• 0

Formatting a listview item


Question

Hey people!

I have pulled information from an access table into a listview item within Visual Basic 2010. It displays all the information, field by field how I want it...however one of the fields has a lot of text. It stops after the specified lenght with ... suggesting there is more text that doesn't fit. I have used "-2" to make it longer, but then it's too long. Also scrolling wouldn't be very nice.

I'd like it to display the information from the field on two lines, but I can't figure it out. Here's my existing text (without the dims as I've made it flat at the moment)


objConnection = CreateObject("ADODB.Connection")
objRecordset = CreateObject("ADODB.Recordset")
dbasename = "D:\technicianmanagement.MDB"
tblname = "FaultCalls"
objConnection.Open("ProviderMiMicrosoft.Jet.OLEDB.4.0; Data Source = " & dbasename)
objRecordset.Open("SELECTOM " & tblname & " ORDER BY DATEREP DESC, TIMEREP DESC", objConnection, adOpenStatic, _
adLockOptimistic)

lvref.Clear()
lvref.View = View.Details
lvref.Columns.Add("Ref, HorizontalAlignment.Left)
lvref.Columns.Add("User, HorizontalAlignment.Left)
lvref.Columns.Add("Asset0, HorizontalAlignment.Left)
lvref.Columns.Add("Fault, HorizontalAlignment.Left)
lvref.Columns.Add("Assigned, HorizontalAlignment.Left)
lvref.Columns.Add("Date, HorizontalAlignment.Left)
lvref.Columns.Add("Time, HorizontalAlignment.Left)
lvref.Columns.Add("Email, HorizontalAlignment.Left)

Do While Not objRecordset.EOF

MyListText(0) = sID
MyListText(1) = sUser
MyListText(2) = sAsset
MyListText(3) = sFault
MyListText(4) = sAssigned
MyListText(5) = sDate
MyListText(6) = sTime
If sEmail = True Then MyListText(7) = "Yes" Else MyListText(7) = "No"
MyListItem = New ListViewItem(MyListText)
lvref.Items.Add(MyListItem)
objRecordset.MoveNext()
Loop
[/CODE]

Link to comment
https://www.neowin.net/forum/topic/1059766-formatting-a-listview-item/
Share on other sites

9 answers to this question

Recommended Posts

  • 0

The problem is that the included listview control does not support multiple lines. (sorry) The general view is that the user will expand the column so that they can see the entire text.

I did a quick search and there are comments about 3rd party controls that allow multi line, but this is an unstandard pattern so be aware.

Sorry I can't give you the answer you wanted. I would really rethink the amount of data that you are showing.

  • 0
  On 23/02/2012 at 14:24, Daedroth said:

Hey people!

I have pulled information from an access table into a listview item within Visual Basic 2010. It displays all the information, field by field how I want it...however one of the fields has a lot of text. It stops after the specified lenght with ... suggesting there is more text that doesn't fit. I have used "-2" to make it longer, but then it's too long. Also scrolling wouldn't be very nice.

I'd like it to display the information from the field on two lines, but I can't figure it out. Here's my existing text (without the dims as I've made it flat at the moment)


objConnection = CreateObject("ADODB.Connection")
objRecordset = CreateObject("ADODB.Recordset")
dbasename = "D:\technicianmanagement.MDB"
tblname = "FaultCalls"
objConnection.Open("ProviderMiMicrosoft.Jet.OLEDB.4.0; Data Source = " & dbasename)
objRecordset.Open("SELECTOM " & tblname & " ORDER BY DATEREP DESC, TIMEREP DESC", objConnection, adOpenStatic, _
adLockOptimistic)

lvref.Clear()
lvref.View = View.Details
lvref.Columns.Add("Ref, HorizontalAlignment.Left)
lvref.Columns.Add("User, HorizontalAlignment.Left)
lvref.Columns.Add("Asset0, HorizontalAlignment.Left)
lvref.Columns.Add("Fault, HorizontalAlignment.Left)
lvref.Columns.Add("Assigned, HorizontalAlignment.Left)
lvref.Columns.Add("Date, HorizontalAlignment.Left)
lvref.Columns.Add("Time, HorizontalAlignment.Left)
lvref.Columns.Add("Email, HorizontalAlignment.Left)

Do While Not objRecordset.EOF

MyListText(0) = sID
MyListText(1) = sUser
MyListText(2) = sAsset
MyListText(3) = sFault
MyListText(4) = sAssigned
MyListText(5) = sDate
MyListText(6) = sTime
If sEmail = True Then MyListText(7) = "Yes" Else MyListText(7) = "No"
MyListItem = New ListViewItem(MyListText)
lvref.Items.Add(MyListItem)
objRecordset.MoveNext()
Loop
[/CODE]

Not sure why you dont use DataGridView.

you can do DataGridView.Columns.Add([font=monospace]"Ref") [/font]DataGridView.Columns.Add([font=monospace]"User") [/font]DataGridView.Columns.Add([font=monospace]"Asset")[/font] etc.

[font=monospace]and then for the items you can do DataGridView.Rows.Add([/font]sID, sUser, sAsset, ...)

p.s. my VB.NET skills are rusty as I've been doing C# for a while now so ignore semicolons where not required ;p

  • 0


objConnection = CreateObject("ADODB.Connection")
objRecordset = CreateObject("ADODB.Recordset")
dbasename = "D:\technicianmanagement.MDB"
tblname = "FaultCalls"
objConnection.Open("ProviderMiMicrosoft.Jet.OLEDB.4.0; Data Source = " & dbasename)
objRecordset.Open("SELECTOM " & tblname & " ORDER BY DATEREP DESC, TIMEREP DESC", objConnection, adOpenStatic, adLockOptimistic)

DataGridView1.Columns.Clear()
DataGridView1.Columns.Add("Refef")
DataGridView1.Columns.Add("Userser")
DataGridView1.Columns.Add("Assetsset")
DataGridView1.Columns.Add("Faultault")
DataGridView1.Columns.Add("Assignedssigned")
DataGridView1.Columns.Add("Dateate")
DataGridView1.Columns.Add("Timeime")
DataGridView1.Columns.Add("Emailmail")

' Makes the form stretch to show all the columns that are visible.
Me.Width = DataGridView1.Columns.GetColumnsWidth(DataGridViewElementStates.Visible) + 60

' Clear all current rows of data.
DataGridView1.Rows.Clear()

Do While Not objRecordset.EOF
' You would probably want to do something like this... I put an in-line if statement to shrink the amount of code needed.
' The first parameter if If() is the expression, second is what to do if it is true and the third is what to do if it is false.
DataGridView1.Rows.Add(sID, sUser, sAsset, sFault, sAssigned, sDate, sTime, If(sEmail, "Yes", "No"))
Loop
[/CODE]

That should help you along.

Or... for more column size control etc.

[CODE]
objConnection = CreateObject("ADODB.Connection")
objRecordset = CreateObject("ADODB.Recordset")
dbasename = "D:\technicianmanagement.MDB"
tblname = "FaultCalls"
objConnection.Open("ProviderMiMicrosoft.Jet.OLEDB.4.0; Data Source = " & dbasename)
objRecordset.Open("SELECTOM " & tblname & " ORDER BY DATEREP DESC, TIMEREP DESC", objConnection, adOpenStatic, adLockOptimistic)

DataGridView1.Columns.Clear()

Dim DGVC(7) As DataGridViewTextBoxColumn
DGVC(0) = New DataGridViewTextBoxColumn
DGVC(0).HeaderText = "Ref"
DGVC(0).Name = "Ref"
DGVC(0).Width = 40
DGVC(1) = New DataGridViewTextBoxColumn
DGVC(1).HeaderText = "User"
DGVC(1).Name = "User"
DGVC(1).Width = 75
DGVC(2) = New DataGridViewTextBoxColumn
DGVC(2).HeaderText = "Asset"
DGVC(2).Name = "Asset"
DGVC(2).Width = 100
DGVC(3) = New DataGridViewTextBoxColumn
DGVC(3).HeaderText = "Fault"
DGVC(3).Name = "Fault"
DGVC(3).Width = 140
DGVC(4) = New DataGridViewTextBoxColumn
DGVC(4).HeaderText = "Assigned"
DGVC(4).Name = "Assigned"
DGVC(4).Width = 75
DGVC(5) = New DataGridViewTextBoxColumn
DGVC(5).HeaderText = "Date"
DGVC(5).Name = "Date"
DGVC(5).Width = 50
DGVC(6) = New DataGridViewTextBoxColumn
DGVC(6).HeaderText = "Time"
DGVC(6).Name = "Time"
DGVC(6).Width = 75
DGVC(7) = New DataGridViewTextBoxColumn
DGVC(7).HeaderText = "Email"
DGVC(7).Name = "Email"
DGVC(7).Width = 40
DataGridView1.Columns.AddRange(DGVC)

' Makes the form stretch to show all the columns that are visible.
Me.Width = DataGridView1.Columns.GetColumnsWidth(DataGridViewElementStates.Visible) + 60

' Clear all current rows of data.
DataGridView1.Rows.Clear()

Do While Not objRecordset.EOF
' You would probably want to do something like this... I put an in-line if statement to shrink the amount of code needed.
' The first parameter if If() is the expression, second is what to do if it is true and the third is what to do if it is false.
DataGridView1.Rows.Add(sID, sUser, sAsset, sFault, sAssigned, sDate, sTime, If(sEmail, "Yes", "No"))
Loop
[/CODE]

post-20891-0-97936800-1330062215.png

Edited by FuhrerDarqueSyde
  • 0

I decided against a DataGraidView for asthetics.

I found this command:

lvref.AutoResizeColumns(ColumnHeaderAutoResizeStyle.ColumnContent)[/CODE]

This resizes the field how I want, but again its too long. :(

Also, thanks for the help. I have added a datagridview for testing and comparison. Is there either way to make the datagridview or listview grow/shrink but keep ratios and autosize if the user resizes the form?

So if I resize the form, the text will go onto new lines, rather than the user having to use the scroll bar to view obscured text.

  • 0

Auto-Resizing: Me.DataGridView1.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.AllCells

Wrapping: Me.DataGridView1.RowsDefaultCellStyle.WrapMode = DataGridViewTriState.True

Useful?

(Also, you say you've gone against the DGV for Aesthetics... you can style them to look identical to a list view if you so wished... but imo you can make them look an awful lot better too!)

  • 0

That's worked on some, but not all cells.

Is there any way to get it working for the rows too?

I have tried:

Me.dgvfaults.AutoResizeRowsMode = DataGridViewAutoSizeRowsMode.AllCells[/CODE]

But that didn't work, as it says "'AutoResizeRowsMode' is not a member of 'System.Windows.Forms.DataGridView'"

Attached is what it looks like at the moment, but I'd like it so that it will resize with the form. Meaning it'll add extra lines if needed and shove the teext down.

post-395128-0-02155200-1330090307_thumb.

  • 0

After the loop can't you just do.


lvref.Columns(3).Width = -1
[/CODE]

That should resize it to the largest data item in the column. You may be able to set it to -1 before the loop and then it will do it as the data is added. My VB is very rusty so I can't remember exactly how it works (so rusty I could be way off as well)

  • 0

I've just programmed my first VB.NET in 2 years... here's a simple implementation of a ListBox with custom drawn mutli line items. Use it as you like...

(something went wrong, the attachment is attached twice)

OmgPonies.zipFetching info...

OmgPonies.zipFetching info...

This topic is now closed to further replies.
  • Posts

    • Mozilla really needed to focus on their core product for a while now. I will not mourn the death of pocket or AI garbage. One thing they don't do that I believe they should is advertise more, and not just to their core audience, especially their additional services. Let people know they actually exist.
    • Is this like tailscale?
    • I had no idea you could do this, thanks for the heads up!
    • Bonkers, really, when you think about the resources at Meta’s disposal.
    • You can now use Gemini in Google Forms to summarize responses by David Uzondu Over the last few months, Google has been aggressively pushing its Gemini AI into every corner of its Workspace apps, like generating entire documents from a prompt in Google Docs or creating fully editable charts in Sheets. Now, the company has set its sights on Google Forms. The latest update introduces a feature that uses Gemini to summarize text-based responses automatically. For any form with short-answer or paragraph questions, a new "Summarize responses" button will appear in the Responses tab once you collect more than three entries. Clicking it prompts Gemini to read the form's title, questions, and all the submitted text to spit out a summary of the key themes. Though Google bills this as a fresh expansion into Forms, we have actually had some Gemini intelligence in the app for a bit through the "Help me create a form" button. That feature, which drafts questions for you, was rolled out through the company's Workspace Labs program. For those unaware, Workspace Labs is basically Google's public testing ground, available in select countries, for new, and sometimes unproven, AI tools before a general release. Once a summary is generated, you can copy it to use elsewhere or hit "Retry" to see if Gemini comes up with a different take. If new responses roll in after you have generated a summary, you can click a "Refresh" button to update it with the latest data. For now, this feature is only available in English, and to use it, you'll need access to a paid Google Workspace plan, such as Business Standard, Business Plus, Enterprise Standard, or Enterprise Plus. It is also available to customers who pay for the Google AI Pro and Ultra plans or specific Gemini Education add-ons. The feature has started rolling out gradually, for Rapid Release domains, and will begin rolling out for Scheduled Release domains on June 26.
  • Recent Achievements

    • Week One Done
      Food-Beverages-Nutrition earned a badge
      Week One Done
    • Week One Done
      Tech Dogs earned a badge
      Week One Done
    • Enthusiast
      computerdave91111 went up a rank
      Enthusiast
    • Week One Done
      Falisha Manpower earned a badge
      Week One Done
    • One Month Later
      elsa777 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      272
    3. 3
      +FloatingFatMan
      199
    4. 4
      +Edouard
      199
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!