Recommended Posts

Is anyone running fine with doing an upgrade? Just seems unbelievable to me that in 2012 we're still having to do clean installs.

I did an upgrade install and haven't hit any major snags yet. I locked up the App Store while it was downloading updates because I put my Mac to sleep which was odd... I haven't tried to repeat it, may have just been a fluke. Other than that my computer feels very snappy. It is at least as snappy as it was w/ previous Lion installed, if not a little snappier. So I'm satisfied with the upgrade and probably won't do a clean install.

If you are upgrading from Snow Leopard you might want to do a clean install.

Is anyone running fine with doing an upgrade? Just seems unbelievable to me that in 2012 we're still having to do clean installs.

I upgraded from Lion on both my Retina MBP and 27'' iMac, despite the fact I normally do clean installs. Both work fine and feel as fast (if not faster) than Lion did on the same hardware.

Also glad to see iWork got an update to take full advantage of the Retina Display.

My upgrade completed fine, no issues here. Well, other than Minecraft not being codesigned....

Same with a few other apps I use, I had to disable it for now, hopefully more and more apps will be signed in the future so I won't need to have it disabled!

Same with a few other apps I use, I had to disable it for now, hopefully more and more apps will be signed in the future so I won't need to have it disabled!

The few apps that you have can be manually bypassed without having to turn off gatekeeper completely

The few apps that you have can be manually bypassed without having to turn off gatekeeper completely

Really? There is a way to manually bypass gatekeeper?

Aside from a more polished feel from Lion, most apps seem to work fine, but only if I completely disable gatekeeper. SkyDrive is the only one that complains about unable to access KeyChain, but there is a workaround for it.

From 2010 MBP 15" battery tops out at 2 hours under Mountain Lion, as opposed to 2 and half under Lion... as opposed to 6 hours under Snow Leopard.. (all with SMC reset)

Control-click or right click the app, and select Open.

http://support.apple...US&locale=en_US

Oh that is good, so basically now I had it off, if I enable it those non-signed apps will continue to work because I have already opened them? (until maybe they update but by then should be signed anyway)

Oh that is good, so basically now I had it off, if I enable it those non-signed apps will continue to work because I have already opened them? (until maybe they update but by then should be signed anyway)

Yes they'll continue to work, but I think you'll need to enable them (using the method I previously described) after turning Gatekeeper back on.

The thing is though, Apple doesn't support clean upgrades anymore. That isn't their official way of doing it. Right now we can still go inside and boot the installer but in a future scenario we may not be able to do that anymore, then what? We will all be doing upgrades eventually.

Also I just did a clean install of Lion like 2 months ago I barely had anything installed at all. Photoshop was like the only app which I've actually had to install all my other apps were just drag and drop to the apps folder. I've thus done no customization of anything and I was running the latest Lion update before upgrading.

Anyway everything is fixed now so I'm happy.

+Vice:

They can't get rid of "Clean Install" procedures. What if your Mac hard drive died and you had to get a new one? What are they going to do then? Force you to install Lion first so that you can then install the Mountain Lion upgrade? I don't think so.

"Clean Installs" will always be there. They say Macs for the most part don't need to be restarted after installing stuff but I always do it anyways just in case. Also, Circaflex is right, if you do an "upgrade" then you should also do a "repair permissions" thing just to make sure everything is in place.

The thing is though, Apple doesn't support clean upgrades anymore. That isn't their official way of doing it. Right now we can still go inside and boot the installer but in a future scenario we may not be able to do that anymore, then what? We will all be doing upgrades eventually.

What if the world ends tomorrow, then what?

What you're saying makes little sense really. The ability to do a clean install always needs to be there. If only when you install a new HDD in your Mac or in the scenario your entire system gets corrupted due to whatever reason.

I don't think they will let you do a clean install eventually using the App Store download. I think the only way you'll be able to do it eventually is by using the recovery partition after already installing the latest OS release as an upgrade (To get the recovery partition in place). Which answers your question .Neo as to how they would handle HD Death.

I don't think they will let you do a clean install eventually using the App Store download. I think the only way you'll be able to do it eventually is by using the recovery partition after already installing the latest OS release as an upgrade (To get the recovery partition in place). Which answers your question .Neo as to how they would handle HD Death.

How is that scenario any different from today's? The way you do a clean install right now is by extracting the recovery partition image from the updater, restore it to a USB stick, boot from it, wipe your HDD and reinstall. The recovery image has to remain there somewhere in the updater package otherwise it can't be put in place to begin with.

What you're fearing became last year's reality, yet I continue doing my erase & installs just fine.

How is that scenario any different from today's? The way you do a clean install right now is by extracting the recovery partition image from the updater, restore it to a USB stick, boot from it, wipe your HDD and reinstall. The recovery image has to remain there somewhere in the updater package otherwise it can't be put in place to begin with.

What you're fearing became last year's reality, yet I continue doing my erase & installs just fine.

I'm not fearing anything. I did an upgrade and not a clean install, I don't do clean installs. I want them to make the upgrade system the most reliable there is because that is the way we should be upgrading our systems. Clean installs is something Windows users should have to deal with, not us on OS X. Our OS is supposed to be easier.

But again in future I foresee the OS becoming more compartmentalized in to a series of individual updates and the notion of purchasing the OS or even receiving a whole bunch of updates in one go (like a major OS update) will be a thing of the past and instead incremental updates more akin to .1 point releases will become the norm. That is where I foresee Apple taking us and at that point clean installs will not be possible you'll only be able to reset the machine back to the base OS from a few years ago and then after the install is completed a large update download will begin with all the changes since then to current day.

Turning OS X Releases more in to service packs is I think the avenue they will take.

I'm not fearing anything. I did an upgrade and not a clean install, I don't do clean installs. I want them to make the upgrade system the most reliable there is because that is the way we should be upgrading our systems. Clean installs is something Windows users should have to deal with, not us on OS X. Our OS is supposed to be easier.

But again in future I foresee the OS becoming more compartmentalized in to a series of individual updates and the notion of purchasing the OS or even receiving a whole bunch of updates in one go (like a major OS update) will be a thing of the past and instead incremental updates more akin to .1 point releases will become the norm. That is where I foresee Apple taking us and at that point clean installs will not be possible you'll only be able to reset the machine back to the base OS from a few years ago and then after the install is completed a large update download will begin with all the changes since then to current day.

Turning OS X Releases more in to service packs is I think the avenue they will take.

They will never abandon SIU, NB, NR. It's half the feature of their EFI setup. I completely disagree with you and you're only looking at it from a "consumer" view. They use too many tools for their own deployments to abandon these methods.

I did an upgrade, that is the route I have taken with all of the prior OS X releases that have allowed you to do so and never had any issues.

So far I had a really weird issue where I checked out Airplay Mirroring with my Apple TV (I have a 2011 Pro that is compatible, and it worked, was a little wonky but worked, and I turned it off after about 2 minutes. Did some other stuff, ate dinner, come back to my laptop, resumed from screen saver to find the desktop at some weird low resolution. like 1152 I think it was. Was not filling up the screen, just looked like utter ass. Went into Display settings, and nothing I did would get out of it. I would click an every display option to just have it do nothing. Was stuck at this craptastic resolution.

Restarted and all was back to normal, but definitely was not digging it. About to verify and repair my permissions then disk if need be, have not done that yet, but really hoping this does not wind up being the first time I regret going the upgrade route.

This topic is now closed to further replies.
  • Posts

    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!