Recommended Posts

For the last 2 months or so, I've been having extremely strange issues with my work laptop, and nobody, including my IT department has been able to figure it out. It started while I was working from home one day. I would try to access a site (using google Chrome), and I would get a page time out error, like the page couldn't load. I'd open a new tab, or try a new site (intel.com, google.com, ANYTHING) and it wouldn't load. Ten to twenty or thirty seconds later, it would work again. I was using wireless, so I figured my router to be on the fritz, so I replaced it with a new linksys router. Same issues however.

I started to do some investigation, using resource monitor to monitor sockets and number of connections, and I started running ping -t's to known good sites (like google.com) to see what was going on. Every time I couldn't load a site, ping would stop returning results, as if my cable/connection was disconnected (this happens on wired as well). It's as if my network connection disconnects. This can't be the issue however, because during an "outage" I can open up putty, RDC, whatever, and easily connect to a machine on my network (RDC to my file server for example) without issue, and if I open a browser on that machine through RDC, it works no problem.

If I do a Ipconfig /release and then renew, It works again right away, until it goes "down" again...which takes about 20-30 seconds to come back up. I've also noticed that it happens while I'm docked at work on a wired connection, so it's not the wireless, or my home routers. One thought was that Chrome isn't releasing sockets, or too many are open, but leaving resource monitor open during testing shows no more than 50 or 75 connections open at once...it never goes above that, and during the outage/recovery period, the graph never changes, so its not that.

Anyone have any ideas what it might be?

haven't tried just IE, a coworker suggested that as well. Yes, I can ping local clients (192.x.x.x., 10.x.x.x) and I have no problem RDC/SSH/Telnet/ftp to anything local, it only seems to affect outbound internet traffic. Drivers are up to date, so I'm thinking either something IT pushed out in a group policy setting (unlikely) or a windows update, since the laptop was working fine before. All my home computers are good. I'm going to try using something like IE or firefox and not launching chrome at all and see if this affects my ping/surfing, but will have to do it tonight after a reboot. It may be something with chrome...

As for AV, we run McCrappy, along with things like Guardian Edge, Mandiant Intelligent response, and a few other big brother apps, so theres a possibility that when these things are scanning or doing whatever it is they do, that it could cause momentary loss of connection.

Ideally you want to boot your computer without all that rubbish in the background (just for testing purposing). Test if the problem still occurs.

Would've been my first thought also. WAY to much "protection"

An update to one of those things is most likely the culprit causing a conflict.

Would've been my first thought also. WAY to much "protection"

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Sounds sort of like someone has hacked your home network ...

? I dont think this has anythign to do with that but how did you come to that conclusion?

I agree that too much protection and maybe a update conflicts with another program on your PC and is causing all type of issues.

Safe Mode with Networking and see if problem persist. Then we will continue :)

Your mention of Group Policy changes triggered something. Do you use a Proxy Server for your internet at work? Might be something skew with the settings. The Proxy Server settings get overlooked quite often because they normally don't cause a problem, Windows just falls back to not using it...until it tries again.

If it's not the Proxy Server settings, then it might be something to do with the wireless network profile. I had an intermittent problem that sounds a lot like this which I fixed it by deleting the existing profile and then setting it up again. It messed up after Windows Update applied some network fixes in a regular update. Since I re-created the profile, the problem hasn't shown up since.

WE do use a proxy server, although I don't know the exact details, it's something Lockheed runs and all our traffic runs through it. Ended up getting a new laptop and so far it hasn't done it yet on this one *crosses fingers* it's incredibly annoying having to release/renew every 10 minutes just to get internet back.

Thanks guys.

It may have been something like malware or a software update that caused the issue, perhaps upsetting the TCP/IP stack - a TCP/IP stack and Winsock reset *may* have fixed this up.

If if was was a GPO change, then surely some others in the company would have complained of similar issues?

If you use a proxy at work that is set to an IP address then you would most likely have to switch that off when on an external network, i.e. at home or hotel etc. Otherwise you may be using a PAC file and in its script there is a line of code that tells your laptop to connect 'directly' to the Internet if your IP address is not xxx.xxx.xxx.xxx, or not on your internal company subnet...

Just like using 5 condoms might stop the baby from happening, but it doesn't feel good and it's awkward as hell...

Oh and lol @ remixedcat above!

This topic is now closed to further replies.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!