TWEAK: Enable HPET (in BIOS and OS) for better performance and FPS


Recommended Posts

Hi guys, I could not resist joining this forum to add my two cents. HPET made me go nutz, too.

 

 

HPET on/off making a significant difference is definitely NOT snake oil.

 

 

On my previous Win 7 build (DAW only), disabling HPET in BIOS & OS resulted in a DPC latency of comfortable 2 - 4 micro seconds. Before that, the latency rarely ever dropped below 130 micro seconds, which already has been quite good regarding the 270 which I?ve had before I got rid of my nvidia card and its crappy drivers.

 

Not only there were no more drop outs (at reasonable buffer sizes), the whole system was much more responsive. The negative result was that my ASIO load meter got more "nervous/sensitive". Means that the meter in Cubase jumped up and down more than before when it was slightly higher but also more stable.

 

I?ve dealt quite a while with the HPET thing and have come to the conclusion, that HPET is neither the "best timer" nor the worst. Computers are not interested in having the timer "ring" every 1000 or 976 or whatever when. They have no personal preference and don?t care about the output. Just about the processing itself. So the important thing is to have as many timers as possible as this means more potential moments to generate interrupts.

 

["...interrupts can be missed if the target time has already passed"]  the wiki link

 

Enabling HPET & using "bcdedit..... true" to force Windows to use only one timer seems absurd. More

 

Just think of it as drinking in a bar where two out of three waitresses have been fired and the one who?s left may be extremely punctual at appearing only once per hour. One of the former waitresses (which meanwhile are unemployed and hungry) could have come your way already 45 minutes after your last beer order. That?s when you were supposed to generate that one interrupt to quench your thirst.

 

I am aware that there has to be some kind of down side to it. Otherwise, nVidia would not set their drivers to strictly induce a latency of 255 micro seconds instead of matching it with the PCI Latency Setting found in BIOS. Maybe this allows a more stable framerate (not a faster one!), like slaves on a galley working their paddles to the decent but steady beat of the drummer. Less strokes, but more load per stroke.

 

While its benefits/disadvantages depend on each single person?s needs, its influence on the computer at the bare system level has to be clearly explainable. There is no place for "every setup is different, so this function does whatever its wants to do", computers don?t work this way.

 

For me, disabling it much more serves my needs as constantly keeps my snake oiled.

 

 

Cheers from Germany

 

'Nuff said.

thread is 2 years old, still not a single proof or evidence that this works.

 

on the contrary, all the claims that this works makes me wonder what's the purpose of deceiving people into this?

thread is 2 years old, still not a single proof or evidence that this works.

 

on the contrary, all the claims that this works makes me wonder what's the purpose of deceiving people into this?

Personally, I think it is just the placebo effect instead of subterfuge in many cases. The wintimertest results are enough to convince folks that it must improve speed objectively everywhere. We aren't immune to such things by any means either. We might defrag an HDD and perceive the same thing to be honest. Tricks of the mind. It's similar to people who listen to uncompressed audio (versus XYZ compressed audio) and claim they can hear a difference, yet double blind studies show otherwise. Expectations are everything, huh?

It's similar to people who listen to uncompressed audio (versus XYZ compressed audio) and claim they can hear a difference, yet double blind studies show otherwise. Expectations are everything, huh?

 

well, i can listen to 128kbps audio file and find differences from the same uncompressed format; 320kbps, not so well. Buy i agree with you, even a defrag can make a subtle difference so this is more a placebo effect then anything.

  • Like 1

well, i can listen to 128kbps audio file and find differences from the same uncompressed format; 320kbps, not so well. Buy i agree with you, even a defrag can make a subtle difference so this is more a placebo effect then anything.

Well 128kbps is the questionable line afaik (or 192kbps -- depending on the compression algorithm). It's the higher bit rates where you can't perceive in double blind tests, yet, people claim otherwise.

Well 128kbps is the questionable line afaik (or 192kbps -- depending on the compression algorithm). It's the higher bit rates where you can't perceive in double blind tests, yet, people claim otherwise.

 

well, considering that when i was learning Java i made a small audio program that i could insert two filters:a low-pass and a high-pass; learned pretty quickly i was going to become deaf more faster then i expected lol

How do I disable it?

Can't find it in my bios....

I have a hp laptop.

Help!

 

You don't, If your computer came with Windows, it's already optimized for the hardware.

But it should be in bios!

Why is it not?

Your laptop is probably too new (pretty sure mine doesn't have it either). The only good reason to have the option in the bios was during the early years when the actual hardware implementations weren't well tested or supported.

Your laptop is probably too new (pretty sure mine doesn't have it either). The only good reason to have the option in the bios was during the early years when the actual hardware implementations weren't well tested or supported.

Do you know any other method that reduces lag and improves gaming?

Do you know any other method that reduces lag and improves gaming?

Well you can still force only HPET in Windows (as was outlined here in the first post) using step 2 if your laptop supports it (you just can't turn it off/on in the bios). Note, I am not saying this will improve your performance (I don't believe it will).

Well you can still force only HPET in Windows (as was outlined here in the first post) using step 2 if your laptop supports it (you just can't turn it off/on in the bios). Note, I am not saying this will improve your performance (I don't believe it will).

Can't find that 2nd step... :(

For many years already my HD never scream.  After turn this on:

bcdedit /set useplatformclock true

 

I heard my hard drive screaming.  I mean it has never make any noise before.  So yeah I think I will need to get a new hard drive to back up my data soon and then get back to it's original setting... not turning on the HPET that is.

  • 3 weeks later...

HardBag (or anyone else here),

 

How do I check the BCD on what's the current setting of useplatformclock, before making any changes to the BCD?

 

BTW, I have checked my system to see if Invariant TSC is supported or not. Says it's supported.

So does that mean I don't need to edit my BCD?

 

For those who don't know how to check, here's how:

 

1. Open AIDA64 -> Motherboard -> CPUID
2. Look for the field "Invariant Time Stamp Counter", and check whether it's supported or not.

 

HardBag (or anyone else here),

 

How do I check the BCD on what's the current setting of useplatformclock, before making any changes to the BCD?

 

BTW, I have checked my system to see if Invariant TSC is supported or not. Says it's supported.

So does that mean I don't need to edit my BCD?

 

For those who don't know how to check, here's how:

 

1. Open AIDA64 -> Motherboard -> CPUID
2. Look for the field "Invariant Time Stamp Counter", and check whether it's supported or not.

 

For the first question: type 'bcdedit' on the command line. 'useplatformclock' will appear under the Windows Boot Loader section if it set.

 

For the second question: the TSC is completely separate from the HPET timer. See: http://en.wikipedia.org/wiki/Time_Stamp_Counter. The invariant version of the TSC is an updated version of the TSC on newer processors:

 
17.13.1 Invariant TSC

The time stamp counter in newer processors may support an enhancement, referred to as invariant TSC. 

Processor?s support for invariant TSC is indicated by CPUID.80000007H:EDX[8]. 

 

The invariant TSC will run at a constant rate in all ACPI P-, C-. and T-states. This is the architectural behavior 
moving forward. On processors with invariant TSC support, the OS may use the TSC for wall clock timer services 
(instead of ACPI or HPET timers). TSC reads are much more efficient and do not incur the overhead associated with 

a ring transition or access to a platform resource.

 

--

http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-vol-3b-part-2-manual.html

Look what I found:  useplatformclock [ yes | no ]

Forces the use of the platform clock as the system's performance counter.

Note  This option should only be used for debugging.

http://msdn.microsoft.com/en-us/library/windows/hardware/ff542202(v=vs.85).aspx

  • 1 month later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm not happy with myself for it, but I've gone and got hold of it. Just another 45 minutes and I'll be Bond, James Bond. In my defence, IO's Hitman series is awesome, and I'm a sucker for 007. So while it might seem a bit simplified compared to Hitman, I'm sure I'll be right at home.
    • Or just check the script yourself ^^. I hate having a Microsoft account tied to my windows install.
    • 007 First Light review: Satisfying spy adventure that James Bond needed by Pulasthi Ariyasinghe I have fond memories of classic James Bond games from the Electronic Arts era. Using high-tech gadgets, sneaking into parties, and dispatching bad guys were wildly exciting activities for my younger self. In recent years, Bond games have entirely disappeared, alongside the super spy genre. Fast forward to 2020, imagine my surprise when IO Interactive announced it had secured the Bond IP to make a game. Considering the studio’s Hitman history, this project is one I keenly kept an eye on. Six years later, 007 First Light is finally here, and after spending time inside this globe-trotting adventure, I can safely say that my excitement for this developer’s take on this universe was not unfounded. IO has taken lessons it has learned from Hitman and combined them with what I would expect from a directed cinematic experience like James Bond. I have refrained from mentioning major plot points to save you from story spoilers in this review. This is an original story that doesn’t tie into any movies, so there isn’t an expectation of knowing the backstory or the decades of movies either. Bond, James Bond When 007 First Light begins, Bond is just Bond. There isn’t a spy angle, fancy gadgets, or even a secret mission. The introductory mission is framed to show how James Bond handled himself and how he does not care about the odds when it comes to saving lives. It’s a gorgeous level as well, showing off an island scattered with cliffs in the middle of a storm. Looking back, this is probably the best-looking level in the game, with IO showing off all its abilities with its custom engine, Glacier. But my favorite ended up being the follow-up to this level. Once the United Kingdom's foreign intelligence agency, MI6, recruits our daring youngster into its super-spy “00” program, training begins. However, instead of treading through the same tutorial missions where the game teaches you to run and jump and drive, IO opted for a montage, and it’s amazing. The scenes cut between Bond practicing and improving his marksmanship, parkour, hand-to-hand combat, and driving as weeks go by in his training. What impressed me here was the lack of any loading screens or stutters as scenes instantly switched to different locations entirely, as if I was watching a movie. This creativity is a trend I noticed in most levels, where there is some sort of gameplay or choreography mechanic being introduced to keep things interesting. Soon, the rest of the cast is introduced, bringing other agents that our favorite secret agent will be working with, the scientists and engineers that build MI6’s spy gadgets, as well as higher-ranking officers that either appreciate or (at best) tolerate Bond’s rebellious attitude. It’s a tight cast, all with incredibly good voice acting and personalities that quickly grew on me. The casting for Bond himself is also an excellent one. From showing his iconic soft spot for women to the condescending smiles that get a rise out of enemies, I had no issues getting immersed into this universe as this new face of James Bond. The missions take place in a wide range of locations as MI6 sends Bond to tackle dangers that are growing everywhere from the UK to Africa. These aren’t unrelated adventures where MI6 is sending secret agents, which is an angle I would love to see in another game, but a part of a bigger conspiracy affecting the entire world. Some of the twists and turns were all too predictable, and the character that Lenny Kravitz played made me cringe a little too much. But all in all, I enjoyed the campaign’s storyline that sets the stage for this new agent joining the illustrious “00” program. Plenty of Possibilities The third-person style of IO Interactive fits this role quite well. Bond is presented as a master at hand-to-hand combat as well as firearms, while also having a knack for being stealthy when required. Most sections of missions have a lot of freedom. This means I could beat up every goon and security guard on the way to an objective, slip past them without sounding a single alarm, or do a mix of both. My sessions usually end up with the third option because I tend to be impatient about waiting for a patrol to move. Drawing from its Hitman genes, the developer almost always gives multiple routes for going through missions. Levels can be massive, sometimes sporting hundreds of NPCs going their own ways and having conversations. If my objective is to break into a security room on the third floor, I could look around for roof access, eavesdrop on conversations to find out where someone lost a key, create a distraction and pickpocket a guard for a keycard, sneak in through the vents, or simply kick down the offending door. I enjoyed the variety on offer, especially because the same solutions didn’t usually show up in different missions. Before heading out into a secret MI6 escapade, the gadget specialist of the branch walks Bond through the organization's latest and greatest achievements. This can be cool little devices like a laser built into the watch, a phone that fires poison darts, or a camera that emits a powerful shockwave. The choice of what can be taken into the mission is up to the player. I could usually find fresh routes or get out of tough situations with a punch or two, so I never had the feeling of missing out by not choosing the right equipment. It’s still a fun practice. Choosing the armaments before a mission enhanced the super spy feeling quite a bit. As I mentioned, stealth comes in as a very viable option for most of the missions, letting Bond sneak past foes or knock them out silently. While it is satisfying to clear entire areas of goons and walk away without any alarms, the way of accomplishing this could have been done better. Bond can lure enemies, sneak up and knock them out, or use a gadget to disorient them before dealing a nasty blow. Bodies cannot be moved or hidden afterward either. It’s a very simple system, which I wish were more exciting to pull off. Perhaps more stealth-orientated gadgets, distraction options, or multi-takedowns could have helped here, I think. Getting caught while attempting to be in stealth does not mean a game over. Other than getting into a fist fight, an interesting twist of 007 First Light is the bluffing option. While an enemy is confused as to what you are doing in a restricted location, Bond has the option to improvise and persuade them that you are exactly where you’re supposed to be. These are fun little dynamic interactions with unique dialog depending on the mission and location, giving a few extra moments for Bond to go past suspicious guards smoothly. It’s the first time I’ve witnessed this system in a game, and I hope to see more. License to Kill Bond isn’t just dealing with security guards or civilians. From time to time, entire gangs of gun-toting mercenaries show up in levels looking to take down our protagonist. It is then that License to Kill mode is activated for Bond, letting him use firearms with no restrictions. I was surprised by just how tight gunplay is in 007 First Light. The weapons feel powerful and satisfying to fire, with single bullets capable of taking down an enemy with a headshot. Ammo is scarce, and enemies don’t drop weapons with full magazines most of the time. This forces a hectic kind of gameplay where I am always advancing towards enemies to take their weapons after they are downed. Things like shooting legs to immobilize, aiming at the hands to make their weapon go flying, blowing up nearby fire extinguishers for cover, and using gadgets to halt a goon in their tracks while I reload, make up enjoyable levels. I had to hold back my disappointment when the enemy count in these action sequences dropped to zero and I had to go non-lethal again. Speaking of action sequences, First Light isn’t just offering sandbox levels to complete at the player’s own leisure either. Each level comes with specific linear and directed scenes to move the story forward and put Bond in tight situations. These usually end up with high-octane chases or driving sections, offering the chance to witness chaining explosions, hails of gunfire, and scripted parkour scenes that remind me of Mission Impossible movies more than Bond. Elements like seeing James Bond jump out of a plane without a parachute or drive through buildings in London inside a trash truck were fantastic and always left me at a high point when finishing a mission. The classic James Bond theme is sprinkled in here too, which only happens a handful of times in the game, but at just the right moments. Visuals and Performance Compared to Unreal Engine 5 games we are seeing nowadays, 007 First Light isn’t flexing a huge amount of realism when it comes to graphics. The models, textures, and effects all feel a little dated, with the starting mission that I mentioned being the most visually striking. However, the complete lack of stutters, the hundreds of NPCs that can be on screen without a single hitch, massive sandbox levels, and smooth transitions between them all play a part in making this an immensely immersive and complex experience. The in-engine cutscenes are gorgeous as well, offering an upgraded visual style and model detail over the gameplay sections. Animations are one aspect that jumps out at me about any new game, and First Light has nailed what a third-person action game should feel like. Walking, sneaking, and running all have a heaviness to them that I appreciate. Whenever Bond moves past a wall or a ledge, his arms reach out to lightly hold those structures until he moves away. NPCs actually react to my character and move out of the way. Even during melee combat or takedown animations, the fists impacting a body or a head hitting a wall all have that same weight. Even the more frivolous animations, like catching a gun in midair or chucking an empty one at a goon (yes, you can do that), are satisfying to pull off. Of course, the in-engine cutscene animations are remarkably well done too, with facial animations and the upgraded model details improving my engagement with the characters. I have an AMD Radeon RX 9070 XT 16GB paired with an eight-core Ryzen 7 3700X and 32GB of RAM, with the game running at 1440p resolution. Deciding to completely max out all the graphics options gave me a range of frame rates between 60 and 100 depending on the scene and level. While I did try to enable AMD FSR, which bumped up the frame rates by a good 20% at Quality mode, IO Interactive’s implementation of the technology wasn’t that great. Every corner and edge in levels began shimmering, and I was also seeing smearing issues in fast-moving sections. The title seemingly uses the older generation FSR 3.1 and not the machine learning-assisted FSR 4, leading to these artifacts. Unfortunately, there isn't a way to manually upgrade this right now either. I opted to turn off the upscaling and play the game in native 1440p to avoid problems. I would say the FPS range I was getting was an acceptable one for a single-player action game for my setup. I do wish there were an FOV slider option in the settings. While the camera is far enough back for my tastes in most situations in this third-person adventure, at times the perspective is far too close. When trying to look around quickly and spot targets, I realized I was getting a slight headache at times due to the use of an almost over-the-shoulder close-up camera. Conclusion Being James Bond in 007 First Light is a treat. Traveling around the world chasing conspiracies, using high-tech gadgets disguised as everyday accessories, and improvising on the spot to fool foes all give a fantastic feeling of being a super spy. For an origin story, IO Interactive has done a great job at introducing the character and his motives for doing what he does. The satisfying combat animation and fantastic voice acting are definitely high points, with the License to Kill moments being my favorite. Not being able to move bodies and the simplistic stealth of mechanics does hurt its presentation a little. The NPC logic and intelligence is easy to manipulate and trick, repeating the same actions over and over again if I keep making distractions. The lack of an FOV slider was also a pain (quite literally) at times, and the FSR implementation is quite poor. These are things I hope the studio will improve upon with updates. Even with its faults, IO Interactive and James Bond are a match made in heaven. The studio knows how to make a main character that oozes charm and competency while also leaning heavily into its Hitman experience to make gigantic levels with what looks like hundreds of NPCs roaming around. Being an origin story, IO’s Bond has a way to go before he becomes the highly effective agent we see in the movie world. I am hoping the studio will continue this series alongside its Hitman ventures going forward, just so we get to experience the journey for longer. 007 First Light is available on PC (Steam, Epic Games Store, and Xbox PC), Xbox Series X|S, and PlayStation 5 for $69.99. This review was conducted on the PC version of the game provided by IO Interactive.
    • [Price Drop] PDF Expert for Mac v3 is still half off by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where for only a limited time you can save 42% on PDF Expert One-Time Purchase. PDFs remain the best way to transmit documents, but editing them isn't possible with standard Mac software. PDF Expert changes that, allowing you to edit PDF text, images, links, and outlines quickly and easily. Typo in a contract? Easy fix. Need to rework a complete section of a document? No problem. PDF Expert provides a series of essential functions that will transform the way you work with documents on your Mac. It recognizes text and OCR, makes edits, and fills out forms. And with the “Enhance” feature powered by AI, it will fix distortions, remove shadows and improve contrast so that even difficult-to-read documents look great. EDIT Change the text. Easily fix typos, update numbers, or add entire paragraphs Insert images. Update logos in a contract or add a new graph to a report Add links. Enrich your PDFs by linking to other pages or external websites ANNOTATE Highlight the important. Make the most valuable content stand out at a glance Comment on PDFs. Add text to PDFs, insert pop-up notes & write your thoughts in the margins Add stamps. Review documents with our set of stamps or create custom stamps for any workflow ORGANIZE Merge PDFs. Combine multiple files into one PDF document Manage pages. Add, delete, rearrange, or rotate PDF pages with ease Split PDFs. Extract pages from PDFs & save them as separate files CONVERT Convert to PDF. Turn JPG, PNG, Word, PPT, and Excel to PDF PDF to Word. Convert PDFs into editable Word documents PDF to image. Turn PDFs into JPG or PNG images PDF to Excel. Convert PDFs into Excel spreadsheets PDF to PPT. Save PDFs as PowerPoint presentations PDF to text. Convert PDFs into editable TXT files FILL OUT Fill out PDF forms. Easily fill out PDF forms by just clicking on them Sign documents. Add your signature to a PDF in a few clicks. Let customers sign documents with handy one-time signatures Redact PDFs. Blackout or erase confidential information from your documents RECOGNIZE TEXT OCR text in PDF. Recognize the text, so you can search, highlight & copy it Enhance scans. Fix distortions, remove shadows & improve contrast Crop & split pages. Split double-page scans into separate pages & remove undesired margins Good to know: Length of access: Lifetime Redemption deadline: redeem your code within 30 days of purchase Access options: Mac Max number of device(s): Unlimited usage on personal macOS devices Version: PDF Expert 3 for Mac (macOS) Updates: Get continuous support and bug fixes. Additional new features may come at an extra cost. PDF Expert One-Time Purchase normally costs $139.99, but you can pick it up for just $69.97 for a limited time, that represents a saving of $70 (50% off). For a full description, specs, and license info, click the link below. Deal Price One time cost now only $69.97 (was $139.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
  • Recent Achievements

    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!