Recommended Posts

A few years ago I posted a build log of my old system on here where I showed the water cooling parts and such. Well I just finished building a new system and I thought I'd do the same again.

So to start with the components:

1x Intel Core i7 3930K CPU

1x EK LTX CPU Block (acrylic Top, Nickle plated copper base)

1x Asus Rampage IV Extreme Motherboard

2x Mushkin Redline Ridgebacks (16GB each / 32GB total - 1866MHz)

1x AX1200 PSU from Corsair (1200Watts)

1x Corsair Single Braided Modular Cable set for AX1200 PSU

1x Lian Li PC-X2000 Case with W2000 Side window

1x Laing 12v DCC+ Pump (18 Watt Model)

1x Phobia 1080mm radiator (9x120mm fans connect to this on just one side)

1x OCZ 120GB Vertex 2 SSD

1x 2TB Samsung F4

2x GTX 480's (I'm intending to replace these with two 4GB Kepler GPU's later on)

2x EK GTX 480 Water Blocks (Transparent acrylic Top with Nickel Plated Copper Bottoms)

1x Danger Den Acrylic Reservoir

1x Scythe KAZE MASTER Pro Fan Controller

2x Litres of EK Blood Red Coolant (I only actually need 900ml of this to fill the loop completely)

Now I've already built the system so this log won't span multiple days I'm just going to post the images here. The pics aren't that great because I only used my phone to take them.

First thing first. Cables. I ordered the Corsair aftermarket cables for my power supply they are single braided cables and look really great. These are not extension cables but direct replacements for the cables that come with the power supply. If you've not seen an AX series Corsair PSU every cable is modular including the main 24-Pin.

wAcpQ.jpg

DHOJM.jpg

zGqAu.jpg

Next came my CPU Block, this is the EK-Supreme LTX which is a really excellent block and at a bargain price too.

WUBAS.jpg

VeJbE.jpg

vP1u5.jpg

AwTuM.jpg

4Dcpr.jpg

Here is some of the Blood Red coolant I ordered, It looks a lot redder inside the loop as you will see further down.

OO84p.jpg

Here is the 3930K CPU. This is a 6 Core / 12 Thread / 12MB L3 Cache / 3.30GHz unlocked processor. In the short time I messed with it I was able to reach 4.8GHz with only a slight voltage increase. I believe 5.0GHz will be stable on this system 24.7 with more time.

TuItz.jpg

scnq0.jpg

And here is the heart of the build for me, the Asus Rampage IV Extreme. In my opinion this is the best LGA 2011 X79 motherboard on the market currently and if you've seen any reviews of the board you'll know why. In short it has every feature imaginable for all users. 64GB RAM support, Quad-SLI, Sub-zero overclocking features. You name it, its got it. Of course the price reflects it as it is the most expensive X79 board too. Oh and yes this is a BF3 branded product which is where the Serial Code for my BF3 giveaway came from.

hSRpW.jpg

5jLNK.jpg

bKo6i.jpg

W8SF3.jpg

1YaOb.jpg

VGsv9.jpg

mOfu2.jpg

Now the Graphics Cards. Since I took these pictures the other year for my old build (And I took those with my DSLR) I decided to merely re-use those pictures again, they are using EK GTX 480 blocks:

cfGee.jpg

Continued on Post 2 due to limitations on how many images can be posted per post.

Link to comment
https://www.neowin.net/forum/topic/1067046-water-cooled-build-log-pics/
Share on other sites

Similarly to the GPU's I used the same Reservoir from my old build in this one so here are a few pics I took of that a few years ago:

sQS1P.jpg

9YO7h.jpg

uvc0u.jpg

Now comes time to build it. Something to keep in mind is my case has no room behind the motherboard tray to hide cables. The case is split up in to three sections with the PSU in the top, Six hot-swappable drive bays in the bottom and the Motherboard in the centre. The clearance between the door and the back of the motherboard tray is less than 2mm's meaning no cables will fit behind and they all must unfortunately dangle down through the Motherboard compartment. This can make cable management a real bitch but I do love the external aesthetics of this case and do not want to change it.

eZOl0.jpg

Now I've put coolant in, this is about 900ml of coolant so not quite one bottle of the EK Blood Red. The pump is actually on in this image (but the rest of the system is not) and I am doing a basic leak test. The result of this test was good as there was no leaks at all.

rfLNG.jpg

1R3j8.jpg

And here is a picture of the pump I'm using. It is very quiet and has quite good flow.

VBX5L.jpg

Just to explain why there are no radiators and where the pipes are going in the above pictures. There is a large external radiator off to the side which sits underneath my desk when the system is on the floor. I use Koolance Quick Disconnects to connect and disconnect that radiator as needed for moving the case.

You may have noticed in the build log that there are no pictures of the Mushkin 32GB RAM. That is because Aria.co.uk which is where I ordered them from simply have no stock. I ordered them about 10 days ago now and they have still not got any in stock. They have reassured me that stock is coming but when that will be I have no idea. I've already paid for them too so this is kind of annoying especially considering how much that memory cost. To tide me over until it comes I'm using 8GB of OCZ Memory which I had laying around but this is quite slow memory and it needs a ton of volts. More to the point it doesn't look as nice. This is what the Mushkin Memory looks like:

lEuq2.png

I'll take pictures of the whole thing completely finished once the memory arrives and post those here too. I hope you enjoyed this look at my build feel free to ask any questions.

Very, very nice setup. (Y)

Mind sharing the grand total for this build? lol

Well I didn't buy all the parts at once so the prices aren't all going to be reflective of todays prices but..

?660 on GPU's (?330 each at time of purchase)

?440 on CPU

?330 on Case

?310 on Motherboard

?220 on the PSU

?200 on RAM

?170 on OCZ SSD (at time of purchase, it's much much cheaper now)

?140 on GPU Blocks

?100 on Logitech Dinovo Edge Keyboard

?100 on Razer Mamba Mouse

?90 on 2TB Samsung Hard Disk

?80 on the External Radiator

?70 on Case Window

?70 on Pump + XSPC Pump Top

?70 on all the fittings

?60 on Bluray Optical Drive

?55 on Corsair HS-1 Headset

?50 on External Radiator Fans (9x120mm)

?40 on Phobya RGB LED Kit + Remote

?30 on the CPU Block

?30 on Internal Fans (4x140mm)

?20 on the External Radiator Stand

?12 on two bottles of EK Coolant

?7 on ClearFlex tubing

The only things I've not included in this list are my displays. I'm using three 30" Dell displays. Two 3007WFP-HC's and one 3008WFP. I paid ?810 for one ?550 for another and ?790 for the other.

Total of just the tower: ?3,099

Total of Tower + Mouse/KB/Headset: ?3358

Total of Tower + Mouse/KB/Headset/Displays: ?5,504

One other cost I didn't include was the arms that suspend my displays. If I add those in it adds another ?342 bringing the absolute total to ?5,846 :cry:

Very nice, I love the red and black :D

Damn that's $9,200 in USD :|

Indeed a lot of money. But you know what if I had to sell this computer and got that exact amount for it (talking hypothetically) I'd just build the whole thing again using almost the same parts. I think the only thing I'd change would be the graphics cards as I intend to upgrade those anyway. The rest I'm pretty happy with.

Very nice. What kind of temps do you get on your CPU? I wanted to water cool, but I'm perfectly happy with what I have. I get anywhere from 18c to 25c idle on my i7 860, and 55-65c under full load.

At Idle with everything at stock clocks I get 27c-29c on all the cores on my 3930K and 29c on my GTX 480's - At load (Prime95, Small FFT's) I get 50c on the CPU after an hour. On the GPU's running games they go to about 55c maximum with the 2nd card in the loop being 1c higher.

Overclocked with the 3930K at 4.8GHz it gets to 60c under load with Prime95.

The system is completely and utterly silent and when I say silent I mean if there wasn't lights on it I wouldn't be able to tell if it was on or not. It makes no noise at all all the 9x120 fans on my radiator are very quiet ones that operate at 16db at full speed but I have them at half that speed which makes them completely inaudible from anywhere in the room. I do the same with the 4x140mm fans inside the case and the AX1200 PSU stays at its idle fan speed until you cross over 600 Watts of load which this rig doesn't.

Looks amazing. Although you appear to have got a bargain on the case at ?330 quid with a side window, Scan are currently asking for ?460 notes for that combo.

I hope you really enjoy it.

I got the Case and Side Window back in 2009. Back then the case retailed for ?330 and the Side Window was ?70 so in total I paid ?400 for it. I got the case from Scan actually and I got the Side Window from KustomPCS.co.uk as no one else in the UK stocked it.

Good God man!

I'd actually just want the motherboard for it's RAM support to be honest... but please do consider joining the Neowin Folding@Home group once you have this up and running, or even just for a stress test.

I'd imagine you bringing in about what the rest of us 20ish people total bring in daily.

It is a lot of fun, I mean it isn't cost effective. You'd find it cheaper to just slap a fan on that RAID card. But for me I enjoy this as a hobby it's fun to do and if I was in your situation I'd definitely slap a heatsink on to a raid card.

I'd recommend using a generic chipset block as they will fit very tiny processors and have adjustable mounting arms that will allow it to bolt down on your card regardless of where the screw holes around the processor are. Shouldn't cause too much strain on the card either if you're careful. I've seen a water cooled RAID card before in a build online so it can be done.

I was originally driven to water cooling my entire system (instead of just the CPU) when I got my GTX 480's in 2010. They were so bloody loud it was either sell them or water cool them. I didn't want to step down to a slower card (at that time they were the fastest) so I shelled out for the water blocks instead and expanded my setup.

Good God man!

I'd actually just want the motherboard for it's RAM support to be honest... but please do consider joining the Neowin Folding@Home group once you have this up and running, or even just for a stress test.

I'd imagine you bringing in about what the rest of us 20ish people total bring in daily.

I used to fold a long long time ago, in 2003! - But I don't anymore the electricity costs are just too high.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • If you can't spell a simple word that 2nd graders learn, your entire argument is suspect.
    • And here goes the "Won't someone think of the children" brigade. Get stuffed mate. This has NOTHING to do with making the internet safe. It's about tracking adults, spying on your online activity, and sending the boys around when they don't like something you post. Also, again, parliament have voted TWICE against this, and Starmer is going ahead anyway. THAT is anti-democratic bullsh**. They will use this law to track you, they will use this law to control you, and they will use this law to punish you if they don't like what you do, even if it's legal. And your data? Say bye bye to that. It'll be on the darkweb in weeks. I'm not some rando online. I've been an IT professional for 40 years, many of it in security. I know exactly what this means and what will happen to your data. I do not consent and I will not comply.
    • "...but it may not be Microsoft's fault" seems like a reasonable way to tease what is going on without leaving the user with a false impression that an update is the problem. A title isn't a summery, it is meant to entice the user to read the article. It should not contain a misleading premise; which this title does not. You could maybe complain that the first paragraph should have included that detail. The writing style popularized over 100 years ago in newspapers will cover the most important information as soon as possible with details and nuance added later; the idea being that with each new paragraph you have less of the reader's focus.
    • Samsung Galaxy XR arrives in the UK with new AI and enterprise features by Fiza Ali Samsung is bringing its Galaxy XR headset to the UK several months after the device made its debut as the first headset built on Google's Android XR platform. The headset was first teased in late 2024 alongside Google's introduction of Android XR before making its commercial debut in 2025. Developed in collaboration with Google and Qualcomm, Galaxy XR combines mixed reality experiences with Gemini-powered AI features, allowing users to interact with digital content using voice, gestures, and visual inputs. While the hardware itself remains largely unchanged from the version Samsung unveiled last year, the company is using the UK launch to spotlight several software enhancements that have arrived through recent updates. Among the most notable additions is deeper integration with Google's ecosystem. Galaxy XR users can explore destinations through Google Maps' Immersive View, receiving AI-powered recommendations and contextual information from Gemini while navigating virtual environments. Furthermore, entertainment experiences have also expanded; users can watch 180-degree and 360-degree videos on YouTube, browse spatial content converted into 3D, and ask Gemini questions about on-screen content without interrupting playback. Samsung is also highlighting mixed-reality features such as Circle to Search, which allows users to identify real-world objects through hand gestures while using the headset's video pass-through mode. Another feature automatically converts photos and videos into spatial 3D experiences. Moreover, the headset now also supports Android Enterprise, allowing organisations to manage deployments using existing Android management tools. Annika Bizon, Vice President, Product and Marketing, Mobile Experience, Samsung UK & Ireland, talked about the device, stating: The headset is powered by Qualcomm's Snapdragon XR2+ Gen 2 platform and features dual 4K Micro-OLED displays. The tech giant says that users can expect up to 2.5 hours of battery life. Samsung also confirmed that Galaxy XR will continue receiving software and security updates as the company works alongside Google and Qualcomm to expand the Android XR ecosystem. Galaxy XR is now available for pre-order and will go on sale on 8 July. Customers interested in trying the headset before launch can visit Samsung KX in London and selected Samsung Experience Stores from 17 June. Finally, the company will also host a livestream on 19 June showcasing the headset's capabilities and answering questions from prospective customers.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      91
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!