Audio jack extender on iMac?


Recommended Posts

I wanted to add a little 3-6 inch cable to extend my audio jack on the back of my iMac so I don't have to turn the computer around when ever I plug head phones in.

But then I started to think... if there's a little cable plugged in (but no headphones plugged into the extender), will the hardware recognize this and still play audio through the built-in speakers?

Link to comment
https://www.neowin.net/forum/topic/1070947-audio-jack-extender-on-imac/
Share on other sites

I haven't verified this, but if there's an extender plugged in, the iMac will probably assume that headphones are plugged in and not play sound through the built-in speakers.

Nik has a good point though. I'm not exactly sure how an extender does its job, and it might even vary from extender to extender.

I wanted to add a little 3-6 inch cable to extend my audio jack on the back of my iMac so I don't have to turn the computer around when ever I plug head phones in.

But then I started to think... if there's a little cable plugged in (but no headphones plugged into the extender), will the hardware recognize this and still play audio through the built-in speakers?

Not the cheapest solution: You can if you use a USB DAC headphone amplifier.

This way you can even leave the headphones plugged in the DAC at all time. You only need to choose your output device from the volume icon in the menu bar.

[option + click] on the volume icon.

post-55766-0-87092800-1334683718.png

If it's any help, I have a 3.5mm to 3.5mm cable which I use to connect my macbook pro to my amp. When I unplug the end connected to the amp the sound dies until I unplug it from the mac at which point the sound starts to come from the mac.

Not the cheapest solution: You can if you use a USB DAC headphone amplifier.

This way you can even leave the headphones plugged in the DAC at all time. You only need to choose your output device from the volume icon in the menu bar.

[option + click] on the volume icon.

That's a good point, but 1.) I need a few extra inches on my headphones and 2.) I take them with me, so I wanted to solve the accessibility issue of having to constantly unplug/plugin the headphones.

An extender should just extend, nothing more!

The connectors are not connected to each other as they would be if a headphone were plugged in (completing the circuit).

Ah, also a good point.

---

I'll report back here if I do buy something.

It completely depends on how they detect it. My laptop (Sony Vaio Z) detects extension cables without anything actually connected just like it detects headphones. Which means it just detects if there is something plugged in the port, not if a circuit is completed. I suspect most computers work that way.

Not the cheapest solution: You can if you use a USB DAC headphone amplifier.

This way you can even leave the headphones plugged in the DAC at all time. You only need to choose your output device from the volume icon in the menu bar.

[option + click] on the volume icon.

So the image you've attached... I can't actually find where that setting is. I'm on 10.7.3 at work (and 10.6.something at home).

So the image you've attached... I can't actually find where that setting is. I'm on 10.7.3 at work (and 10.6.something at home).

You can find it in the menubar like Elliott said.

That's a good point, but 1.) I need a few extra inches on my headphones and 2.) I take them with me, so I wanted to solve the accessibility issue of having to constantly unplug/plugin the headphones.

You can place the DAC on your desk which solves both 1.) And 2.)

The way all audio detection cables work these days is they have 5 connections on the bottom, one for L, one for R and one for Ground. Ground is always connected, but L and R are on flexible pieces of metal, when you push a headphone jack in, it stops them from touching the other 2 points on the connector (which go to the internal sound) and the sound instead flows out onto the headphone jack cable.

I'm almost certain that audio will be cut from the built-in speakers whenever ANYTHING is plugged into the audio out jack. Remember, that headphone jack is more than a headphone jack, it's also an optical connector. Optical cables don't carry a current and would never complete an electrical circuit. So, I'm pretty sure that the built-in speakers are cut out whenever anything is plugged in there.

So wait... on a Mac you can't just select where you want the sound to come from?

Those screenshots show that you can.

Or do you mean when you aren't using another sound card? My laptop (HP EliteBook 2740p) technically can switch output but the drivers are configured in a way that if the speakers are default and headphones are plugged in, sound comes out of the headphones. Macs probably work like this, too. I can have two separate audio streams if I play one to speakers and one to headphones, but if I choose to only play to one device, it will come out of the headphones no matter what I choose. Modified drivers may change the behavior.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Given only Volume license customers and specific resellers can obtain the LTSC versions legitimately it seems likely that this has been tinkered with quite a lot!
    • Apple CEO Tim Cook confirms looming price hikes due to memory shortages by Hamid Ganji Image via Apple Memory and chip shortages have led to significant price increases for electronics over the past year, and it seems that more hikes are on the way for upcoming smartphones and computers. Apple CEO Tim Cook has confirmed that the company is planning to increase the prices of some of its products due to the ongoing memory and storage shortages. In an interview with The Wall Street Journal, Cook confirmed the looming price hikes for Apple’s future products, adding that “Unfortunately, price increases are unavoidable.” He also said the company is doing its best to “mitigate the huge increases that are being passed to us, and we’ve been trying to shield our customers from the increases, but the situation has become unsustainable.” The Apple CEO also noted that the allocation of a large portion of memory chips to AI companies has contributed to shortages in the market, resulting in lower supply at a time when demand for devices remains high. “We definitely need memory pricing and supply to return to reasonable levels for consumer products. That’s the bottom line,” Cook said. Cook also added that Apple is ready to use its vast cash reserves to help boost supply in the market because additional production capacity is needed. While he declined to specify how Apple plans to do that, he said the company will not build its own memory and storage factories despite its financial resources and silicon expertise. Cook did not provide further details on the scale of the price increases or which Apple products would be affected, though iPads and Macs could see higher prices sooner than other products. Apple’s next product launch event is scheduled for September, when the company is expected to unveil the iPhone 18 Pro, iPhone 18 Pro Max, and its first foldable iPhone. It remains unclear whether the upcoming iPhones will be affected by the price increases, but given the current memory shortage, higher prices seem increasingly likely. There is currently no clear timeline for the end of the memory shortage. Samsung, one of the world’s three largest memory chip manufacturers, recently said the shortage could persist for several more years.
    • Downloads does not equal actual usage, even less when the app is pre-installed in some Galaxy phones.
    • +1000 to this, don't understand why they added that margin around the top bar, even the close button is a PITA to click without aiming. Ofc, this is just preview and hopefully they will revert such odd UX decision before hitting final version.
    • so the people who bought this will get a refund?
  • Recent Achievements

    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      167
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      Steven P.
      64
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!