Recommended Posts

Hello, my boss has an existing setup with 2 monitors being powered by a Radeon HD card. I don recall the model number.

Anyhow it works great but now he wants to throw a 3rd monitor in the mix and this card does not support that. Can anyone recommend a video card that can support 3 monitors and is under $100.00?

I would prefer Nvidia but AMD is OK also. Ideally we would need a PCI X 16 card and that contains outputs for VGA, DVI and HDMI. This is how each one of the monitors can connect.

Right now he is using DVI and HDMI ports.

Thanks for the help!

Link to comment
https://www.neowin.net/forum/topic/1057724-video-card-for-3-monitors/
Share on other sites

It would only be possible with an ATI card that does Eyefinity.

These are the only capable cards.

  • AMD Radeon? HD 6870 GPUs
  • AMD Radeon? HD 6850 GPUs
  • ATI Radeon? HD 5970 GPUs
  • ATI Radeon? HD 5800 Series GPUs
  • ATI Radeon? HD 5700 Series GPUs
  • ATI Radeon? HD 5670 GPUs
  • ATI Radeon? HD 5500 Series GPUs
  • ATI Radeon? HD 5450 GPUs
  • ATI Mobility Radeon? HD 5400 Series or higher GPUs

You can also have multiple video cards in a single system. I personally use two ATI 4960's to drive three monitors. They don't have to be identical cards, but it sure does un-complicate driver issues if they are the same. So it may be possible to just add on another video card for that third monitor as opposed to replacing the existing one entirely.

I have one of the eyefinity cards. one 32", one 21" and one 19" monitor. I do not play game videos, using VLC, on all 3 monitors at once. I believe i spent about $150 for the card with 1gb on it.

I'm out of town for a few days, but in case you want to know the specific card send me a PM and I can get the specific details Wed.

You will have to have HDMI and/or DVI conections

i really enjoy my hd5830, and it can be had on ebay for 100 or less and it does 3, pretty good miner card also for the money

  • Output 2 x Dual-Link DVI
  • 1 x HDMI
  • 1 x DisplayPort
  • GPU 800 MHz Core Clock
  • 40 nm Chip
  • 1120 x Stream Processors
  • Memory 1024 MB Size
  • 256 -bit GDDR5
  • 4000 MHz Effective

Wow thanks for all the feedback. I like the one on Ebay and the Asus. We will just stick with one card but thanks for the advice on two of them.

James I appreciate it but the cost needs to be under $100.00

Yeah I'm quite sure you'd need something like this though someone can correct me if I'm wrong. So keep in mind that's another 25 bucks there.

EDIT: This says it supports 3 monitors and it's just two DVI ports and HDMI (so obviously no need for an adapter on this one). Just keep in mind the size of the heatsink for the system you're putting it into.

Yeah I'm quite sure you'd need something like this though someone can correct me if I'm wrong. So keep in mind that's another 25 bucks there.

EDIT: This says it supports 3 monitors and it's just two DVI ports and HDMI (so obviously no need for an adapter on this one). Just keep in mind the size of the heatsink for the system you're putting it into.

Another issue is what the card will be used for. Gaming is a big use - but some non-gaming *application* software (TD Ameritrade's ThinkOrSwim, for example) can also use three displays. A bargain non-gaming/light-gaming Eyefinity card is the VisionTek HD6670 2GB GDDR3 PCIe card. It falls below your $100 cutoff (even when not on sale) and can be found at retail (Best Buy and MicroCenter) and online (Newegg, Amazon, microcenter.com. etc.)

AN identical card is also avaiilable from XFX.

You know he uses ThinkorSwim every day! No gaming done here all business apps and internet.

+jeston are you sure that what you are saying applies to all Eyefinity cards?

I want to make this simple for him

+jeston are you sure that what you are saying applies to all Eyefinity cards?

I want to make this simple for him

100% positive. Take a look here for more information as well as a list of validated adapters.

Edit:

Yeah I'm quite sure you'd need something like this though someone can correct me if I'm wrong. So keep in mind that's another 25 bucks there.

EDIT: This says it supports 3 monitors and it's just two DVI ports and HDMI (so obviously no need for an adapter on this one). Just keep in mind the size of the heatsink for the system you're putting it into.

Hmm that is interesting... I'll have to look into this a little more.

You know he uses ThinkorSwim every day! No gaming done here all business apps and internet.

That was meant more for other folks - not the OP. I have ThinkOrSwim's thinkDesktop (the paperMoney version) installed here, and I certainly can see why the triple-monitor play would be of use to a trader (even though I use it with just one display - due to lack of space for additional displays).

The other reason I would prefer the HD6670 is that (unlike most other Eyefinity-supporting cards) it doesn't require anything more than what comes through the PCIe bus power-wise - even better, it only takes up *one slot*.

This topic is now closed to further replies.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!