How many bad sectors are too many?


Bad sector poll  

54 members have voted

  1. 1. How many bad sectors are too many?

  2. 2. If spinrite has found and repaired 1 or more bad sectors would you continue to use the drive?

    • I would continue to use the drive
    • I would replace the drive as soon as possible.


Recommended Posts

1 and I'd make sure to get my a** over to a new drive asap.

I hate data rot with a passion and I think it's time all filesystems become aware of this issue.

I'd adore Apple to start talking to Oracle again about ZFS.

Yes, you can buy a 3rd party implementation, but:

I won't let some 3rd party touch my holy grail (my data) via them implementing a filesystem through hoops on my otherwise unsupportive OS.

When things get messy, you don't get broad support.

(recovery tools for your OS, etc... At least not the same range to pick from...)

I'm actually shocked we're still in the medieval ages of data integrity here...

Glassed Silver:mac

Bad sectors are unavoidable with hard drives. It's a physical problem with the technology. Further, it's not a problem that can't be "fixed" at least temporarily using a form of check disk, moving that data to another, good sector and marking the bad sector as such. It's nothing new and nothing that can really be avoided when dealing with hard drives.

A drive with bad sectors should be replaced as it is almost always a sign of impending doom.

  • Like 2

1....just 1...I mean I'd use the drive for some VM I didn't care for as soon as i ran some diagnostics and tried to replace the bad sector...but that's about all, as I wouldn't ever trust it. Ever.

This just happened on my work laptop - it suddenly got really slow, and SMART status reported a bad sector. I called help desk, and I had them replace it (had it expedited as they said it would take 3 business days, but that was unacceptable to me - so I had a replacement sent within an hour). Luckily I have most of my work backed up or on a network share or on sharepoint.

  • Like 1

As soon as there's a single read error that makes it a pending sector, I try to remove all data and then proceed to calculate its location and repartition it. Then I continue to use such drives for stuff that isn't important, especially now when prices are so freaking inflated. Only once bad sectors have continued to spread and soon the drive was done. For the rest I even have one with bad mechanics - it frequently recalibrates while turned on. I'm still using it as external, for various trash.

  • 3 weeks later...

I had a customer bring me her computer, because she couldn't open any applications. So like always unless it's a known malware infection, I first scan the hard drive for bad sectors with Spinrite. 46% into the scan it found 3 bad sectors. Then at around 90% of the scan it found another 300 bad sectors. So I called her and told her what I found.

I HIGHLY recommend she replace the drive. I told her I had one here I could put in. The drive had been repaired good enough at this point to be cloned. She said she wanted to take her chances with the drive. I explained to her that the drive is cloneable right now. If she takes her chances, the next time she brings it to me, I would have to

A) repair all the old or new bad sectors all over again

B) The drive might be so bad I can't clone it and would have to change her for a reinstall of windows on the new drive.

She still wanted to "Take her chance". So before I gave the computer back to her I cloned the drive on to a new drive I had in my office, just in case. Well today she called me (1 1/2 days later) and said the computer had worked good for about a day and now it's doing the same thing all over again.

I actually tell the customer that I would replace it but if you don't have any critical information on there, then just do a HAL, and use it till it fails Dave....

jf

But then if it fails you'll have to reinstall the OS which would be an extra cost to the customer. When you could just clone the drive now and it would just be part of the current labor.

Bad sectors are like cancer for hard drives. When you get one it's often a sign of a head crash, there is physical damage to the platter and possibly the head and there can be debris from the damage. Bad sectors will often spread to adjacent sectors and every time it does you lose more data. For me if a drive develops a bad sector that's it, it can no longer be trusted and I replace it asap.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You can't, if you didn't notice, it doesn't support surround at all, it's right in the spec list.
    • Hi — I’m always interested in soundcards. Like displays, I just want to know I’m getting as much clean “sonic juice” into my brain as possible as the years take their toll. I’m not entirely sure what to take away from this review, though. It doesn’t really tell me whether the AE‑X is a good product or who it’s actually for. Most of what I’m getting is: there’s a driver to install, here’s what it looks like, and here’s what’s in the box. There’s a lot of emphasis on the SPDIF input. When you mention not needing to switch headphones between console and PC — does that mean the PC has to be powered on just to pass audio through? That seems like a fairly big waste of energy. Is this more something a streamer would use alongside a capture card? How are you testing the sound? (Also, you might want to clarify that you’re using the headphones in wired mode when you mention they’re wireless.) You mention the lack of EMI shielding — how much real‑world difference does that make compared with typical motherboard audio? On multi‑channel: what exactly isn’t supported? Does this mean Windows spatial audio (Dolby Atmos for Headphones, DTS Headphone:X, etc.) won’t work, or just that the card itself doesn’t decode surround formats? And are there any true multi‑driver “surround” headphones left that would even use that? You also highlight support for high‑impedance headphones — but what does that translate to in practice? How does it compare to driving the same headphones from a normal device, and does it make any difference for everyday, lower‑impedance models? In short, who is this card actually targeted at?
    • Yes, THIS is wordart, not the styling that can now be done. Wordart was all about those curvy words, that you could change the path of, like making words go around a circle. I don't think it can be done now, right?
    • Just saw a news report of a Waymo driving into a flooded road.
    • Password Safe 3.72.0 by Razvan Serea Password Safe is a password database utility. Like many other such products, commercial and otherwise, it stores your passwords in an encrypted file, allowing you to remember only one password (the "safe combination"), instead of all the username/password combinations that you use. Once stored, your user names and passwords are just a few clicks away. Using Password Safe you can organize your passwords using your own customizable references—for example, by user ID, category, web site, or location. You can choose to store all your passwords in a single encrypted master password list (an encrypted password database), or use multiple databases to further organize your passwords (work and home, for example). And with its intuitive interface you will be up and running in minutes. PasswordSafe was originally designed by the renowned security technologist Bruce Schneier and released as a free utility application. Password Safe 3.72.0 changelog: Fixed bugs Improved font scale handling - should resolve font size issues on high resolution displays. GH1749 In the Master Password Setup window, "Show Master Password" is no longer truncated on some displays. GH1092, SF1595 Size and position of main window is now correctly restored on scaled displays. SF1630 Keep password expiry date when both password and password expiry are changed; don't clear a non-recurring expiry when the password's changed. SF1628 Custom values can now be copied to the clipboard in read-only mode via Ctrl-C and right-click->Copy Value. New features GH1196 Dark display mode support: Password Safe now supports the system display mode, as well as setting the mode directly via Manage->Options->Display->Display Mode. This change also updates the general "look & feel" of the app to the current Windows theme. Known limitations: The Date picker and keyboard shortcut controls do not switch to dark theme The Customize Toolbar dialog does not switch to dark theme Custom Field support has been added to the more advanced features: Filters XML and Text import and export Comparison, Sync and Merge databases SF938 Custom field values may now be selected by name and copied via a "Copy Custom Field Value..." submenu in the entry context popup menu. SF936 Notes and Custom fields layout now overlap, selectable by tabs, resulting in a more compact and less cluttered layout. SF935 Autotype: Specifying '\v{name}' in the autotype text will cause the corresponding value to be autotyped. Download: PasswordSafe 64-bit | Portable 64-bit | ~20.0 MB (Open Source) Download: PasswordSafe 32-bit | Portable 32-bit View: PasswordSafe Website | Quickstart Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      74
  • Tell a friend

    Love Neowin? Tell a friend!