Recommended Posts

Why are you so gungho on changing your public IP, any and all pron warez and torrents the ISP keeps a record of the IP you have had in the past as well as times you had them,,,

There is no reason at all that i can think of to try and force a public IP change

And as myself and others have said, you have no other options to change public IP then to unplug router and wait it out, and thats a big IF.

If your trying to circumvent a Public IP ban, there was a reason you were banned

you should be able to unlug your cable modem's power for around 30-60 minutes (but sometimes much longer) and by the time you reboot you might get handed a new ip address.

also what budman says about changing your wan side mac address would be the fastest way to get a new ip.

  • 3 weeks later...

You might have to wait forever.. All depends on your ISP,

The can try and force the change by changing the mac on the wan interface of your router - does your router support mac cloning? What is the specific model of your router your showing there?

Then again what do you think your going to accomplish changing your public IP?? I would guess your trying to circumvent some sort of block? This is really the only reason to do such a thing.

Which is the best, secure (supports SSL and HTTPS) and annoynomous proxy software avalible. I want to buy one.. I need to switch ip for differnet geo domains to check my search results on different domains/geo locations? Which would be the best bet. Tried some chrome extention (hidemyass), it sucks though..Also how much would i compromise on my internet speed and security. I can pay for a better one but i need the top one in the list? Any suggestions

There are different networks in play. You have control of the network between your PC and your Router (Internal network), Your ISP has control the network between your Router and their Router (External Network/Internet), Your ISP will connect to other networks they don't have control over.

What is displayed on whatismyip.com is controlled by Your ISP.

Some ISPs offer Dynamic IP addresses (They can change your IP address whenever they like), other offer static IP addresses (Your IP address never changes unless you ask them to change it).

Do not change the MAC address on a Cable modem, Most cable companies look at the MAC address to allow you onto their network.

If you wish to change the IP address that your ISP assigns you, there are a few things you can try:

1. Release/Renew the IP address on the modem, or reboot it. It is quite likely that the ISP will simply issue the same IP address again in this case.

2. Release the IP address or switch off the modem completely for a few days. Somebody else's modem in the area might be due for a new IP address to be handed out and hopefully will be issued with your old one instead of getting the same one again. When you plug back in/renew the IP address you could then get their one (or someone else has taken their old one you get someone else's, and so on).

3. Asking your ISP to give you a Static IP address if you are currently on Dynamic. There is usually and extra charge for this and not all ISPs offer it. Check if they will issue you with a new IP address if you do this.

4. If you already have a Static IP, request that the ISP gives you a new static IP. My ISP allows me to change my Static IP (included for free) using their online toolbox up to 50 times for free.

5. If you still can't change the IP address, get a new ISP. That will definitely give you a new IP address.

If you received a copyright infringement notice showing your IP address, this won't help you. Most ISPs keep a date/time log of when you had a particular IP address so they can still track you even if you change IP addresses. Also if you have been banned from something, sometimes the whole IP block is banned (so even if you change, if your new IP address is similar to the old it will be blocked also).

"I need to switch ip for differnet geo domains to check my search results on different domains/geo locations?"

If this is what your looking to do, it is possible that a proxy would work. You would need one that allowed you to pick your geo location of the proxy.

Your better option in this case would be most likely to use a VPN that allows you to pick the country end point of the vpn vs a proxy.

But to be honest I don't think you need to go to such drastic measures.

http://support.googl...n&answer=179386

Specify your preferred location

  • If you'd like to change your location, click Change Location and enter a street address, zip code, city and state, or country in the box that appears. Click Set to save your location setting.
  • You can only specify a location within the country of your current Google domain. For instance, it's not possible to set a U.S. address on www.google.es, the Google domain for Spain. If you'd like to see results for a region outside of your Google domain, please specify the location in the search query (like [ bicycle repair paris ]) or visit a different Google local domain instead.
  • If you don?t already have a location set, enter a location in the box next to "Search near," then click Set.

example

post-14624-0-69278800-1330361229_thumb.j

post-14624-0-13220200-1330361519_thumb.j

I think you might want to look up the term again ;) What part of this thread is trolling?

Who is frustrated or angered in this post? Or for that matter how would the subject not belong in this section, etc.

When I see "Epic trolling" I had to read from page one to find for the trolling. Sorry to tell you I didn't find one.

To the OP: The solution had already been given by BudMan. To get a new External IP, just clone your MAC address on your Router. Someone suggested not to do that, and he has a good point too, but this seems to be the only solution. I play Diablo 2 and for some reason they block my IP from logging in. I can't wait days to get my IP change while waiting for the ISP DNS to be released on schedule so the solution is just change my MAC address on my router and turn off the router and modem and wait for 90 seconds. Start up the system and you will get a new IP.

"I need to switch ip for differnet geo domains to check my search results on different domains/geo locations?"

If this is what your looking to do, it is possible that a proxy would work. You would need one that allowed you to pick your geo location of the proxy.

Your better option in this case would be most likely to use a VPN that allows you to pick the country end point of the vpn vs a proxy.

But to be honest I don't think you need to go to such drastic measures.

http://support.googl...n&answer=179386

Specify your preferred location

  • If you'd like to change your location, click Change Location and enter a street address, zip code, city and state, or country in the box that appears. Click Set to save your location setting.
  • You can only specify a location within the country of your current Google domain. For instance, it's not possible to set a U.S. address on www.google.es, the Google domain for Spain. If you'd like to see results for a region outside of your Google domain, please specify the location in the search query (like [ bicycle repair paris ]) or visit a different Google local domain instead.
  • If you don?t already have a location set, enter a location in the box next to "Search near," then click Set.

example

post-14624-0-69278800-1330361229_thumb.j

post-14624-0-13220200-1330361519_thumb.j

ohh wow this sounds good, would surely try this one.. but just in case i decide to pick one which should i look for..? actually my SEO tools will pick up and detect ip address and i cant tweek like this :(...

It really depends on your ISP at this point. I'm supposed to have dynamic addresses on my modem, but I was using the same IP address for four years until I switched to a router.

Mine is instant. The moment my modem/router loses connection, it gains a new IP address.

I was too lazy to read all of this thread but I will give you what I know and you can apply it if it works for you.

If the ip address from your provider is dynamic then usually it will rarely change even if it is dynamic. Once it has expired it will be renewed and you will get the same ip address. They use your mac address to set your dynamic ip address so if you do not want to wait a long period of time and force it to change then this is the steps to take.

  1. Change your mac address. I do not know how to chagne the PC mac address but most routers allow you to set a mac address. By default they use their real mac address.
  2. Restart your router. (Either by the router page or by unplugging the router)
  3. Restart your modem. (I just pull the power and plug it back in)
  4. Within about a minute you will have a new ip address. The time depends on the hardware but should be within a minute. After your modem restarts you can always go to your router page and hit the buttons to release and then update the ip address. It is not necessary but can save seconds if you are impatient.

At least this works for cox.

No. I have no problems teamviewing my desktop via my iphone or laptop or any device with teamviewer on it. Works fine.

Bigpond (the isp I am with) refreshes my ipaddress everytime I connect but my DHCP reversation addresses are always the same.

This topic is now closed to further replies.
  • Posts

    • No, size is not the only selling point. I did not even remotely say that. Your claim was that "building your own will be faster and cheaper". This is false. You cannot build something close to that form factor with off-the-shelf parts. You can build a Mini-ITX PC and pay more, or something larger and pay less. But these are different market segments. It's apples and oranges.
    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!