Peter Jackson unsurprised by critics of Hobbit footage


Recommended Posts

Director Peter Jackson claims to be unsurprised by the mixed reaction to footage from his long-anticipated film The Hobbit earlier this week.

"It wasn't particularly surprising because it is something new," Jackson told the Hollywood Reporter. But he added: "Ultimately, it is different in a positive way, especially for 3D, especially for epic films." The 3D film has been shot at a rate of 48 frames per second, compared with the industry standard of 24 frames. The 10 minutes of unfinished footage, shown at the CinemaCon convention in Las Vegas last week, was criticised as uncinematic - with some detractors claiming it "looked like a made-for-TV movie".

SOURCE: http://www.bbc.co.uk...t-arts-17885833

The biggest thing i'm annoyed with is the fact that they've made the movie into a two-parter for monetary reason's when the book is tiny. Especially in comparision to the Lord of the Rings. Pfft.

The biggest thing i'm annoyed with is the fact that they've made the movie into a two-parter for monetary reason's when the book is tiny. Especially in comparision to the Lord of the Rings. Pfft.

eh, it's the best outta the books though. i haven't watched the footage. imma go into the movie with a clear mind.

After what Jackson did for the "Un-filmable" LOTR trilogy, you would think people would be giving him the benefit of the doubt, but I guess not. This is going to end up like The Dark Knight Rises with people overhyping it themselves. No matter how excited I am for this movie as soon as it starts my mind is clear and I can only hope it will give me the same feeling as LOTRs did. It doesn't have to be the same, just needs to be good. I think Jackson will make sure of that as he's a huge fan and has all the right people to make this work around him.

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

After what Jackson did for the "Un-filmable" LOTR trilogy, you would think people would be giving him the benefit of the doubt, but I guess not. This is going to end up like The Dark Knight Rises with people overhyping it themselves. No matter how excited I am for this movie as soon as it starts my mind is clear and I can only hope it will give me the same feeling as LOTRs did. It doesn't have to be the same, just needs to be good. I think Jackson will make sure of that as he's a huge fan and has all the right people to make this work around him.

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

You mean mostly disregard the books after the first movie and change the whole story around...

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

you missed the point - people arent complaining about the unedited footage, theyre complaining about the 48fps issue. since humans are so used to 24fps, suddenly 48fps looks terrible. we're not used to it, so it's going to look bad.

You mean mostly disregard the books after the first movie and change the whole story around...

+1

I loved the first film and was amazed by how authentic it was. The others were not nearly as good. I hope he doesn't make the same mistake with The Hobbit :(

I don't really see how Jackson can use the frame-rate of 3D films to support what he's doing with The Hobbit. 3D looks awful.

human eye can detect 48 fps? ... really? ...

Absolutely the human eye can detect the difference between 24 and 48 fps, which is what the article is stating.

Perhaps you need to read this if you feel otherwise.

I'm going to withhold my judgement until I see 48fps 3D myself.

I wonder how they're going to handle this on Blu-Ray. Will they just release it at 24fps, or introduce a new profile for higher fps 1080p. 60fps is only a part of the spec for 720p.

Absolutely the human eye can detect the difference between 24 and 48 fps, which is what the article is stating.

Perhaps you need to read this if you feel otherwise.

You can't really see it as such, but 48 will seem to be sharper

I'm going to withhold my judgement until I see 48fps 3D myself.

I wonder how they're going to handle this on Blu-Ray. Will they just release it at 24fps, or introduce a new profile for higher fps 1080p. 60fps is only a part of the spec for 720p.

and 1080i

The 24 to 48 effect is the same thing that was brought about with running films with smooth motion turned on. TV sets when using this feature give the picture a POP or Soap Opera/Real Life effect. I for one do not use these features. Yes they crisp up the image, but we are so used to seeing 24fps/60fps. I believe eventually the change will be made; we just have to get used to it.

No one likes change. I see the benefits with 3D and sharpness. So unless your watching these films in 3d, I suspect a negative effect.

Artificially created 50/60 fps from 24 is not the same as real 48. It will however indeed look sharper and pop more. The problem is on ever existing non 48 capable systems, you can't just cut every second frame, then it'll appear jerky or like watching a cartoon. So the alternative is to artificially merge or morph every second frame with the next. Which again will create an artificial "feel" to the picture.

It would have worked better with say 96 fps. As merging 4 frames or sub frames not one would create a much better effect than two.

Are people really complaining that a movie will have higher FPS rate than usual, horribly bad, 24?

Thats is like complaining that your FPS game is running at 60 FPS instead of 30.

The trailer does not look like it was filmed at a higher rate, though I'd guess there could be several reasons for that.

Well the trailer footage and the final footage should be the same for fps. It doesn't make sense to have different fps for the trailer itself. If it is filmed at 48fps, everything is at 48fps.

When I go to the movies to watch something in 3D, say Hugo, I loved how the 3D was done but got eye strained with the judder from panning shots and fast scenes. Also even with Avatar I got "tired" of the 3D effect later on in the movie. So what Mr. Jackson has done is solve this issue when seeing something in 3D and making it smoother and easier on the eyes. I'm an observer of this problem since Avatar came up (because of the eye strain) and have high hopes for the Hobbit to solving this issue and really feeling I'm in the Shire. People said it looked too perfect and somewhat fake (Although the AintitcoolNews guy said it wasn't a negative effect on him), but they failed to aknowledge that it was unfinished scenes (some with green screens visible).

Personally I like the smoother effect on my TV, looks more lifelike and vivid and when I watch something else without the effect it just looks dated and can tell the difference more of the slower framerate.

Well the trailer footage and the final footage should be the same for fps. It doesn't make sense to have different fps for the trailer itself. If it is filmed at 48fps, everything is at 48fps.

I'm pretty sure I read somewhere the trailers will all be 24fps, with half the frames missing. Just because it's filmed at 48fps, doesn't mean it will be displayed at that frame rate. I even read some theaters are planning to play the film at 24fps just to avoid complaints. Other theaters are probably incapable of displaying 48fps.

the movie will look smoother ? less cutting frames in fast moving action.

Also whats a challenge is for the CGI team. As more framerates mean more detail and more frames to render an effect and as they will look smoother (sharper) they would have to do a better job at it.

Are people really complaining that a movie will have higher FPS rate than usual, horribly bad, 24?

Thats is like complaining that your FPS game is running at 60 FPS instead of 30.

This is what I would of thoughts, however movies don't seem to lag even at 24FPS. What's the difference between a game running at 60fps and a movie at 60fps? Most games where the fps gets down to 24 or less it can seem very jittery, the higher FPS (before tearing occurs) the better. Why isn't it like that for a movie?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!