Recommended Posts

For the last 2 months or so, I've been having extremely strange issues with my work laptop, and nobody, including my IT department has been able to figure it out. It started while I was working from home one day. I would try to access a site (using google Chrome), and I would get a page time out error, like the page couldn't load. I'd open a new tab, or try a new site (intel.com, google.com, ANYTHING) and it wouldn't load. Ten to twenty or thirty seconds later, it would work again. I was using wireless, so I figured my router to be on the fritz, so I replaced it with a new linksys router. Same issues however.

I started to do some investigation, using resource monitor to monitor sockets and number of connections, and I started running ping -t's to known good sites (like google.com) to see what was going on. Every time I couldn't load a site, ping would stop returning results, as if my cable/connection was disconnected (this happens on wired as well). It's as if my network connection disconnects. This can't be the issue however, because during an "outage" I can open up putty, RDC, whatever, and easily connect to a machine on my network (RDC to my file server for example) without issue, and if I open a browser on that machine through RDC, it works no problem.

If I do a Ipconfig /release and then renew, It works again right away, until it goes "down" again...which takes about 20-30 seconds to come back up. I've also noticed that it happens while I'm docked at work on a wired connection, so it's not the wireless, or my home routers. One thought was that Chrome isn't releasing sockets, or too many are open, but leaving resource monitor open during testing shows no more than 50 or 75 connections open at once...it never goes above that, and during the outage/recovery period, the graph never changes, so its not that.

Anyone have any ideas what it might be?

haven't tried just IE, a coworker suggested that as well. Yes, I can ping local clients (192.x.x.x., 10.x.x.x) and I have no problem RDC/SSH/Telnet/ftp to anything local, it only seems to affect outbound internet traffic. Drivers are up to date, so I'm thinking either something IT pushed out in a group policy setting (unlikely) or a windows update, since the laptop was working fine before. All my home computers are good. I'm going to try using something like IE or firefox and not launching chrome at all and see if this affects my ping/surfing, but will have to do it tonight after a reboot. It may be something with chrome...

As for AV, we run McCrappy, along with things like Guardian Edge, Mandiant Intelligent response, and a few other big brother apps, so theres a possibility that when these things are scanning or doing whatever it is they do, that it could cause momentary loss of connection.

Ideally you want to boot your computer without all that rubbish in the background (just for testing purposing). Test if the problem still occurs.

Would've been my first thought also. WAY to much "protection"

An update to one of those things is most likely the culprit causing a conflict.

Would've been my first thought also. WAY to much "protection"

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Sounds sort of like someone has hacked your home network ...

? I dont think this has anythign to do with that but how did you come to that conclusion?

I agree that too much protection and maybe a update conflicts with another program on your PC and is causing all type of issues.

Safe Mode with Networking and see if problem persist. Then we will continue :)

Your mention of Group Policy changes triggered something. Do you use a Proxy Server for your internet at work? Might be something skew with the settings. The Proxy Server settings get overlooked quite often because they normally don't cause a problem, Windows just falls back to not using it...until it tries again.

If it's not the Proxy Server settings, then it might be something to do with the wireless network profile. I had an intermittent problem that sounds a lot like this which I fixed it by deleting the existing profile and then setting it up again. It messed up after Windows Update applied some network fixes in a regular update. Since I re-created the profile, the problem hasn't shown up since.

WE do use a proxy server, although I don't know the exact details, it's something Lockheed runs and all our traffic runs through it. Ended up getting a new laptop and so far it hasn't done it yet on this one *crosses fingers* it's incredibly annoying having to release/renew every 10 minutes just to get internet back.

Thanks guys.

It may have been something like malware or a software update that caused the issue, perhaps upsetting the TCP/IP stack - a TCP/IP stack and Winsock reset *may* have fixed this up.

If if was was a GPO change, then surely some others in the company would have complained of similar issues?

If you use a proxy at work that is set to an IP address then you would most likely have to switch that off when on an external network, i.e. at home or hotel etc. Otherwise you may be using a PAC file and in its script there is a line of code that tells your laptop to connect 'directly' to the Internet if your IP address is not xxx.xxx.xxx.xxx, or not on your internal company subnet...

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Oh and lol @ remixedcat above!

This topic is now closed to further replies.
  • Posts

    • Nah. For every indie dev that needs to create code for "stuff" or textures, it's a godsend enabler to possibly tackle a project that you may not otherwise. The end result and testing will tell the truth if everything works or doesn't, or a game is just mediocre slop, but now these tools are now there and it's the developer's duty to judge the outcome, and even more so for pro studios. And you gotta remember that they will be at an early stage.
    • whoosh my comment went over your head. Enjoy your notchless 3:2 OLED device
    • As a game dev, today was really depressing. They announced that Blueprints will be deprecated in UE6 to be fully replaced by their sh**ty Python-like Verse language... They also announced that 5.8 will be the last version of UE5 until UE6 comes out in MID 2029!!!! They have completely lost the plot.
    • Prime Early Deal: Amazon Echo Dot Max drops to its lowest price ever by Fiza Ali While Prime Day 2026 is officially kicking off next week, Amazon has started offering Prime Early Deals already. Particularly, the newest model of Amazon Echo Dot Max, unveiled in September 2025, is now selling at its lowest price yet with a 35% discount on its original MSRP. The device features a two-way mono speaker system comprising a 0.8-inch tweeter and a 2.5-inch woofer that should deliver sound across a claimed frequency range of 53Hz to 16kHz. It offers Wi-Fi 6E support (802.11 a/b/g/n/ac/ax) alongside Bluetooth 5.3 with Low Energy, including A2DP for audio playback and AVRCP for device control. The device also operates as a smart home hub, with built-in support for Zigbee, Matter, and Thread Border Router functionality. Furthermore, Amazon Sidewalk is included to help extend connectivity beyond standard Wi-Fi range by leveraging shared network infrastructure. Under the hood, it is powered by the AZ3 processor with an integrated AI accelerator. It also features Omnisense technology, enabling ambient intelligence capabilities such as presence detection, temperature monitoring, and tap gesture control. There are also additional built-in sensors that include ambient light, temperature, and an accelerometer. When paired with a compatible eero router, it can also help extend Wi-Fi coverage by up to 1,000 square feet, supporting speeds of up to 100Mbps and up to 10 devices on the 5GHz band. Setup is handled via the Alexa app, available on Android, iOS, Fire OS, and web browsers. In terms of privacy, it includes a microphone mute button, wake word activation, and options to review and delete voice recordings. Accessibility features cover adaptive listening, adjustable speech rate, audible request tones, and read-aloud support. Lastly, the device is backed by a one-year limited warranty, with optional extended protection available as well. Amazon Echo Dot Max (newest model): $64.99 (Amazon US) - 35% off Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      159
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      67
    5. 5
      neufuse
      63
  • Tell a friend

    Love Neowin? Tell a friend!