Which is better: Kingston or Samsung or G.Skill?


Recommended Posts

Thinkin of upgradin soon, what I have now is a joke, I need to know which is better performance wise?

Currently I'm lookin at this F2-6400CL5S-4GBPQ from G.Skill

http://www.gskill.com/products.php?index=209

Thanks in advance for any help.

Look for memory compatibility charts for your motherboard. Both Kingston and G.Skill usually have the best compatibility (all slots populated) but then Kingston has cheap but equally reliable ValueRAM series for budget computers. I haven't seen many Samsung modules for desktops, can't say anything about them.

Besides, you're looking at DDR2. What exactly are you "upgrayedd"-ing?

Both Kingston and G.Skill make great RAM. I personally have the Ripjaw series from G.Skill and it's really really nice. Kingston is great too, if not even more reputable than G.Skill.

I also wasn't aware that Samsung made memory, so I don't have any comment on them.

Thanks Astra, I noticed they are reputable just makin sure.

Almost everyone around here have one of those "GUYS" products in their rig.

OK, I'm going with F2-6400CL5D-4GBPQ

Thank you all guys.

I don't think Samsung sells retail memory modules, I think they are just the manufacturer.

They have entered the market with their own 30nm superslim and very low voltage sticks very recently.

My current setup is (as my friend said it) from the stoneage.

1GB

Where I can find those charts?

Sites of most notable motherboard manufacturers usually have them. Try googling your motherboard's model.

However, I must say that it's not practical to stuff huge amounts of RAM in your "stone age" system - other components will starve it and it will just consume power sitting half-empty. Performance-wise, nothing short of overclocking (and even then negligibly for most loads) will increase performance. And performance between brands of memory doesn't differ at all. Reliability does.

Lastly, I figure you might be running 32-bit system, too, so anything over 4 GB will not be available to you whatsoever - that's a physical limit. Motherboard might not even support such amounts (or large-capacity sticks in some weird cases).

Your best bet would probably be throwing in two random 1 GB sticks or one 1 GB stick (depending on whether you have 2 x 512 MB or 1 x 1 GB configuration currently) to have 2 GB in total. That would make it "bronze age".

However, I must say that it's not practical to stuff huge amounts of RAM in your "stone age" system - other components will starve it and it will just consume power sitting half-empty.

How do you know without first asking his usage habits? 1GB is pretty low these days, I can see that being a huge bottleneck if OP tends to have a lot of programs open at once.

So having said that, what exactly do you do on your computer OP? Knowing your hardware specs would also help.

PS: My computer uses DDR2 memory as well, and while it's certainly not the newest hardware around, it's good enough to power through all the games I've tried so far. Core 2 Duo 2.66GHz, with 4GB of RAM and an Nvidia Geforce 8600 GT. A computer doesn't need to be running hardware from the last year to be a workhorse.

the only time I've seen Samsung RAM was inside my MacBook Pro, and quite honestly I laughed my ass off when I saw it when I went to switch it out with the RAM I bought on Newegg

I've had good experiences with both Kingston and Gskill RAM, you can't really go wrong with either

They have entered the market with their own 30nm superslim and very low voltage sticks very recently.

If by very recently you mean like the past 10 years or so, then yes you are correct.

the only time I've seen Samsung RAM was inside my MacBook Pro, and quite honestly I laughed my ass off when I saw it when I went to switch it out with the RAM I bought on Newegg

Lol why? The past 2 laptops I've owned (8gb and 4gb respectively) have both come with Samsung RAM. Haven't had a single problem with any of them, and I generally never shut down (or even sleep / hibernate) my laptop.

the only time I've seen Samsung RAM was inside my MacBook Pro, and quite honestly I laughed my ass off when I saw it when I went to switch it out with the RAM I bought on Newegg

Samsung makes a huge portion of the RAM used in consumer machines. Most companies don't actually make their own RAM. They just buy the chips from companies like Samsung, finish the manufacturing process, and sell it under their brand.

Kingston is cheap and reliable but I don't think it is for performance. GSkill is cheap (although not as cheap as kingston) reliable and is good for performance. I have no experience with Samsung. If performance is what you are looking for then go with GSKill. It is the cheapest performance memory you can buy and it is reliable. The only thing that you have to look out for when buying GSKill is if the memory conforms to specifications. They have lots of memory so some does and some does not. The memory that does not follow specifications will only work on some motherboards. The problem with that memory is that you usually have to set the memory timing in the BIOS manually which means you have to know what you are doing. Then sometimes it needs a higher voltage than the specification calls for. This is not a problem if the motherboard allows you to set these settings. The reason the memory that does not follow the specifications like that is so that you can overclock or run it at higher speeds.

They have entered the market with their own 30nm superslim and very low voltage sticks very recently.

Sites of most notable motherboard manufacturers usually have them. Try googling your motherboard's model.

However, I must say that it's not practical to stuff huge amounts of RAM in your "stone age" system - other components will starve it and it will just consume power sitting half-empty. Performance-wise, nothing short of overclocking (and even then negligibly for most loads) will increase performance. And performance between brands of memory doesn't differ at all. Reliability does.

Lastly, I figure you might be running 32-bit system, too, so anything over 4 GB will not be available to you whatsoever - that's a physical limit. Motherboard might not even support such amounts (or large-capacity sticks in some weird cases).

Your best bet would probably be throwing in two random 1 GB sticks or one 1 GB stick (depending on whether you have 2 x 512 MB or 1 x 1 GB configuration currently) to have 2 GB in total. That would make it "bronze age".

thanks bro, my system is stone age but my MoBo is ASRock N73V-S

That's what I will be upgradin to:

Thermaltake Element V [VL200N1W2Z]

Core 2 Quad Q9450 (12M Cache, 2.66 GHz, 1333 MHz FSB) ark.intel

G.Skill DDR2 800MHz (F2-6400CL5D-4GBPQ)

Western Digital Caviar Green 1TB IntelliPower 64MB SATA II WD10EARS

Old specs: [No LOLin' or laughtin')

Not so much case (I dont think it has a name)

CPU: Celeron 1.8GHz

1GB Ram (Don't know manfuctuer)

80 GB HDD (Don't know manfuctuer)

Well the system you listed is much better than a Celeron. However, it may end up being more expensive in the long run, as your upgrade options are very limited. Buying a motherboard that uses DDR2 memory as indicated by someone else is a very bad idea. Also, some legacy hardware may be expensive to begin with. You're better off saving your money and building it right.

Ok then.

WD Caviar Blue. It's all colors: green - eco, blue - mainstream, black - enthusiast. Blue one spins at 7200 RPM, so no stupid slowdowns occur. Want to save power? Set a power profile to turn off hard disk when not in use for a certain prolonged time. Don't know about now when parts are in short supply, but thus far WD hasn't put very much people down.

Heh, well, hard disk probably is the one that will put the biggest dent in your budget. Damn those Thai floods :/

  • Like 2

Definitely go with a Caviar Blue over a Green. Those green models are terrible and a lot of people have countless issues with them.

I'm willing to bet you could piece together an i3 setup with DDR3 for pretty darn cheap.

Also, I'm assuming you are buying the Q9450 used for somewhere, correct? If not, it's a pretty expensive CPU, and you could definitely get more modern components much cheaper.

  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
    • Microsoft, totally not confusing /s 25H2 - Current for non-Arm based Windows 26H1 - Current for Arm based Windows 26H2 - Only for non Arm Windows
    • After I installed those, my older but capable Win 11 laptop (16GB RAM) reported it as 26H2 26300.8697. Then I installed it on my big laptop (128GB RAM! Hehe sorry), it reported it as 25H2 26220.8690. Ugh. Do I have to switch Insiders channels from Release to Beta?
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!