Help Selecting New GFX Card


Recommended Posts

yes, you've alread asked and been told once. that's a great psu and it would power even the top end cards like a 580 or 7970 (just the one mind, you'd want something better for sli or crossfire :p).

Ok, it says ETA: 20/02/2010. Does that mean I'll receive it on that date, or is that when OcUK get the card?

That'll be the day OcUK get it, so depending on the delivery option you choose next day to a few days later you will get it.

Lol, ok and also I previously had the 8600GTS which died, so when I install this card I won't have to reinstall Windows do I?

Cos I''m thinking the nVidia drivers will clash with the new card's drivers...

you'll absolutely want to uninstall any current drivers first. shut down the computer, pop in the new card, allow windows to boot, then finally install the latest available drivers. for the love of God please dont install the drivers that are included with the graphics card!

you'll absolutely want to uninstall any current drivers first. shut down the computer, pop in the new card, allow windows to boot, then finally install the latest available drivers. for the love of God please dont install the drivers that are included with the graphics card!

Well the problem is, cos my gfx card died and I have no spare card, there is no way to use my PC till I get the new card :( So I can't uninstall the drivers first :cry:

OK, just seen this;

http://www.overclockers.co.uk/showproduct.php?prodid=GX-160-EA&groupid=701&catid=1914&subcat=1830

EVGA GeForce GTX 460 Superclocked 1024MB GDDR5 - ?107.99 excl. P&P :o

Really tempted to get it...

with a ?100 budget you should not consider anything less than a GTX460 or 6850. i wouldn't touch 550/67xx cards with a bargepole.

I agree, I had the money so I opted for 2xGTX460's in SLi, works wonderfully.

[edit]

For some reason I only saw one page and when I entered my comments the rest appeared (Forum bug?) glad you settled on a card in the end :)

[/edit]

Ok guys will be ordering defo tomo, so need to finalise soon.

If you can afford the GTX 460 then I'd go for it that's a good deal and its pre-OCed by EVGA, so even though the benchmarks poster earlier showed the 6850 ontop that GTX460 will be a good bit better.

Ok guys, both cards are same price now (actually 460 is cheaper :blush: )...

I'm going for the GTX 460 :)

My doubt now is the current video card drivers crashing with the new card. I can't remove the old drivers as I have no other spare card...

Could I remove the drivers in safe mode when booting with the new card for the first time?

Ok guys, both cards are same price now (actually 460 is cheaper :blush: )...

I'm going for the GTX 460 :)

My doubt now is the current video card drivers crashing with the new card. I can't remove the old drivers as I have no other spare card...

Could I remove the drivers in safe mode when booting with the new card for the first time?

Uninstall the old drivers, take out the old card, plug your monitor into the on-board graphics port, install the new drivers and reboot. Should be pretty straightforward. The motherboard should automatically use the on-board graphics port when it doesn't see the old GPU.

Uninstall the old drivers, take out the old card, plug your monitor into the on-board graphics port, install the new drivers and reboot. Should be pretty straightforward. The motherboard should automatically use the on-board graphics port when it doesn't see the old GPU.

Ok, I've got a P5N-E mobo which doesn't have onboard graphics :o

Ha! You should be able to skip plugging into the mobo then to install the new drivers. So now you'll want to: Uninstall old drivers > Install your new GPU > Install new drivers > Reboot.

I can not uninstall the old drivers because I can't access Windows as I have no working video card, my current video card has Died. I do not have a spare video card, and the next card I'll be getting is the GTX 460 which will arrive in a few days.

What I want to to know is, can I remove the old drivers whilst in Safe Mode with the new card installed.

So basically, I'll pop the new card in, boot into safe mode, and remove the old drivers, then restart and boot into normal mode and install the new drivers.

Is this possible?

Yes that's totally possible. You could even load into Windows as you would normally do and uninstall that way. Windows will just use the generic drivers until you install the correct drivers. It may even install a driver specific to the card automatically, but you'll still want to go to Nvidia and get the drivers from there.

If your replacing nvidia for nvidia you dont need to uninstall the old drivers, just plug the new card in, boot windows let it do its thing, voila, good to go.

That's completely true, some times. I've had some problems in the past where I was replacing an older ATI with a newer one and dropped the new drivers over the old ones. Things didn't work properly until I uninstalled everything and then re-installed the new ones.

I always do it as a precaution, not that it's always entirely necessary.

  • 2 weeks later...

Thanks a lot for your help guys.

I got the new the card, popped it in. Booted into safe mode, removed the old drivers. Booted into normal mode, visited nvidia's site and installed the latest drivers and BOOM.

Playing all my games MAXed out now :woot:

Success, thanks once again... :D

Just one more question. I've registered the card today and have received a 10yr limited warranty.

If the card dies say in 4/5yrs time, does that mean I can send it back for replacement?

I'm unsure how this warranty works, if someone could kindly shed some light,

It usually depends on the terms of the warranty. Most of the time though, the warranty only covers manufacturer's defects. If a part on the board fails, you can send it back and get a replacement. If your PSU shorts and fries your GPU, you're screwed. Best thing to do is read the terms and conditions of the warranty.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Is the article messed up? I understand 26H2 is in Beta, now Build 28020.2308. I'm not even sure what this is supposed to mean: "..... Microsoft is officially moving the Experimental Channel to version 26H2." And...would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!