Extremely Bizarre Internet connectivity issues lately with work laptop

By SirEvan
in Smart Home, Network & Security

 Share

Recommended Posts

Grand Master

SirEvan

Posted
Posted

For the last 2 months or so, I've been having extremely strange issues with my work laptop, and nobody, including my IT department has been able to figure it out. It started while I was working from home one day. I would try to access a site (using google Chrome), and I would get a page time out error, like the page couldn't load. I'd open a new tab, or try a new site (intel.com, google.com, ANYTHING) and it wouldn't load. Ten to twenty or thirty seconds later, it would work again. I was using wireless, so I figured my router to be on the fritz, so I replaced it with a new linksys router. Same issues however.

I started to do some investigation, using resource monitor to monitor sockets and number of connections, and I started running ping -t's to known good sites (like google.com) to see what was going on. Every time I couldn't load a site, ping would stop returning results, as if my cable/connection was disconnected (this happens on wired as well). It's as if my network connection disconnects. This can't be the issue however, because during an "outage" I can open up putty, RDC, whatever, and easily connect to a machine on my network (RDC to my file server for example) without issue, and if I open a browser on that machine through RDC, it works no problem.

If I do a Ipconfig /release and then renew, It works again right away, until it goes "down" again...which takes about 20-30 seconds to come back up. I've also noticed that it happens while I'm docked at work on a wired connection, so it's not the wireless, or my home routers. One thought was that Chrome isn't releasing sockets, or too many are open, but leaving resource monitor open during testing shows no more than 50 or 75 connections open at once...it never goes above that, and during the outage/recovery period, the graph never changes, so its not that.

Anyone have any ideas what it might be?

Grand Master

SirEvan

Posted
  • Author
Posted

haven't tried just IE, a coworker suggested that as well. Yes, I can ping local clients (192.x.x.x., 10.x.x.x) and I have no problem RDC/SSH/Telnet/ftp to anything local, it only seems to affect outbound internet traffic. Drivers are up to date, so I'm thinking either something IT pushed out in a group policy setting (unlikely) or a windows update, since the laptop was working fine before. All my home computers are good. I'm going to try using something like IE or firefox and not launching chrome at all and see if this affects my ping/surfing, but will have to do it tonight after a reboot. It may be something with chrome...

As for AV, we run McCrappy, along with things like Guardian Edge, Mandiant Intelligent response, and a few other big brother apps, so theres a possibility that when these things are scanning or doing whatever it is they do, that it could cause momentary loss of connection.

Grand Master

cork1958

Posted
Posted

Ideally you want to boot your computer without all that rubbish in the background (just for testing purposing). Test if the problem still occurs.

Would've been my first thought also. WAY to much "protection"

An update to one of those things is most likely the culprit causing a conflict.

Grand Master

remixedcat

Posted
Posted

Would've been my first thought also. WAY to much "protection"

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Mentor

htcz

Posted
Posted

Sounds sort of like someone has hacked your home network ...

? I dont think this has anythign to do with that but how did you come to that conclusion?

I agree that too much protection and maybe a update conflicts with another program on your PC and is causing all type of issues.

Safe Mode with Networking and see if problem persist. Then we will continue :)

Rising Star

Aldur82

Posted
Posted

Your mention of Group Policy changes triggered something. Do you use a Proxy Server for your internet at work? Might be something skew with the settings. The Proxy Server settings get overlooked quite often because they normally don't cause a problem, Windows just falls back to not using it...until it tries again.

If it's not the Proxy Server settings, then it might be something to do with the wireless network profile. I had an intermittent problem that sounds a lot like this which I fixed it by deleting the existing profile and then setting it up again. It messed up after Windows Update applied some network fixes in a regular update. Since I re-created the profile, the problem hasn't shown up since.

Grand Master

SirEvan

Posted
  • Author
Posted

WE do use a proxy server, although I don't know the exact details, it's something Lockheed runs and all our traffic runs through it. Ended up getting a new laptop and so far it hasn't done it yet on this one *crosses fingers* it's incredibly annoying having to release/renew every 10 minutes just to get internet back.

Thanks guys.

Collaborator

g0dzilla

Posted
Posted

It may have been something like malware or a software update that caused the issue, perhaps upsetting the TCP/IP stack - a TCP/IP stack and Winsock reset *may* have fixed this up.

If if was was a GPO change, then surely some others in the company would have complained of similar issues?

If you use a proxy at work that is set to an IP address then you would most likely have to switch that off when on an external network, i.e. at home or hotel etc. Otherwise you may be using a PAC file and in its script there is a line of code that tells your laptop to connect 'directly' to the Internet if your IP address is not xxx.xxx.xxx.xxx, or not on your internal company subnet...

Collaborator

g0dzilla

Posted
Posted

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Oh and lol @ remixedcat above!

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Epic Games says Unreal Engine 6 will help developers "build content faster" using AI models

      By +pmrd · Posted

      Which game runs at 20fps with framegen?
    • Epic Games says Unreal Engine 6 will help developers "build content faster" using AI models

      By +pmrd · Posted

      The problem isn't with Epic, it's with the platform holders like Steam and Nintendo, they should be a lot more strict in their review process.
    • Nvidia 610.62 driver lands with big bug fixes and Empulse support

      By goretsky · Posted

      Hello, Installed here without issue. Regards, Aryeh Goretsky
    • Microsoft updates Visual Studio Code with easier language model discovery and in-app search

      By zikalify · Posted

      Microsoft updates Visual Studio Code with easier language model discovery and in-app search by Paul Hill Microsoft has released Visual Studio Code 1.125, its latest weekly release. This week, the company has focused on discovering and installing extra language models via the Marketplace; searching the web and securely browsing over remote connections without leaving VS Code; choosing how long VS Code waits before installing extension updates; and delivering managed Copilot settings through existing device management tooling. In older versions of VS Code, extensions could contribute their own model providers, but to find these extensions, you needed the right tags to search for in the Extension view. Now, the Language Models editor gives you an Install Model Providers button that opens the Extensions view, which is filtered to extensions that contribute model providers, making it easier to find and install them. Once you install a provider, its model will appear in the model picker. If you use the integrated browser much, you can now look up information without leaving VS Code by typing a query into the integrated browser’s address bar. It will use your configured search engine, the same way a standalone browser does. You can use workbench.browser.searchEngine to pick a search engine. When the browser is opened in a remote workspace, it's now possible to proxy HTTP(S) traffic via the remote connection. This allows you to connect to any ports or services that can only be accessed from the remote machine. If you read our coverage from two weeks ago about VS Code 1.123, you might have seen that extension updates have a two-hour delay as a safety measure. In this update, Microsoft is giving you the ability to configure the time of the delay. You can find it under extensions.autoUpdateDelay. Finally, with this update, admins can deliver managed GitHub Copilot settings through native device management (MDM) channels on Windows and macOS, in addition to account-based enterprise settings files. Settings delivered via MDM appear as policy-enforced in VS Code and can’t be overridden locally. Future updates will extend the supported policy keys across Copilot surfaces. You can download the update from the Visual Studio Code website now.
    • Microsoft will finally let you sign in to Edge with a Google account

      By monterxz · Posted

      "it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account" You already have a Microsoft account if you are using Windows 11, because you can't set it up without one.

  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      83
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!