Recommended Posts

Why are you so gungho on changing your public IP, any and all pron warez and torrents the ISP keeps a record of the IP you have had in the past as well as times you had them,,,

There is no reason at all that i can think of to try and force a public IP change

And as myself and others have said, you have no other options to change public IP then to unplug router and wait it out, and thats a big IF.

If your trying to circumvent a Public IP ban, there was a reason you were banned

you should be able to unlug your cable modem's power for around 30-60 minutes (but sometimes much longer) and by the time you reboot you might get handed a new ip address.

also what budman says about changing your wan side mac address would be the fastest way to get a new ip.

  • 3 weeks later...

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

Which is the best, secure (supports SSL and HTTPS) and annoynomous proxy software avalible. I want to buy one.. I need to switch ip for differnet geo domains to check my search results on different domains/geo locations? Which would be the best bet. Tried some chrome extention (hidemyass), it sucks though..Also how much would i compromise on my internet speed and security. I can pay for a better one but i need the top one in the list? Any suggestions

There are different networks in play. You have control of the network between your PC and your Router (Internal network), Your ISP has control the network between your Router and their Router (External Network/Internet), Your ISP will connect to other networks they don't have control over.

What is displayed on whatismyip.com is controlled by Your ISP.

Some ISPs offer Dynamic IP addresses (They can change your IP address whenever they like), other offer static IP addresses (Your IP address never changes unless you ask them to change it).

Do not change the MAC address on a Cable modem, Most cable companies look at the MAC address to allow you onto their network.

If you wish to change the IP address that your ISP assigns you, there are a few things you can try:

1. Release/Renew the IP address on the modem, or reboot it. It is quite likely that the ISP will simply issue the same IP address again in this case.

2. Release the IP address or switch off the modem completely for a few days. Somebody else's modem in the area might be due for a new IP address to be handed out and hopefully will be issued with your old one instead of getting the same one again. When you plug back in/renew the IP address you could then get their one (or someone else has taken their old one you get someone else's, and so on).

3. Asking your ISP to give you a Static IP address if you are currently on Dynamic. There is usually and extra charge for this and not all ISPs offer it. Check if they will issue you with a new IP address if you do this.

4. If you already have a Static IP, request that the ISP gives you a new static IP. My ISP allows me to change my Static IP (included for free) using their online toolbox up to 50 times for free.

5. If you still can't change the IP address, get a new ISP. That will definitely give you a new IP address.

If you received a copyright infringement notice showing your IP address, this won't help you. Most ISPs keep a date/time log of when you had a particular IP address so they can still track you even if you change IP addresses. Also if you have been banned from something, sometimes the whole IP block is banned (so even if you change, if your new IP address is similar to the old it will be blocked also).

"I need to switch ip for differnet geo domains to check my search results on different domains/geo locations?"

If this is what your looking to do, it is possible that a proxy would work. You would need one that allowed you to pick your geo location of the proxy.

Your better option in this case would be most likely to use a VPN that allows you to pick the country end point of the vpn vs a proxy.

But to be honest I don't think you need to go to such drastic measures.

http://support.googl...n&answer=179386

Specify your preferred location

  • If you'd like to change your location, click Change Location and enter a street address, zip code, city and state, or country in the box that appears. Click Set to save your location setting.
  • You can only specify a location within the country of your current Google domain. For instance, it's not possible to set a U.S. address on www.google.es, the Google domain for Spain. If you'd like to see results for a region outside of your Google domain, please specify the location in the search query (like [ bicycle repair paris ]) or visit a different Google local domain instead.
  • If you don?t already have a location set, enter a location in the box next to "Search near," then click Set.

example

post-14624-0-69278800-1330361229_thumb.j

post-14624-0-13220200-1330361519_thumb.j

I think you might want to look up the term again ;) What part of this thread is trolling?

Who is frustrated or angered in this post? Or for that matter how would the subject not belong in this section, etc.

When I see "Epic trolling" I had to read from page one to find for the trolling. Sorry to tell you I didn't find one.

To the OP: The solution had already been given by BudMan. To get a new External IP, just clone your MAC address on your Router. Someone suggested not to do that, and he has a good point too, but this seems to be the only solution. I play Diablo 2 and for some reason they block my IP from logging in. I can't wait days to get my IP change while waiting for the ISP DNS to be released on schedule so the solution is just change my MAC address on my router and turn off the router and modem and wait for 90 seconds. Start up the system and you will get a new IP.

"I need to switch ip for differnet geo domains to check my search results on different domains/geo locations?"

If this is what your looking to do, it is possible that a proxy would work. You would need one that allowed you to pick your geo location of the proxy.

Your better option in this case would be most likely to use a VPN that allows you to pick the country end point of the vpn vs a proxy.

But to be honest I don't think you need to go to such drastic measures.

http://support.googl...n&answer=179386

Specify your preferred location

  • If you'd like to change your location, click Change Location and enter a street address, zip code, city and state, or country in the box that appears. Click Set to save your location setting.
  • You can only specify a location within the country of your current Google domain. For instance, it's not possible to set a U.S. address on www.google.es, the Google domain for Spain. If you'd like to see results for a region outside of your Google domain, please specify the location in the search query (like [ bicycle repair paris ]) or visit a different Google local domain instead.
  • If you don?t already have a location set, enter a location in the box next to "Search near," then click Set.

example

post-14624-0-69278800-1330361229_thumb.j

post-14624-0-13220200-1330361519_thumb.j

ohh wow this sounds good, would surely try this one.. but just in case i decide to pick one which should i look for..? actually my SEO tools will pick up and detect ip address and i cant tweek like this :(...

It really depends on your ISP at this point. I'm supposed to have dynamic addresses on my modem, but I was using the same IP address for four years until I switched to a router.

Mine is instant. The moment my modem/router loses connection, it gains a new IP address.

I was too lazy to read all of this thread but I will give you what I know and you can apply it if it works for you.

If the ip address from your provider is dynamic then usually it will rarely change even if it is dynamic. Once it has expired it will be renewed and you will get the same ip address. They use your mac address to set your dynamic ip address so if you do not want to wait a long period of time and force it to change then this is the steps to take.

  1. Change your mac address. I do not know how to chagne the PC mac address but most routers allow you to set a mac address. By default they use their real mac address.
  2. Restart your router. (Either by the router page or by unplugging the router)
  3. Restart your modem. (I just pull the power and plug it back in)
  4. Within about a minute you will have a new ip address. The time depends on the hardware but should be within a minute. After your modem restarts you can always go to your router page and hit the buttons to release and then update the ip address. It is not necessary but can save seconds if you are impatient.

At least this works for cox.

No. I have no problems teamviewing my desktop via my iphone or laptop or any device with teamviewer on it. Works fine.

Bigpond (the isp I am with) refreshes my ipaddress everytime I connect but my DHCP reversation addresses are always the same.

This topic is now closed to further replies.
  • Posts

    • GitHub removes manual model selection from Copilot free and student plans by Karthik Mudaliar GitHub is removing the ability to manually select an AI model from its Copilot Free and Student plans, making its automatic routing system the default and only way to choose a model. This means users on these tiers will no longer be able to deliberately select a particular OpenAI, Anthropic, Google, or Microsoft model for a task. In its announcement, GitHub said Copilot Auto will dynamically choose what it considers the best model for each request. Free and Student accounts will retain access to models from multiple families, although the available selection will continue to depend on the restrictions attached to each plan. GitHub did not identify a fixed pool of models that Auto will always use, and its documentation warns that model availability can change over time. GitHub describes Auto as more than a random fallback system. On supported surfaces, its task-optimization technology evaluates the complexity of a request alongside real-time information about model health and availability. Straightforward prompts can be routed to faster and less expensive models, while more demanding coding tasks may be sent to higher-cost reasoning models. The company says this approach should reduce rate limiting, latency, and failed requests. Auto generally selects one model along natural prompt-caching boundaries rather than repeatedly switching models during a session, as GitHub found that mid-session changes increased costs without producing sufficient improvements in output quality. Users can still check which model generated a response. In Copilot Chat, the information appears when hovering over an answer, while Copilot CLI and the Copilot cloud agent display the selected model alongside their output. Auto is available in Copilot Chat, Copilot CLI, and the cloud agent, with the exact implementation and release status varying between supported development environments. The latest restriction follows several months of adjustments to Copilot’s individual plans. GitHub temporarily halted new Pro, Pro+, and Student subscriptions in April as it sought to manage demand and service reliability. It later introduced token-based billing and began gradually reopening individual-plan registrations on June 17. Alongside the picker change, GitHub is retiring the “Preview” label from Microsoft-developed models. It argues that the label is no longer necessary because Auto handles model routing and models are continuously updated behind the scenes.
    • Look up 'inflation' kid. Ask an AI for the numbers between both games.
    • Google reportedly set to lose two key Gemini and DeepMind researchers to Anthropic by Karthik Mudaliar Google is reportedly preparing to lose two more prominent artificial intelligence researchers, with Gemini contributors Jonas Adler and Alexander Pritzel planning to join rival AI developer Anthropic. According to a report from Bloomberg, both researchers are viewed internally as important contributors to Google’s flagship Gemini model family. Adler worked on Google’s AI coding efforts, while Pritzel was involved in the process used to train AI systems. Neither company has publicly confirmed the moves. The report also does not say when the researchers will formally leave Google or what positions they will hold at Anthropic. Training a large AI model requires decisions covering its architecture, data preparation, distributed computing infrastructure, and post-training methods that shape how the finished system behaves. Researchers with experience operating at the scale of Gemini are consequently difficult to replace quickly. Both Adler and Pritzel have previously contributed to Google DeepMind’s scientific research as well. They are listed among the authors of the company’s work on expanding AlphaFold protein-structure predictions across entire proteomes, alongside AlphaFold researchers including John Jumper. The reported departures arrive shortly after another important change within Google’s Gemini organization. Gemini co-lead Noam Shazeer is leaving Google for OpenAI, after returning to the search company in 2024 through its deal with Character.AI. Shazeer is particularly well known as one of the authors of the Transformer paper, whose architecture became the foundation for most modern large language models. Anthropic, meanwhile, has been recruiting recognizable figures from other leading laboratories. OpenAI co-founder and former Tesla AI director Andrej Karpathy joined Anthropic’s pre-training team in May. His move, followed by the reported recruitment of several Google researchers, suggests Anthropic is strengthening the research teams responsible for the core capabilities of future Claude models rather than concentrating solely on product and enterprise sales. The competition is complicated by the companies’ extensive commercial relationships. Anthropic competes directly with Google’s Gemini models, but it also relies on Google as an infrastructure partner. In April, Anthropic announced an expanded agreement with Google and Broadcom covering multiple gigawatts of next-generation Tensor Processing Unit capacity. TPUs are Google-designed accelerators used to train and run large AI models. via Bloomberg
    • This article makes my head hurt. Lots of confusing words
    • Google adds built-in computer control to Gemini 3.5 flash by Karthik Mudaliar Google has added Computer Use as a built-in tool in Gemini 3.5 Flash, giving developers a single model that can reason about a task and operate graphical interfaces across browsers, mobile devices, and desktop environments. The feature is available through the Gemini API and Google’s Gemini Enterprise Agent Platform, although it remains a preview feature for now. Computer Use enables an AI agent to examine screenshots and return actions such as mouse clicks, scrolling, and keyboard input. A developer’s application must execute those actions, capture the resulting screen, and send it back to Gemini, creating a continuous loop until the task is completed. Google says the integration can be used for activities including repetitive form filling, application testing, research across multiple websites, and longer enterprise workflows. Gemini 3.5 Flash can work with browser, mobile, and desktop environments, whereas Google’s earlier standalone Computer Use model was primarily positioned around browser interaction. The main change is consolidation. Computer control was previously offered through the separate Gemini 2.5 Computer Use preview model. As Neowin reported when that model was introduced, it was designed to interpret a visual interface and generate actions without requiring a website-specific API. Google later brought Computer Use to preview versions of Gemini 3 Pro and Gemini 3 Flash in January 2026. The latest release now incorporates the tool into the stable Gemini 3.5 Flash model rather than requiring developers to select a specialized model solely for interface automation. Gemini 3.5 Flash itself was announced in May as Google’s latest fast model for coding and multi-step agent workflows. It supports a one-million-token input context window and up to 65,000 output tokens, along with adjustable thinking levels that let developers trade additional reasoning for lower latency and cost. Google also added that Gemini 3.5 Flash received targeted adversarial training for computer-use scenarios. The company is also offering safeguards that can require user confirmation before sensitive or irreversible actions and automatically stop a workflow when suspected prompt injection is detected. Its developer documentation describes configurable protections for areas such as financial transactions and changes to sensitive records. Google isn't the first to bring Computer Use to its platform. Anthropic has made computer control available through Claude, while OpenAI has continued improving computer-use performance in its recent models. Microsoft has also applied the concept to business workflows, including a Computer Use capability for the Researcher agent in Microsoft 365 Copilot.
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!