Discussion for AMD CPU/APU owners


Recommended Posts

Also, PRICE!

Cheapest FX AMD Motherboard, Ram + CPU vs Similar Priced Intel Motherboard, Ram + CPU. (i3)

GIGABYTE GA-970A-DS3 AMD 970A (Socket AM3+) DDR3 PCI-Express ATX Motherboard ? 44.99

AMD Bulldozer FX-4100 3.60GHz (3.80GHz Turbo) Socket AM3+ 4-Core Processor ? 70.79

8GB Exceleram Value Series (1x8GB) DDR3 PC3-10666C9 1333MHz 1.5v SODIMM Memory - E30804S ? 27.99

?172.52 w/VAT

Intel Core i3-2100 3.10GHz (Sandybridge) Socket LGA1155 Processor - Retail ? 69.95

MSI Z68A-G43-G3 Intel Z68 (REV B3) Socket 1155 DDR3 PCI-Express Motherboard ? 59.99

8GB Exceleram Value Series (1x8GB) DDR3 PC3-10666C9 1333MHz 1.5v SODIMM Memory - E30804S ? 27.99

?189.52 w/VAT

FX-4100 is a quad-core, 3.60GHz processor. The i3-2100 is a dual core, 3.10Ghz processor.

In passmark benchmarks, the i3 scores 3851 points and the FX scores 3988 points. The FX-4100 system is also ?17 cheaper.

And the best bit is LINUX BENCHMARKS :p.

embed.php?i=1110171-AR-BULLDOZER86&sha=830ac33&p=2

embed.php?i=1110171-AR-BULLDOZER86&sha=7729929&p=2

embed.php?i=1110171-AR-BULLDOZER86&sha=42f98cd&p=2

WINDOWS

DiRT3%206850.png

DiRT3%20B%205570.png

Intel_VS_AMD.png

AMD_4100_Cinebench.png

This is all without the Bulldozer Patch that will hopefully increase the gap :)

Intel fanboys bashing amd, nothing new indeed... but they are indeed very mad because ivy bridge line up turned to be not quite good... and they can't even overclock because it heats like hell. To bad for them.

Really? Whatever the scenario? I got alot of results that say otherweise. As soon as it comes to multithreading AMD's FX will pull ahead, I'm not even going to talk about Linux benchmarks as thats a different story, FX has a whole new life over there.

Whoever was comparing IB to FX (Currently bulldozer) should look up when BD was release and when was IB released.

Anyway to the people who plan to buy Piledriver, there are some big changes.

Quad-channel DDR3

Up to 10 cores

HT

Dynamic scheduling and speculative execution

8 CUs with two cores per a CU.

AMD released a software optimization guide for Piledriver in January. You can read more about it here.

http://support.amd.c...w_opt_guide.pdf

That PDF you linked to is not what you think it is. It's a very technical rundown of architecture improvements(not specs). It's covering things like fetch-decode optimizations. That's a good thing though. Things like quad channel and 16-cores are nice back of the box features, especially for high end buyers, but architecture improvements is really what AMD needs to do now and it's something every consumer is going to benefit from. I mean, if you throw in an extra 2 Bulldozer cores that's going to help you boost performance when every other core becomes saturated, but if you manage to shave .0001 billionth of a second off of fetch-decode, that's time off of every single operation executing and that adds up to large performance gains.

From my understanding AMD is starting to focus its attention on the low end/portable market. Hopefully they take some of the optimizations they make there and translate them in to performance on the high end.

Anyway, I'm hoping AMD starts leveraging their APU line into their high end in their second Bulldozers. GPGPU is starting to become a big thing and having the GPU and CPU on the same chip could really be leveraged into something big.

That PDF you linked to is not what you think it is. It's a very technical rundown of architecture improvements(not specs). It's covering things like fetch-decode optimizations. That's a good thing though. Things like quad channel and 16-cores are nice back of the box features, especially for high end buyers, but architecture improvements is really what AMD needs to do now and it's something every consumer is going to benefit from. I mean, if you throw in an extra 2 Bulldozer cores that's going to help you boost performance when every other core becomes saturated, but if you manage to shave .0001 billionth of a second off of fetch-decode, that's time off of every single operation executing and that adds up to large performance gains.

From my understanding AMD is starting to focus its attention on the low end/portable market. Hopefully they take some of the optimizations they make there and translate them in to performance on the high end.

Anyway, I'm hoping AMD starts leveraging their APU line into their high end in their second Bulldozers. GPGPU is starting to become a big thing and having the GPU and CPU on the same chip could really be leveraged into something big.

Actually I do know exactly what that .pdf is about. I also know that major architectual changes come in Steamroller in 2013. But its good to know that they are atleast doing some changes in some levels with PD to keep up.

Got this from Legitreviews review of the i7-3770k and Techspot's review of the Core i7 3770k You should compare whatever is the latest/greatest from Intel with whatever is the latest/greatest from AMD

No, you should compare at similar price points. It's about what you can get for X amount of money. We aren't all premium buyers. Just becuase Honda released a new Civic within a week of a new Shelby GT from Ford doesn't mean the two should be directly compared.

Edit: Ever since I started working in the automotive industry everything has become car analogies...

I'm going to be buying an FX chip here soon. I think I'll get a good 6 core. I don't think I need an 8 core.

I suggest wait for Piledriver in Q3 if you're not in a hurry. As much as I've heard they are going to fix somewhat the glitches in Bulldozer. Or go with an Trinity APU, they seem to be good :)

Edit: Q3 - Well they are hoping to release it in that timeframe but might take longer, we all know how long we had to wait for BD :D

I suggest wait for Piledriver in Q3 if you're not in a hurry. As much as I've heard they are going to fix somewhat the glitches in Bulldozer.

If you have an AM2+ slot processor you can upgrade to an AM3+ board and transfer the processor over in preparation. Of course, I tried that and my Phenom didn't want to let go of the heatsink :cry:

You should compare whatever is the latest/greatest from Intel with whatever is the latest/greatest from AMD - these are recently released CPU's from both companies. What more do you want

What about price? If you want to compare apple-to-apple, you should include the price. So, check the current price of the AMD FX CPU, find a comparable Intel CPU and check the performance.

What about price? If you want to compare apple-to-apple, you should include the price. So, check the current price of the AMD FX CPU, find a comparable Intel CPU and check the performance.

Sure. 8150 = 2500k/2600k

There you go.

*Newegg prices. In Estonia both Intels are even more expensive.

Eh let me refrase myself. In Estonia the 8150 is 198$ whereas the 2500k is 230 :)

I was tied between a FX series and a 2500k, the late release of the FX is one reason I decided to go with the 2500k. I do mostly gaming, which the 2500k is faster in most of the time. I also do Encoding/encoding of HD video which most of the time the FX 8150 is faster in but i do more games then anything else. It comes down to buying what you want and whatever makes you happy.

Also, comparison should be done by price not flagship status etc.

First of all, 3770k is a newer CPU then Bulldozer is so I can't understand why do you keep comparing them?

Because they're both the newest and greatest from their respective manufacturers. It's not the consumer's problem if AMD hasn't updated their line for a while.
Secondly.
SPECviewperf is a synthetic performance benchmark tool. C-Ray is a synthetic performance benchmark tool. SiSoft Sandra 2011 is a synthetic performance benchmark tool. Anandtech's "7-zip benchmark" is a synthetic performance test. The only real-world test you've provided is Adobe Photoshop, where FX performed a whopping 12% faster than previous-generation i7. You also didn't mention that for every one of these, there were 10 others where FX was much slower, including in heavily threaded scenarios. So your claim that FX does better in multi-threaded scenarios is bogus.
I love the fact that when ever FX is better in a benchmark it will be labled syntetic instantly but untill then its the most widley used benchmark. Typical.
The usefulness of a CPU comes from its performance in real-world application, not synthetic benchmarks. That a benchmark is used widely doesn't make it any more indicative of real-world performance.

Because they're both the newest and greatest from their respective manufacturers. It's not the consumer's problem if AMD hasn't updated their line for a while.

SPECviewperf is a synthetic performance benchmark tool. C-Ray is a synthetic performance benchmark tool. SiSoft Sandra 2011 is a synthetic performance benchmark tool. Anandtech's "7-zip benchmark" is a synthetic performance test. The only real-world test you've provided is Adobe Photoshop, where FX performed a whopping 12% faster than previous-generation i7. You also didn't mention that for every one of these, there were 10 others where FX was much slower, including in heavily threaded scenarios. So your claim that FX does better in multi-threaded scenarios is bogus.

The usefulness of a CPU comes from its performance in real-world application, not synthetic benchmarks. That a benchmark is used widely doesn't make it any more indicative of real-world performance.

LOL! Do you even know how many people laughed at this?

You more or less labeled 3 of the biggest benchmarks in the world as usless just because your fanbois is too strong, jesus. This s*it is getting hilarious.

Like previously stated, you don't compare CPU's by their "flagship" status, by that logic maybe we should compare something from VIA with 3770k?

You more or less labeled 3 of the biggest benchmarks in the world as usless just because your fanbois is too strong, jesus. This s*it is getting hilarious.
Unless what you plan on doing with your CPU is run synthetic benchmarks all day and salivate at the results, basing a purchase on synthetic performance doesn't make sense.
Like previously stated, you don't compare CPU's by their "flagship" status, by that logic maybe we should compare something from VIA with 3770k?
Well... yes you do. The consumer chooses the best CPU for the price. He doesn't care when they were released. Again, if AMD didn't update their line in a while, it's their problem, not the consumer's.

Unless what you plan on doing with your CPU is run synthetic benchmarks all day and salivate at the results, basing a purchase on synthetic performance doesn't make sense.

Well... yes you do. The consumer chooses the best CPU for the price. He doesn't care when they were released. Again, if AMD didn't update their line in a while, it's their problem, not the consumer's.

Indeed, you choose by the price where the FX series (lower then 8150 or not,doesn't really matter) wins over Intel, and that few % of a change you get in Photoshop doesn't really count does it now.

Also like I said before, by your logic please get an VIA C7, it's cheap and for that money good enough of an CPU. See the flaw in that?

Anyway I'm done arguing about whos better in what and where. Not really the topic I was hoping this would be :(

Indeed, you choose by the price where the FX series (lower then 8150 or not,doesn't really matter) wins over Intel, and that few % of a change you get in Photoshop doesn't really count does it now.

Agreed, the question is, where does FX win for the price in real-world performance?

I will agree on that in single-threaded apps it takes an ass-beating from the i-series but I'll stand my ground that in Multi-tasking FX is better.

I use C4D and AE, in those programs it's better then the 2500k as I had an machine to compare it with. Is that real world performance enough for you?

Anyway as I'm at work I should actually do some :rofl:

Back in October 2011, I picked up an AMD 999FX Sabertooth board from ASUS in preparation to upgrade mine or my brothers system to the new FX-8150 (I have a i7 920 - OC to 3.6, he has a Phenom II 956 BE - OC to 3.5). Unfortunately I ended not going with any of the new FX chips, mainly because their single threaded performance was worse than AMD's prior Phenom II generation of chips. It was also not any faster then my OC'd i7 920.

I admit I was disappointed with the FX launch, it was way over hyped and set very high expectations. However the chips are priced reasonably and they offer a tremendous value for gamers. If you look purely at the gaming benchmarks, you will see that Phenom II (AMDK10), Sandy Bridge, and Bulldozer all are virtually even in most games.

Right now you're choices for gaming (not including the new Ivy Bridge) are Phenom II X4 980, i5 2500k, or FX-4170.

Other that I don't consider the FX-4170 a quad core, I think it would be the best choice for gamers on a budget.

I will agree on that in single-threaded apps it takes an ass-beating from the i-series but I'll stand my ground that in Multi-tasking FX is better.

I know you're all talking strictly about performance and yes the FX-8150 has the advantage in some scenarios, price is now ok too. But when I buy a CPU I look at every aspect and where AMD loses horribly is the power consumption, an area where Intel excels nowadays, especially with Ivy Bridge. Was the other way around a few years ago and unfortunately it shows that while Intel has a lot of headroom left if they need it AMDs processors are working at their limits. Not a good sign for the near future.

i bough myself a fx8120 today (almost the 8150), i thought it was a bargain @ ?128, i looked up what a nice intel cpu would set me back and while lntel does have a great performing cpu lineup i just coudlnt justify the price for intel as you only get 10-15% performance, sometimes abit more, sometimes abit less, depends what ya wanna do, but you gotta pay 60% more for the I7 2600k and about 30% more for a I5 2500k its just not woth it for half a frame here 2 seconds there( when ya doing 100fps+ does 1 more really matter), i just felt that amd offered the best bang for buck as they did with the phenon II, intel cpus are good and are better but not better enough and not by enough for me to buy one. but thats just me.

3 2 1 cue fur flying

This topic is now closed to further replies.
  • Posts

    • This is what I want. Hey Gemini, how do I remove you from all my google products permanently?
    • I would never install install this build before rtm process. only 3 months to go. never install on your daily devices. just wait 3 months.
    • Motrix Next 3.9.6 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.6 changelog: New Features Clipboard management — App-owned copy actions no longer trigger the Add Task auto-detect popup. aria2 input compatibility — Multi-line aria2-style task input is supported for URLs with per-task options such as out=. BitTorrent IPv6 DHT — Added IPv6 DHT support and related configuration. File category URL patterns — File category rules can match URL patterns with validation and localized hints. Task status tags — Added clearer waiting and sharing states for task cards. Download event bridge — Added an aria2 WebSocket event bridge for faster download notifications. Improvements Improved task list transitions and preserved task state during tab switches. Kept RPC origin access enabled for local integrations. Restored AppImage stripping in release builds after beta validation. Added localized preference guidance across supported languages. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Segra 1.6.2 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.2 changelog: UI: Improved the transition from the loading skeleton to the real content card. Security: Added Segra.dll code signing and automatic VirusTotal upload. Settings: Fixed the settings header to highlight Account when scrolled to the top. Recording: Updated OBSKit.NET to 1.4.1. Download: Segra 1.6.2 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hey Google, these are the Gemini features I want in 2026 by Aditya Tiwari Google Gemini has been around for over three years. The AI chatbot started its journey back in 2023 (as Bard) when ChatGPT was already a talk of the town. However, it quickly attracted criticism after misrepresenting facts about the James Webb Space Telescope. The search giant spent a year fine-tuning Bard before rebranding the chatbot and its underlying generative AI model to Gemini, drawing inspiration from NASA's first human spaceflight program. Note that Bard was initially powered by LaMDA and PaLM 2; Google has since added several new features and integrations to Gemini. That said, there is scope for improvement and a gap for new features. I have been using Gemini for a while now and have realized that the chatbot lacks several features, making it harder for me to research across topics. These are mostly function-over-form updates that can improve the overall experience. Delete individual messages from a conversation Image via DepositPhotos.com One good thing about Gemini is that it can maintain context throughout the conversation. But things might get chaotic when you want to ask a related question, but don't want it to be part of your conversation in the long run. You can't ask that related question in a fresh chat because Gemini will lose the active conversation context of what you're trying to research. If Google allowed you to delete individual question/answer pairs, you could simply ask about a sub-topic and remove it from the conversation to create a smooth flow of important stuff. Offline mode Image via DepositPhotos.com A big pain of using Gemini daily is that everything loads from the cloud. It takes time for your chats to appear, and you can't view your conversation history while offline. To get a better idea, you can open the Gemini app and see how it looks without an internet connection. While Gemini models run in the cloud, it wouldn't hurt if Google could store chats (at least the text part) on the device so we can refer to them when offline. Google can also offer a lightweight version of its AI model to help with basic drafting, summarization, and other tasks. It has the Gemini Nano model, which can perform on-device processing on Google Pixel, Samsung, and some other Android brands, but it's a system feature and not related to the cloud-based Gemini app. Make temporary chats permanent I can't thank Google enough for taking the time and effort to add incognito mode or temporary chat mode to the Gemini app. It lets you have conversations without worrying that the topics will end up in your chat history or used for model training (at least on paper). Google claims that it doesn't use your temporary chats to "personalize your Gemini experience or train Google’s AI models." However, the data is stored "up to 72 hours to respond to you and to process any feedback you choose to provide." That said, I often start researching something in a temporary chat, only to realize the chatbot's answer is good enough to refer to later. Sadly, Gemini doesn't have an option to make such temporary chats permanent. In other words, I won't be able to follow up on it if I close the temporary chat. I'm left with alternatives like copying the answers into notes or another app. My digital life will get a lot better if Gemini gets a button to make temporary chats permanent. Collapse answers for a cleaner view You're heavily invested in your research game and suddenly feel the need to go up in the chat to recall something. This is when the conversation thread starts to feel like an overwhelming, unending wall of questions and answers. What if Google added a way to collapse Q&A pairs in the Gemini chat thread? It would look quite clean and easy to navigate. You'll quickly get an overview of everything you have discussed with the chatbot. Add buttons to jump between messages Suggested mockup of the feature. This reminds me of a small but useful Gemini feature that Google could add to its chatbot: the ability to hop between prompts in a conversation. Just add simple up- and down-arrow buttons, similar to YouTube Shorts, so people can quickly scroll through the messages. A table of contents or Chat Overview It's hard to get a bird's-eye view of everything you have discussed with the chatbot during a lengthy conversation. This is where a table of contents, or Chat Overview, displayed at the top of the screen, possibly in a drop-down button, might come in handy. You'll be able to get an overview of the chat and jump between messages, serving as an alternative to the up/down arrow buttons. Temporary mode for Gemini Live Image: Google You can use Gemini Live to have real-time conversations with the chatbot, which feels like you're talking to someone in the same room. However, a downside is that Gemini Live doesn't work in Temporary Chat mode, so all your conversations end up in the chat history. Google should consider expanding the temporary chat mode to include Gemini Live. Default to a specific chat One thing that feels somewhat annoying to me is that Gemini always opens in a new chat, whether on web or mobile. Sometimes, you want to return to your last chat. Google can take cues from web browsers, which let you choose whether you want to go to a new tab or a specific web page(s). Gemini can also have options to default to a specific chat when reopened. That said, generative AI chatbots have endless possibilities given the vagueness of their work. You can mold them the way you want by attaching different connectors, adding custom instructions, and including source files. It remains to be seen what Google has in store for future updates and whether anything from this wishlist gets the green light. The search giant released a stream of new Gemini updates in recent months, including Gemini 3.5 Flash and Gemini Omni Spark, adding that it now has 13 products with more than a billion users each. What do you want to see in the Gemini app? Tell us in the comments.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!