Power Supply Dying?


Recommended Posts

I have an Antec SP500 500W power supply that I got in 2006 when I built my desktop (specs in sig.) I haven't had any problems with it until now. Today, the power supply has started making a really high-pitched whining noise. It's defiantly the power supply (placing my ear right up next to the back of it is the loudest). While the PC is powered on, the noise is constant, and it persists for a little while after shutting down. If I put the computer to sleep, the noise alternates between a high pitch and a slightly lower pitched noise and then subsides after a while. During this period, after shutting down, if I pull the power plug from the back of the unit, the noise stops, likewise it does if I flip the switch on the back. I haven't noticed any other power-related issues, but this high-pitched noise is really annoying and I think actually gave me a headache today. I guess it's time to replace the unit?

Link to comment
https://www.neowin.net/forum/topic/1059644-power-supply-dying/
Share on other sites

from the way your descibing it it sounds like a fan in the psu is going ...why risk it? replace it before you have the replace a lot such as a motherboard if the psu blows

I second this, only I press it further, (with plenty of luck)....I always replace a dead power supply fan with a new fan when I hear that fan squeal...or what else I've found, and I'm not joking here...is that KY massage oil usually (if applied sparingly to ONLY the fan bearings, let sit a while, turn by finger (no pun intended)....and those stuck fans will usually free themselves....just MAKE SURE you've properly discharged the capacitors (again, no pun intended) from the power supply...google can help you there...also....wait for the oil to seep into the bearing/bushing...then cover the back with a fresh little strip of duct tape....make SURE you wipe up any excess oil...I.E., do NOT let it drip....ANYWHERE or touch ANY wires....if you use a push-pin, or a baby pin, and put about three dabs of it into the bearing/bushing, ..it can end up okay. I have done this on I can't tell you how many fans that have been ruined...well, almost....in this west-texas dust....power supply, case fans....even a graphics card, although it was so meticulous, it scared me, lol! But it is possible....just not advisable. :shiftyninja:

Thanks everyone. I don't really feel comfortable with opening up a power supply just to lube up a fan. I've always heard the warnings about not opening up a power supply and I had a bad experience with a capacitor when I was a kid trying to take apart a camera. Ever since then, I haven't taken them lightly. I'd rather buy a new power supply than shock myself. Anyone have any recommendations for a decent ~500W power supply for about ~$50 or less?

It doesn't sound like a fan issue anyway. A high pitched sound usually means a MOSFET is on it's way out or already dead. It would just be a matter of time before it dies completely.

Just a random guess, but your voltage rails might not be at the levels they should be, so your motherboard and other components might be at risk if this is true.

But yeah, hurry up and get that PSU replaced.

Thanks everyone. I don't really feel comfortable with opening up a power supply just to lube up a fan. I've always heard the warnings about not opening up a power supply and I had a bad experience with a capacitor when I was a kid trying to take apart a camera. Ever since then, I haven't taken them lightly. I'd rather buy a new power supply than shock myself. Anyone have any recommendations for a decent ~500W power supply for about ~$50 or less?

Your gonna struggle to find a high quality 500W PSU for $50...just filtering on newegg http://www.newegg.com/Product/Product.aspx?Item=N82E16817171031 is the only one I'd suggest.

If you can afford a bit more in the 50-75 range there are some good ones, including this Corsair one http://www.newegg.com/Product/Product.aspx?Item=N82E16817139027

It doesn't sound like a fan issue anyway. A high pitched sound usually means a MOSFET is on it's way out or already dead. It would just be a matter of time before it dies completely.

Just a random guess, but your voltage rails might not be at the levels they should be, so your motherboard and other components might be at risk if this is true.

But yeah, hurry up and get that PSU replaced.

I agree, it doesn't sound like a fan issue at all... especially for the fact that it is still whining after you power off.

Even though i would still replace it, i would recommend you clean your components, because dust build up can harm your components, most likely the case here.

if that's the same noise i heard on my old Emachines PC it's sort of faint but you can definitely hear it and it also stopped once i unpluged it or hit the switch. but that PC don't see much use anymore and it's not a standard PSU in it etc so i just did not worry about it. but as others have said... if you got some spare $$$ it could not hurt replaceing it now before it possibly gets worse.

but on my current PC my PSU ended up giving me some warnings like turning off and not wanting to turn on etc etc before it got to the point i just said the hell with it and got a replacement (but it eventually completely died before i ordered a new one though as it would not turn on at all). it was a shame as i had that PSU for roughly 4 years and it was $109.99 new (back in March 2006) and it was a Enermax Liberty 500watt PSU. my replacement is a 630watt Rosewill which i got for about $60 back i think in about mid-2010,

p.s. i generally leave my PC on 24/7.

  • 4 months later...

Sorry to bump this, but, it finally died today. Had the PC powered off for a few days while I was on vacation and when I flipped the switch on the PSU and hit the button to power on the PC, it stuttered (heard the fans try to power up and the case lights flickered. Shortly thereafter, I smelled a burning smell. Just hope nothing aside from the PSU is fried. If so, I'm not too concerned; it's an excuse for me to make some upgrades which are long overdue.

I think that I may need more than just a new power supply now. I tested a known working 350W supply with the computer and after connecting just the 24-pin power connector and 4-pin power connector to the motherboard, nothing happens when hitting the power button. I probably should've replaced the poser supply before it blew. :/

Yes... Yes you should have. Just as everyone had stated previously.

I know that high pitched noise all too well, and it should persist even with the computer turned off, so long as the PSU is plugged into power.

Once that starts up, you should buy a new PSU the next day because you never know when it'll decide to die after that point.

I have an Antec SP500 500W power supply that I got in 2006 when I built my desktop (specs in sig.) I haven't had any problems with it until now. Today, the power supply has started making a really high-pitched whining noise. It's defiantly the power supply (placing my ear right up next to the back of it is the loudest). While the PC is powered on, the noise is constant, and it persists for a little while after shutting down. If I put the computer to sleep, the noise alternates between a high pitch and a slightly lower pitched noise and then subsides after a while. During this period, after shutting down, if I pull the power plug from the back of the unit, the noise stops, likewise it does if I flip the switch on the back. I haven't noticed any other power-related issues, but this high-pitched noise is really annoying and I think actually gave me a headache today. I guess it's time to replace the unit?

I used to have one of those. Its a sign its dying. The capacitors are most likely swollen. I believe that sound is the power output coil.

I no longer buy Antec. I warrantied mine and they sent me another with the same crappy capacitors. The replacement died after a year.

Go buy something like Corsair, Seasonic, or anything with a PLUS 80 rating.

BTW I have never seen a PSU cause damage to a mainboard from failing. I repair PSU all the time for the company I work for and I am also a computer tech on the side. Seen many cheap chinese power supplies blow and never had to replace a board because of it.

Shorting the PS_ON/COM (I use a paper clip) on the 24pin mobo cable (obviously not while connected to PC) will run it independently of the PC and confirm if it's the PSU or something else. It's most likely the fan's ball bearings as others have said. If it is the fan, it can be changed, or you can get a new PSU.

I'm at a loss here. I have basically disconnected everything from the motherboard except for the processor, RAM, connectors for the power/reset button, and obviously the power cable. The known working power supply that I'm testing with is a 350W. May this not be powerful enough for my motherboard and that's why it's not working? Furthermore, I've noticed that there are three bulging capacitors on the video card (a 256 MB ATI Radeon x700). Could this have been caused by the original power supply failing?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!