saw your latest post. "Whatismyipaddress" shows your INTERNET, public address, which is controlled by your ISP. If you have a dynamic IP, turn your modem off for an hour or so... really depends on how long your lease is for. Overnight might be best.

You tried that but redid the automatic when you reinabled DHCP, causing it to undo everything

And whatismyip shows your PUBLIC IP, and you cant manually vhange that other then turning off you modem for a long time

Thank you guys! Here is my settings for my modem:

0CAuV.png

Does anyone know how long I have to wait for a new IP Address? Thanks,

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

In which case, it would probably just be easier to use a proxy!

In which case, it would probably just be easier to use a proxy!

No proxies are slow and not useful.

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

This is my exact router:

http://www.motorola.com/Consumers/US-EN/Consumer-Product-and-Services/Cable-Modems-and-Gateways/SBG6580-SURFboard-eXtreme-Wireless-Cable-Modem-Gateway-US-EN

If you are wanting to change your IP address set by your ISP, you will just have to wait for your ISP to change it. No other option short of using a proxy.

If you are talking about your local IP, the 192.168..... , then turn off DHCP (in your router) and set your IP address in your network connection:

Control Panel\Network and Internet\Network and Sharing Center > click "Local Area Connection" > Properties > Internet Protocol Version 4 (TC{/IPv4) > Properties

Does anyone know how long I have to wait for a new IP Address? Thanks,

Just install Hotspot Shield and call it a day?

Most ISPs will probably assign your account to a single IP address, and then your modem/router will distribute that ip address across the local network. You aren't going to get very far in trying to change your ip address. Spoofing is illegal, so the only alternative is to use a proxy service that will redirect all your data through a separate server that has a different ip address (and yes, whatismyip.com will show the new ip address).

This topic is now closed to further replies.
  • Posts

    • Vantrue knocks up to 38% off two of its newest Dash Cams for Prime Day by Steven Parker Vantrue reached out to us here at Neowin saying they have a couple of dashcams with deep discounts during the Prime Day Sale. First up we have the Vantrue N4 Pro S that received a mega 36% off its normal MSRP of $419.99 (buying links below). Here are a few of its highlights: Flagship 4K 3CH Dash Cam w/ Triple STARVIS 2: Vantrue's flagship N4 Pro s Dash Camera features 4K+2.5K+1080P /30FPS 3 channel recording powered by Triple STARVIS 2 sensors. Dash cams deliver 155°+160°+165° wide-angle coverage for complete blind-spot-free protection. Whether navigating city traffic, monitoring passengers, or capturing scenic views, this professional-grade car dash camera ensures smooth, detailed footage day and night. Night Vision 4.0 & License Plate Recognition Unleash superior clarity at night with 360 dash camera for cars. Powered by PlatePix tech, dashcam combines 3 STARVIS 2 sensors (enhanced low-light sensitivity) and triple HDR (balanced exposure) for 2x higher license plate accuracy in dimly lit nights or intense backlight. Experience unmatched performance on nocturnal drives, where the system captures clear, readable license plates of vehicles traveling at speeds up to 31mph. Flexible 360° Rear Camera & Front+Rear Recording Modes: The rear dash camera features a 2.5K STARVIS 2 sensor with 360° rotation, enabling seamless traffic or trunk monitoring. Switch to Front and Rear mode (4K+2.5K) to prioritize road recording—this dual-channel mode reduces heat by 30% and saves power compared to triple recording, ensuring 4k dash cam cooler operation and 24/7 reliability even in summer. Captures clear, readable license plates at speeds up to 31mph on lit streets at night. 24/7 Protection with Buffered Parking Mode: Gain round-the-clock security for your parked vehicle with reliable dash cam 3 channel system. Buffered motion and impact detection ensure events are captured from 10 seconds before they occur. All three cameras remain active in parking mode, providing comprehensive surveillance while efficient recording maximizes storage. To activate parking modes, a hardwire kit (sold separately) is required for permanent connection to your vehicle's fuse box. 5G WiFi, Precision GPS, Voice Control: This advanced car video camera dash cam maintains a stable connection to your phone. Its 5GHz WiFi ensures lightning-fast video transfer, making downloads a breeze. The built-in high-precision GPS tracks your route, speed, and location—providing vital data for any incidents. Control settings hands-free with simple voice commands like "Take a photo," keeping you focused on the road. Loop Recording & Super Capacitor & up to 1TB Support: Dash cams revolutionize convenience with loop recording featuring 1/2/3-minute segments. When memory is full, it automatically overwrites older footage. Engineered for reliability, its robust super capacitor withstands extreme temps(-4°F to 140°F), guaranteeing uninterrupted operation even in scorching sun. Expand storage with up to 1TB microSD support, enabling 37+ hours of continuous 4K triple-camera recording (front+inside+rear). VANTRUE Memory Card Recommendation: Note: Dash cam does not include an SD card. Avoid using low-quality memory cards to prevent the camera from malfunctioning. We recommend using VANTRUE industrial-grade microSD cards, which offer longer lifespan (over 3 years) compared to consumer-grade. VANTRUE memory cards are rigorously tested specifically for dash cam recording to ensure optimal performance. Available on Amazon in 64GB, 128GB, 256GB, and 512GB capacities to suit your storage needs. So marketing jargon aside, what do you actually get? What's in the box? N4 Pro S Dash Cam, Rear Camera, 20ft rear camera cable Charging Cable Installation Tool Car Mount Quick Guide Vantrue also claims it is easy to install and comes with an 18-Month Warranty, 24/7 email support, and a 100% satisfaction guarantee. The Dash cam is said to also receive regular firmware updates for continuous improvements. With the 20ft rear camera cable, it is versatile enough to fit most vehicles, including cars, SUVs, minivans, trucks, and buses. Vantrue N4 Pro S for $269.99 (was $379.99) 36% off its MSRP of $419.99 No code required. Discount expires on June 26. Vantrue N4S (2026) Next up, there's an even bigger discount on the new (2026 edition) N4S Dash Cam. 2026 New 3-Channel Dash Cam & 360°Coverage Equipped with triple STARVIS 2-powered sensors, the Vantrue N4S dashcam records in super HD clarity: 2.7K front + 1440P interior + 1440P rear.Its 158° front, 165° cabin, and 160°rear wide-angle lenses eliminate blind spots, while HDR and PlatePix technology deliver sharp details and license plates day or night. This dash cam for cars is perfect for rideshare drivers and daily commuters. Night Vision 4.0 & High Temperature Proof Powered by STARVIS 2 Tech, the N4S dashcam for cars enhances light sensitivity and dynamic range in extreme low light. Triple HDR balances harsh contrasts—like headlights against dark roads—while PlatePix sharpens license plates by 2X, capturing crisp, identifiable footage on dark streets, in tunnels, or garages. This New N4S dashcam's supercapacitor design withstands extreme temperatures(-4℉ to 140℉), ensuring stable operation—safer and greener. Easy to Install & 360°versatile Rear Camera Set up effortlessly with our magnetic GPS mount, static cling film, and cable clips. Everything is tool‑free for a clean, wire‑hidden installation, and the mount stays stable on any drive. The rear camera rotates 360°, letting you monitor rear traffic or pivot it inward to keep an eye on cargo, luggage, or pets inside the vehicle. Versatile coverage whenever you need it. 24/7 Smart Parking Mode for Peace of Mind With 4 proprietary parking modes, the N4S 3-channel dashcam for cars lets you customize your protection. Motion detection triggers 10 seconds pre-event recording to capture full event. Collision detection auto-locks footage on impact/collision. Low bitrate/frame rate modes extend recording by reducing file size. Whatever the hour, your vehicle is always protected. 5GHz Wi-Fi & Support up to 1TB SD Card Access and download footage instantly with high‑speed 5GHz Wi-Fi. No need to remove the memory card or wait for transfers—critical clips are ready to view or share in seconds. This dash cam front and rear supports up to 1TB microSD cards (sold separately), giving you ample space for long trips or continuous loop recording. OTA firmware updates ensure your dashcam stays current with the latest features and improvements. So, again, aside from the marketing fluff mentioned above what do you actually get? What's in the box? Vantrue N4S Front and Inside Dash Cam x 1 Rear Camera x 1, Rear Camera Cable (20ft) x 1 Transparency Program card (with digital setup guide) x 1 Car Charger(11.5ft) x 1 USB Data Cable(3.3ft) x 1 GPS Adhesive Mount x 1 Crowbar x 1 Quick User Guide x 1 Electrostatic Stickers x 2 Spare Bracket Base Cable Clips The 2026 Edition of the N4S lets you track your journey with quad-mode GPS + BeiDou positioning. Experience supposedly faster satellite acquisition and reliable logging of your speed, location, and time in any environment. For rideshare or road trips, you can also trust the N4S dash cam front rear and inside cameras as your reliable co-driver. Like the Vantrue N4 Pro S, it is also backed by 24/7 support and extended warranty for complete peace of mind. Vantrue N4S (2026) for $174.99 (was $249.99) 38% off its MSRP of $279.99 No code required. Discount expires on June 26. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The concern of this article is not getting "hacked". No one is taking over my Google account and anyone that was is far away from self-hosting their passwords. It was about your big tech account of choice deciding to reduce features or getting out of the password manager business altogether. Bitwarden (or say Proton) is professional security company offering opensource solutions. They are going no where and one can easily download or export their passwords to another password manager service regardless. They again also offer self-hosted option. I doubt many people were sold on this solution based on the write up. The author had a number of warnings and caveats themselves. A local, self-managed solution is not for 99% of users.
    • I've owned nothing but ATi/AMD GPUs since 2002, after my last nVidia GPU in 2001 (3dfx before that), IIRC, and in all of that time I recall getting this error maybe once, certainly no more than twice. Despite all the scuttlebutt as to how poor AMD drivers are supposed to be that has certainly not been my experience at all... Usually it has been a configuration problem of some kind. Then again, since we're dealing with OS versions that are EOL, it could easily be an OS version discrepancy. It's still weird to think that Win11 has been officially out for more than five years!
    • AI will never be the jobs panacea some companies fantasize about today. Oracle is likely using it as an excuse, which we will see a lot of companies doing, I'm certain. They love their "plausible" excuses for their downturns. A couple of weeks ago my wife asked me to call Krogers about some discrepancy in a online grocery order, and it will be the last time either of us does that. I'll just do emails with humans from now on... The AI experience was horrible--the obviously recorded voice started asking a bunch of questions about our orders six months prior(!) and saying, "Is this in reference to your order on January 6, for $****?" You say "No!" and immediately the next question is "Is this in reference to your order on January 29th, for $****?" again, I answered "No!"--and it was incredible--on and on it went like that for fully 20 minutes until we finally got to the present, and only then was I put through to a human with authentic intelligence... I wondered why on Earth the idiot AI didn't start with the most recent orders and work back from there, as it was something anyone with a functioning brain would have done. And why didn't the AI have enough sense to ask me what the problem was in the first place? It didn't take too much deduction to understand that the goal of this "AI" was to cause the person on the phone to hang up in disgust, with no resolution of the problem. That begs another question: why pay for a tool-free problem line if the goal is to avoid solving your customer's problems?... Fortunately, Krogers does have real humans capable of reading an email and understanding it, and if she sees another situation in the future that's route she or I will take. The online grocery delivery service from Krogers has been great, over all, but their AI truly sucks.
    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      480
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      103
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!