Peter Jackson unsurprised by critics of Hobbit footage


Recommended Posts

Director Peter Jackson claims to be unsurprised by the mixed reaction to footage from his long-anticipated film The Hobbit earlier this week.

"It wasn't particularly surprising because it is something new," Jackson told the Hollywood Reporter. But he added: "Ultimately, it is different in a positive way, especially for 3D, especially for epic films." The 3D film has been shot at a rate of 48 frames per second, compared with the industry standard of 24 frames. The 10 minutes of unfinished footage, shown at the CinemaCon convention in Las Vegas last week, was criticised as uncinematic - with some detractors claiming it "looked like a made-for-TV movie".

SOURCE: http://www.bbc.co.uk...t-arts-17885833

The biggest thing i'm annoyed with is the fact that they've made the movie into a two-parter for monetary reason's when the book is tiny. Especially in comparision to the Lord of the Rings. Pfft.

The biggest thing i'm annoyed with is the fact that they've made the movie into a two-parter for monetary reason's when the book is tiny. Especially in comparision to the Lord of the Rings. Pfft.

eh, it's the best outta the books though. i haven't watched the footage. imma go into the movie with a clear mind.

After what Jackson did for the "Un-filmable" LOTR trilogy, you would think people would be giving him the benefit of the doubt, but I guess not. This is going to end up like The Dark Knight Rises with people overhyping it themselves. No matter how excited I am for this movie as soon as it starts my mind is clear and I can only hope it will give me the same feeling as LOTRs did. It doesn't have to be the same, just needs to be good. I think Jackson will make sure of that as he's a huge fan and has all the right people to make this work around him.

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

After what Jackson did for the "Un-filmable" LOTR trilogy, you would think people would be giving him the benefit of the doubt, but I guess not. This is going to end up like The Dark Knight Rises with people overhyping it themselves. No matter how excited I am for this movie as soon as it starts my mind is clear and I can only hope it will give me the same feeling as LOTRs did. It doesn't have to be the same, just needs to be good. I think Jackson will make sure of that as he's a huge fan and has all the right people to make this work around him.

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

You mean mostly disregard the books after the first movie and change the whole story around...

Also, seriously people! Fans are dying for some footage from the movie that we haven't seen. Jackson is nice enough to throw out some unedited footage for the fans and what happens? People complain. IT'S UNEDITED!!!!!!!!

you missed the point - people arent complaining about the unedited footage, theyre complaining about the 48fps issue. since humans are so used to 24fps, suddenly 48fps looks terrible. we're not used to it, so it's going to look bad.

You mean mostly disregard the books after the first movie and change the whole story around...

+1

I loved the first film and was amazed by how authentic it was. The others were not nearly as good. I hope he doesn't make the same mistake with The Hobbit :(

I don't really see how Jackson can use the frame-rate of 3D films to support what he's doing with The Hobbit. 3D looks awful.

human eye can detect 48 fps? ... really? ...

Absolutely the human eye can detect the difference between 24 and 48 fps, which is what the article is stating.

Perhaps you need to read this if you feel otherwise.

I'm going to withhold my judgement until I see 48fps 3D myself.

I wonder how they're going to handle this on Blu-Ray. Will they just release it at 24fps, or introduce a new profile for higher fps 1080p. 60fps is only a part of the spec for 720p.

Absolutely the human eye can detect the difference between 24 and 48 fps, which is what the article is stating.

Perhaps you need to read this if you feel otherwise.

You can't really see it as such, but 48 will seem to be sharper

I'm going to withhold my judgement until I see 48fps 3D myself.

I wonder how they're going to handle this on Blu-Ray. Will they just release it at 24fps, or introduce a new profile for higher fps 1080p. 60fps is only a part of the spec for 720p.

and 1080i

The 24 to 48 effect is the same thing that was brought about with running films with smooth motion turned on. TV sets when using this feature give the picture a POP or Soap Opera/Real Life effect. I for one do not use these features. Yes they crisp up the image, but we are so used to seeing 24fps/60fps. I believe eventually the change will be made; we just have to get used to it.

No one likes change. I see the benefits with 3D and sharpness. So unless your watching these films in 3d, I suspect a negative effect.

Artificially created 50/60 fps from 24 is not the same as real 48. It will however indeed look sharper and pop more. The problem is on ever existing non 48 capable systems, you can't just cut every second frame, then it'll appear jerky or like watching a cartoon. So the alternative is to artificially merge or morph every second frame with the next. Which again will create an artificial "feel" to the picture.

It would have worked better with say 96 fps. As merging 4 frames or sub frames not one would create a much better effect than two.

Are people really complaining that a movie will have higher FPS rate than usual, horribly bad, 24?

Thats is like complaining that your FPS game is running at 60 FPS instead of 30.

The trailer does not look like it was filmed at a higher rate, though I'd guess there could be several reasons for that.

Well the trailer footage and the final footage should be the same for fps. It doesn't make sense to have different fps for the trailer itself. If it is filmed at 48fps, everything is at 48fps.

When I go to the movies to watch something in 3D, say Hugo, I loved how the 3D was done but got eye strained with the judder from panning shots and fast scenes. Also even with Avatar I got "tired" of the 3D effect later on in the movie. So what Mr. Jackson has done is solve this issue when seeing something in 3D and making it smoother and easier on the eyes. I'm an observer of this problem since Avatar came up (because of the eye strain) and have high hopes for the Hobbit to solving this issue and really feeling I'm in the Shire. People said it looked too perfect and somewhat fake (Although the AintitcoolNews guy said it wasn't a negative effect on him), but they failed to aknowledge that it was unfinished scenes (some with green screens visible).

Personally I like the smoother effect on my TV, looks more lifelike and vivid and when I watch something else without the effect it just looks dated and can tell the difference more of the slower framerate.

Well the trailer footage and the final footage should be the same for fps. It doesn't make sense to have different fps for the trailer itself. If it is filmed at 48fps, everything is at 48fps.

I'm pretty sure I read somewhere the trailers will all be 24fps, with half the frames missing. Just because it's filmed at 48fps, doesn't mean it will be displayed at that frame rate. I even read some theaters are planning to play the film at 24fps just to avoid complaints. Other theaters are probably incapable of displaying 48fps.

the movie will look smoother ? less cutting frames in fast moving action.

Also whats a challenge is for the CGI team. As more framerates mean more detail and more frames to render an effect and as they will look smoother (sharper) they would have to do a better job at it.

Are people really complaining that a movie will have higher FPS rate than usual, horribly bad, 24?

Thats is like complaining that your FPS game is running at 60 FPS instead of 30.

This is what I would of thoughts, however movies don't seem to lag even at 24FPS. What's the difference between a game running at 60fps and a movie at 60fps? Most games where the fps gets down to 24 or less it can seem very jittery, the higher FPS (before tearing occurs) the better. Why isn't it like that for a movie?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • They have lots of info on me, I have a facebook account and have done so for years, it was the thing to have then. My phone number is not on it. I don't have the Facebook app on my phone these days, just the messenger part, and only for a couple of people to contact me, most will text me via SMS or phone. I agree, Meta, like others, even without an account will know something about me. Just have to try and keep some things private Also, never saw the need for Whatsapp, people used to ask for me to join it, but as I said to them, I have SMS and a phone, use that, or email
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!