Recommended Posts

Goal: On my MacBook Pro 13 (mid-2010), I want to run both OS X Lion with FileVault protection, and Windows 7 64-bit (Boot Camp) with BitLocker protection.

Dilemma: Limit of four primary partitions.

Story: I have this 13-inch MacBook Pro (mid-2010) which I rarely used. Several months ago I upgraded its hard drive to a Seagate Momentus XT 500GB, and just recently I loaded Windows 7 through Boot Camp. I was impressed with how well Windows 7 ran on the system, and I was even playing fairly recent games at high graphics quality. I decided that I wanted to secure the hard drive data in case I bring the laptop with me when I go on trips. "No problem", I thought. Both Windows 7 and OS X Lion have drive encryption features. I first attempted to enable BitLocker in Windows, and realized that the MacBook didn't have a TPM chip. No big deal though - I'll just enable BitLocker and use a USB drive for authentication. The next issue I ran into was that BitLocker required a separate boot partition, and with a Boot Camp install, Windows loads everything in one partition.

OS X Lion uses three partitions - an EFI partition, the OS X partition, and a recovery partition. "Hmm, I don't really need that recovery partition", I thought. So I removed the recovery partition, enabled BitLocker, and all was well on the Windows side. I was impressed that I didn't really notice any speed difference with BitLocker enabled.

Next step: Enable FileVault. Only problem: Apparently FileVault requires that OS X recovery partition. So now I have a dilemma. I can only encrypt one OS or the other since OS X uses three partitions if you use FileVault, and Windows 7 uses two partitions if you use BitLocker.

Theoretical workarounds: I wonder if I could somehow get Windows 7's two partitions inside of an extended partition. Windows 7 doesn't allow you to install it like this since a logical partition can't be marked as active. But perhaps I could image them into logical partitions, and maybe it could still boot since it's being selected from the OS X boot menu.

Another idea is to have the Windows 7 boot partition on a USB drive (since I need the USB drive for BitLocker anyways). But this does not look promising since I have a USB drive with WinPE on it, and it does not show up in the Apple boot menu.

Any suggestions on this would be appreciated. I know some might suggest using virtualization for Windows, but that's not a good solution if you intend to do some gaming in Windows. Some might suggest using TrueCrypt for the Windows partition. I tried that, but it apparently doesn't work with Boot Camp.

Doesn't Mac's come with the gpt partition table? You can just set the two windoze partitions as "mbr" primary partitions and the OSX ones (including the EFI partition) as gpt primary ones.

The problem here is that when you boot up through Boot Camp, the OS sees the drive as having an MBR partition table. So to Windows, the OS X partitions count as the first three, and you are left with one available.

It's starting to look like this project may be a failure. I tried gathering an image of the Windows boot partition, then recreating it as a logical partition. But that would not show up on the Apple boot menu.

  • 1 year later...

Doesn't Mac's come with the gpt partition table? You can just set the two windoze partitions as "mbr" primary partitions and the OSX ones (including the EFI partition) as gpt primary ones.

 

http://tumblr.tguum.kr/post/9709394290/enabling-bitlocker-with-osx-lions-filevault-activated

^^ the English is rough, and it is presented in a difficult way to understand besides.

 

It appears possibly this guy is manually editing the Hybrid MBR to effect the suggested fix (using GPT for Mac OS Filevault/boot and MBR for Windows Bitlocker/boot).

 

Can anyone read that post?

 

-Matt

This topic is now closed to further replies.
  • Posts

    • Calibre 9.10 by Razvan Serea  Calibre is an open source e-book library management application that enables you to manage your e-book collection, convert e-books between different formats, synchronize with popular e-book reader devices, and read your e-books with the included viewer. It acts as an e-library and also allows for format conversion, news feeds to e-book conversion, as well as e-book reader sync features and an integrated e-book viewer. Calibre's features include: library management; format conversion (all major ebook formats); syncing to e-book reader devices; fetching news from the Web and converting it into ebook form; viewing many different e-book formats, giving you access to your book collection over the internet using just a browser. Calibre 9.10 changelog: New features Content server: A new "modern" interface with a sidebar to ease navigation Content server: When used with HTTPS allow installation as a PWA (Progressive Web App) Edit book: Saved searches: When filtering the list of saved searches match by keywords CSS parsing: Add support for CSS Level 4 selectors Cover grid: When using an image larger than the viewport as a texture scale it to fit the viewport Annotations browser: Allow restricting displayed annotations by custom annotation styles as well Edit book: Compress images: Add option to convert PNG images to JPEG or WEBP Bug fixes E-book viewer: Fix IME on Windows not working when typing in notes for highlights Conversion: Heuristics: Improve performance in some pathological cases SNB Input: Fix error on some input files Windows: fix rare crash when too many notifications are displayed at once Fix duplicating of books not duplicating value from enumerated columns when the column has a default value defined Fix a regression in 9.8 that caused errors from AI plugin providers to be silently swallowed and not displayed to user Fix CSV export invalid when exporting comments field Disallow Python templates when reading book metadata (CVE-2026-53511) Improved news sources The Week Economist Espresso Horizons Download: Calibre 9.10 | Portable | ~200.0 MB (Open Source) Download: Calibre for MacOS | 327.0 MB Download: Calibre for Linux View: Calibre Home Page | Calibre Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Malwarebytes Anti-Malware 5.6.1.257 by Razvan Serea Malwarebytes is a high performance anti-malware application that thoroughly removes even the most advanced malware and spyware. Malwarebytes version 5.**** brings comprehensive protection against today’s threat landscape so that you can finally replace your traditional antivirus. You can finally replace your traditional antivirus, thanks to a innovative and layered approach to prevent malware infections using a healthy combination of proactive and signature-less technologies. While signatures are still effective against threats like potentially unwanted programs, the majority of malware detection events already come from signature-less technologies like Malwarebytes Anti-Exploit and Malwarebytes Anti-Ransomware; that trend will only continue to grow. For many of you, this is something you already know, since over 50% of the users already run Malwarebytes as their sole security software, without any third-party antivirus. What's new in Malwarebytes 5.****: Unified user experience - For the first time, Malwarebytes now provides a consistent experience across all of our desktop and mobile products courtesy of an all new and reimagined user experience powered by a faster and more responsive UI all managed through an intuitive dashboard. Modern security and privacy integrations - Antivirus and ultra-fast VPN come together seamlessly in one easy-to-use solution. Whether you’re looking for a next-gen VPN to secure your online activity, or harnessing the power of Browser Guard to block ad trackers and scam sites, taking charge of your privacy is simple. Trusted Advisor - Empowers you with real-time insights, easy-to-read protection score and expert guidance that puts you in control over your security and privacy. Malwarebytes 5.6.1.257 changelog: Features and improvements Updated the sign-in section of the My Subscription page to clarify that users can activate their subscription by signing in with their Malwarebytes account. Updated the uninstall flow to collect more meaningful insights and address customer concerns. Refreshed the app's tutorial layout for a better look and feel. Issues fixed Fixed an outdated link when clicking Take action after running a Digital Footprint Scan. Miscellaneous bug fixes. Download: Malwarebytes 5.6.1.257 | 472.0 MB (Free, paid upgrade available) Links: Malwarebytes Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yep, not sure where the surprise is here. They release a new model for every phone, every year
    • AI would probably be better utilised replacing Executives than Engineers.
    • RapidRAW 1.5.8 by Razvan Serea RapidRAW is a beautiful, non-destructive, GPU‑accelerated RAW image editor designed for speed and simplicity. It uses a lightweight (~30 MB), efficient code base built with Rust, React and Tauri. Ideal for Lightroom workflows, it offers rich editing tools—exposure, contrast, highlights, shadows, whites/blacks, tone curves, HSL mixer, dehaze, vignetting, film grain, sharpening, clarity and noise reduction—processed in real-time on the GPU. Features include intuitive masking (brush, linear, radial, AI-powered subject and foreground detection), generative edit layers (via ComfyUI), 32‑bit precision, and full RAW format support through rawler. RapidRAW also provides library management (folder navigation, ratings, metadata, EXIF viewer), batch operations, export presets (JPEG/PNG/TIFF), sidecar editing (.rrdata), undo/redo history, customizable UI themes, smooth animations, resizable panels, and preset copy/paste. A modern high-performance Lightroom alternative with polished UX and creative tools, RapidRAW brings powerful photo editing to photographers seeking speed, responsive GPU feedback, and streamlined workflows. RapidRAW v1.5.8 release notes: This release introduces several new editing tools and workflow refinements designed to improve both photo editing and library management. It expands creative flexibility with the addition of a preset intensity slider and a global hue adjustment, while also introducing convenient navigation features such as quick bottom bar filters and folder sorting. Behind the scenes, the update addresses background indexing issues and ensures folder image counts are updated correctly. It also broadens accessibility by adding support for Korean and Traditional Chinese. [full changelog] Download: RapidRAW 1.5.8 | ARM64 | ~20.0 MB (Open Source) View: RapidRAW Home Page | Screenshot | Other operating systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!