Recommended Posts

Okay so I was trying to change my IP Address by doing the following:

1. Open CMD

2. Type in 'ipconfig/release'

3. Go into Network Settings

4. Click on Properties for IPv4

5. Type in my own IP Address and DNS Server and Save

6. Go back into IPv4 Properties but check off the 'Obtain New IP Address' box and then Save

But after step 6, my IP Address is the same. Also, I have a Dynamic IP Address I think because when I open CMD and type in 'ipconfig/all', next to DHCP Enabled, it says Yes. I

If anything, please help guys! Thanks!

Edit: I'm Also running on Windows 7. Thanks!

Link to comment
https://www.neowin.net/forum/topic/1056134-how-do-i-change-my-ip-address/
Share on other sites

are you wanting to change your IP from your Internet provider or just the Local Network ?

Local Network, you would have to manually change it to something else, as the DHCP will just reassign you the lowest number, and if you have a small amount of systems, it will mostly be teh same.

Internet - turn off your Modem, wait for about 5-10 minutes, then turn it back on ( time is dependant on your providers DHCP renewal cycle, which isnt exact and sometimes days

which IP do you want to change? (reboot the modem but your IP has a life expectancy dictated by your ISP) ..

you can call them and ask to release a new IP

(if you want to change your LAN (internal IP then relase and go to router and give yourself a new one)

Maybe I'm a moron, but isn't your Dynamic IP address set by your Internet Service Provider? I don't think you can just type in your own.

there are 2 IP's, Local and Public, the Public is set by your provider, tne Local is Private and set by your router and is usually in the Popular 10.X.X.X, or 192.X.X.X range, or not so familiar 172.16.X.X

but yes being Dynamic is set by something else and rotates based on a lease time, but i still have yet to figure out when exactly that lease time goes into effect, as it doesnt follow the setting

are you wanting to change your IP from your Internet provider or just the Local Network ?

Local Network, you would have to manually change it to something else, as the DHCP will just reassign you the lowest number, and if you have a small amount of systems, it will mostly be teh same.

Internet - turn off your Modem, wait for about 5-10 minutes, then turn it back on ( time is dependant on your providers DHCP renewal cycle, which isnt exact and sometimes days

I would like to change my Local Network connection. Any steps or ideas of how to do it? Thanks. :)

Maybe I'm a moron, but isn't your Dynamic IP address set by your Internet Service Provider? I don't think you can just type in your own.

I have called them and they said that I have a dynamic IP Address.

Your Internet address is set by your ISP. You'd have to call them to ask them to change it.

Tried that. Doesn't work that way.

Your ISP administer IP address allocation and unless you have a static IP address you can't influence this other than rebooting your modem/router to see if they've supplied you with a new one.

If you're talking about your local IP address then turn off DHCP in your router to enable you to explicitly control IP address allocation.

Your ISP administer IP address allocation and unless you have a static IP address you can't influence this other than rebooting your modem/router to see if they've supplied you with a new one.

If you're talking about your local IP address then turn off DHCP in your router to enable you to explicitly control IP address allocation.

Yes, I am talking about my local ip address. Thanks :)

I would like to change my Local Network connection. Any steps or ideas of how to do it? Thanks. :)

the steps you were doing semed right up til you reenabled DHCP, and literally there is no reason to reassign your Local IP address.

but log into your router, disable DHCP of the LOCAL ONLY, NOT INTERNET CONNECTION DHCP

on your computer go to Network Setting properties for IPV4

set it to whatever in the range of the router ( in the image the rage for example would be 192.168.1.101-192.168.1.149, its the Router Starting+1, and Clients -1, so 101-149 )

save and your done

by reinabling DHCP you undid the setting of the IP

this is the setting your looking for

post-36462-0-26883300-1328457810.jpg

* Can i ask why you want to change your Local. there is no reason to at all

the steps you were doing semed right up til you reenabled DHCP, and literally there is no reason to reassign your Local IP address.

but log into your router, disable DHCP of the LOCAL ONLY, NOT INTERNET CONNECTION DHCP

on your computer go to Network Setting properties for IPV4

set it to whatever in the range of the router ( in the image the rage for example would be 192.168.1.101-192.168.1.149, its the Router Starting+1, and Clients -1, so 101-149 )

save and your done

by reinabling DHCP you undid the setting of the IP

this is the setting your looking for

post-36462-0-26883300-1328457810.jpg

* Can i ask why you want to change your Local. there is no reason to at all

Well actually, I have tried that but I don't think it worked. Hmm maybe I need someone to Team Viewer me or something? Also, I'm not sure if I want to change my Local Internet Connection but I want to change the connection so that when I go to http://www.whatismyip.com/ , it would display another IP Address other than the one that I already have.

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

Edit: Ok I just saw your latest post. "Whatismyipaddress" shows your INTERNET, public address, which is controlled by your ISP. If you have a dynamic IP, turn your modem off for an hour or so... really depends on how long your lease is for. Overnight might be best.

Well actually, I have tried that but I don't think it worked. Hmm maybe I need someone to Team Viewer me or something? Also, I'm not sure if I want to change my Local Internet Connection but I want to change the connection so that when I go to http://www.whatismyip.com/ , it would display another IP Address other than the one that I already have.

You tried that but redid the automatic when you reinabled DHCP, causing it to undo everything

And whatismyip shows your PUBLIC IP, and you cant manually vhange that other then turning off you modem for a long time

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

I will let you know how that goes as I've been doing that but I will use the numbers you have supplied me with. And this website has been telling me that my IP Address hasn't changed: http://www.whatismyip.com/

You don't have a antivirus that prevents network connection changes do you?

Start > Control Panel > Network and Sharing > Change Adapter Settings

Unplug your network connection (if wired) or disable wireless (switch)

Right click connection > Properties

IPv4 > Properties

Use the following IP address:

Set the IP address you want: eg 192.168.1.56

Subnet 255.255.255.0

Default Gateway: Address of your router (eg, 192.168.1.1)

Press ok and close everything else with "ok"s, not X's

Now since it hasn't been working so well for you, reboot, log in, check that the settings are still present, and then plug in your network connection.

By the way, what has been telling you your IP address hasn't changed?

Edit: Ok I just saw your latest post. "Whatismyipaddress" shows your INTERNET, public address, which is controlled by your ISP. If you have a dynamic IP, turn your modem off for an hour or so... really depends on how long your lease is for. Overnight might be best.

You tried that but redid the automatic when you reinabled DHCP, causing it to undo everything

And whatismyip shows your PUBLIC IP, and you cant manually vhange that other then turning off you modem for a long time

Thank you guys! Here is my settings for my modem:

0CAuV.png

Does anyone know how long I have to wait for a new IP Address? Thanks,

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

In which case, it would probably just be easier to use a proxy!

In which case, it would probably just be easier to use a proxy!

No proxies are slow and not useful.

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

This is my exact router:

http://www.motorola.com/Consumers/US-EN/Consumer-Product-and-Services/Cable-Modems-and-Gateways/SBG6580-SURFboard-eXtreme-Wireless-Cable-Modem-Gateway-US-EN

If you are wanting to change your IP address set by your ISP, you will just have to wait for your ISP to change it. No other option short of using a proxy.

If you are talking about your local IP, the 192.168..... , then turn off DHCP (in your router) and set your IP address in your network connection:

Control Panel\Network and Internet\Network and Sharing Center > click "Local Area Connection" > Properties > Internet Protocol Version 4 (TC{/IPv4) > Properties

Does anyone know how long I have to wait for a new IP Address? Thanks,

Just install Hotspot Shield and call it a day?

Most ISPs will probably assign your account to a single IP address, and then your modem/router will distribute that ip address across the local network. You aren't going to get very far in trying to change your ip address. Spoofing is illegal, so the only alternative is to use a proxy service that will redirect all your data through a separate server that has a different ip address (and yes, whatismyip.com will show the new ip address).

This topic is now closed to further replies.
  • Posts

    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!