Core i5 2500K running hot, causing BSOD?

By playXray
in Hardware Hangout

 Share

Recommended Posts

Community Regular

playXray

Posted
Posted

Hi guys,

I think my Core i5 2500K is running too hot and causing a BSOD in Handbrake when encoding large files. I've been leaving my PC on overnight to recode some MKVs for my Plex server, but every couple of nights it will turn itself off or reboot after what is apparently a BSOD error.

The main error report I see when logging back into Windows says:

Problem signature:

Problem Event Name: BlueScreen

OS Version: 6.1.7601.2.1.0.256.1

Locale ID: 2057

Additional information about the problem:

BCCode: 124

BCP1: 0000000000000000

BCP2: FFFFFA8009AE3028

BCP3: 00000000BE200000

BCP4: 000000000005110A

OS Version: 6_1_7601

Service Pack: 1_0

Product: 256_1

Files that help describe the problem:

C:\Windows\Minidump\051112-12698-01.dmp

C:\Users\Ray\AppData\Local\Temp\WER-62572-0.sysdata.xml

Read our privacy statement online:

http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:

C:\Windows\system32\en-US\erofflps.txt

I started another file encoding on Handbrake and then ran HWMonitor to check the temps. The CPU is running at over 90C, which seems pretty bad to me. I turned off Handbrake and the temps immediately dropped to 50C. You can see what HWMonitor was showing under load here:

HWMonitor.png

I have uploaded the full HWMonitor.txt report here.

I think I'm running at standard speeds, but to be honest I can't remember whether my Asus motherboard's "optimised O/C mode" is running and I didn't have time to check before I left for work this morning. I'm running a stock cooler in a well ventilated Coolermaster case that has, until now, provided decent cooling even under sustained heavy loads. I've not had chance to double check the CPU cooler but I'm usually very careful to make sure they're fitted properly.

The Windows crash report files are below but I don't know how to open the .dmp file without it turning into gibberish:

WER-62572-0.sysdata

051112-12698-01.dmp

Do you think the CPU is causing the BSOD error?

Any tips/advice would be much appreciated. Thanks.

Grand Master

Vice

Posted
Posted

Although it sounds like an easy question Wave, Intel now sell a few different "stock" coolers and their new CPU's dont come with a cooler. Is he using the water cooled one? The really small air one or the large air one?

EDIT:// I'm guessing the mid sized air one by your latest post. In that case get a good aftermarket tower style air cooler.

Community Regular

playXray

Posted
  • Author
Posted

It just seems like any other stock cooler I've had before, so I guess it's a "mid-sized" one. It's definitely air cooled.

I'm happy to replace the cooler but even the stock cooler shouldn't be seeing temps like this should it? If there's another problem causing the overheating I want to address that first - I can always get a better cooler later.

Grand Master

Vice

Posted
Posted

Well whilst the air coolers Intel ship with their processors aren't great you are right to say it shouldn't be this hot. I would expect the high load temperature to be around 70c not 90c - And based on the temperature of your Graphics Card I would take an educated guess and say your case has good air flow.

I assume you've already checked the heatsink for dust so it could be the cooler isn't locked down properly or the thermal paste is not making proper contact. The first thing I'd do is remove the cooler, clean its base and the top of the processor and apply some fresh thermal paste. Something like MX-4 is fine to use and affordable.

Rising Star

Aldur82

Posted
Posted

It could be a matter of:

A) The heatsink is covered in dust, preventing a decent transfer of heat when under load. Would need cleaning, which is usually an excellent point to check point B.

B) Thermal paste has run it's course, so would need cleaning off and re-applying some new paste. If the heatsink is detached from the CPU, you will need to clean and re-apply the paste anyway.

C) There is a lack of airflow around where the CPU fan draws air, so it isn't getting enough cool air to cope with the increased heat.

  • Jose_49 and inactive
  • Like 2
Community Regular

playXray

Posted
  • Author
Posted

I've only had it for a few months so I think it's unlikely to be dust or dry thermal paste. I guess it could be a lack of airflow but I did a pretty neat job of clearing wires etc when I installed it. I'll check it over when I get home just in case though, it's got to be worth checking.

I know absolutely nothing about voltages - is there any possibility that they're set incorrectly and could be causing this? How would I check?

Rising Star

Aldur82

Posted
Posted

If it's only a few months old, then I would check the heatsink seating to the CPU as it may have come loose and so will not be making a proper connection.

I wouldn't say it's the voltages, as I've got exactly the same CPU and it's showing the same voltages.

Sounds like I've got the same idle temperatures as you too.

So from what I can figure (and I may be wrong), it could be either an improper seating so the heat transfer isn't good enough...or there was too little/too much paste used when it was put together, again causing a problem with the heat transfer.

Collaborator

g0dzilla

Posted
Posted

Analysed your dump file with WhoCrashed and the details are below:

crash dump file: C:\Windows\Minidump\051112-12698-01.dmp

This was probably caused by the following module: hal.dll (hal+0x12A3B)

Bugcheck code: 0x124 (0x0, 0xFFFFFA8009AE3028, 0xBE200000, 0x5110A)

Error: WHEA_UNCORRECTABLE_ERROR

file path: C:\Windows\system32\hal.dll

product: Microsoft? Windows? Operating System

company: Microsoft Corporation

description: Hardware Abstraction Layer DLL

Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).

This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.

The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.

So yeah definitely an issue with either the HSF (being clogged with dust or faulty) or insufficient thermal paste...or worse; the CPU! Also make sure your BIOS is up to date as well as the chipset drivers.

Collaborator

g0dzilla

Posted
Posted

I would definitely recommend getting an aftermarket CPU cooler, especially if you are constantly stressing the CPU with video encoding etc.

Rising Star

Aldur82

Posted
Posted

Are you running a stock cooler on yours Aldur82?

I am, but I don't do anything nearly as intensive as video encoding so I don't know if my CPU would end up reaching the same temperatures.

I've been thinking about getting a new cooler (a heat pipe style) as my temperature jumps to about 60 degrees just with listening to music, and idles around 50-52 depending on the ambient temperature of the room.

Veteran

Wakers

Posted
Posted

Is the OP overclocking?

If not, I find it quite annoying the amount of tech heads that instantly say "oh, you have to fit an aftermarket cooler" - which is clearly rubbish. If you're not overclocking, the stock coolers are more than enough to cool it properly, regardless of what you're doing.

If that wasn't the case, don't you think there would have been a massive uproar, and thousands upon thousands of complaints about them over heating?

It's much more likely that there's an issue with dust or thermal paste here.

Grand Master

Vice

Posted
Posted

Is the OP overclocking?

If not, I find it quite annoying the amount of tech heads that instantly say "oh, you have to fit an aftermarket cooler" - which is clearly rubbish. If you're not overclocking, the stock coolers are more than enough to cool it properly, regardless of what you're doing.

If that wasn't the case, don't you think there would have been a massive uproar, and thousands upon thousands of complaints about them over heating?

It's much more likely that there's an issue with dust or thermal paste here.

No one here said "oh, you have to fit an aftermarket cooler".

Grand Master

Kami-

Posted
Posted

Is the OP overclocking?

If not, I find it quite annoying the amount of tech heads that instantly say "oh, you have to fit an aftermarket cooler" - which is clearly rubbish. If you're not overclocking, the stock coolers are more than enough to cool it properly, regardless of what you're doing.

If that wasn't the case, don't you think there would have been a massive uproar, and thousands upon thousands of complaints about them over heating?

It's much more likely that there's an issue with dust or thermal paste here.

Actually, if you're constantly raising the temperature of your CPU you're causing degredation - ergo, It's advisable (quite rightly so) to recommend a better after-market cooling solution to maintain the lower temperatures for the longevity of the CPU in cases where high stress is placed on the CPU for long periods of time.

However that being said; yes it really shouldn't be hitting over 70-75c and so there quite probably is either a dust or thermal-paste issue occuring here too.

Collaborator

g0dzilla

Posted
Posted

No one here said "oh, you have to fit an aftermarket cooler".

+1

Yes who are you actually quoting "Wakers"?!

Suggestions have merely been made here and not ultimatums; due to the OP running a lot of video encoding tasks that highly stresses the CPU.You are also assuming that he has not overclocked when in fact he stated in his first post that he does not know if he has or not (his motherboard may have applied an overclock profile to his system from the push of a button or through the use of software): "I think I'm running at standard speeds."

Community Regular

playXray

Posted
  • Author
Posted

Do you think it's just a coincidence that my CPU is running hot then? I'll have to dig out my spare GPU from the loft and see if that makes any difference to the BSOD, though I still want to get my temps down!

Community Regular

playXray

Posted
  • Author
Posted

Ok guys well the hot CPU *seems* to have been resolved. It turns out that the "optimised" mode was enabled in the BIOS. I disabled this, and now temps are running at an average of about 70C, peaking at 76C briefly, and I've been recoding files for about an hour. Certainly nowhere near the 90C I was getting this morning after 20 minutes.

I've got a few more files to go through tonight so I'll leave it on again and if it's not crashed by the morning I guess it's safe to say the problem has been resolved.

Thanks for all the help guys.

Collaborator

g0dzilla

Posted
Posted

OK that makes sense! That's why I mentioned an overclock profile earlier. Seems as though the stock cooler couldn't handle the overclock then.

Glad you got it sorted, those temps are much better.

This topic is now closed to further replies.
 Share
Go to topic listing