Recommended Posts

Well its about time to build a new system, and I am looking for energy efficient parts this time...

my current Intel X58 Chipset with the original i7 920 processor uses about 250 watts idle.... I would like this time to take that wattage down some... I'm not talking going i3 or laptops here... I am just saying make it as conservative in power usage when idle as possible...

Right now I have a 750 watt Corsair 80+ PSU, when I think about it now, 750 Watts might of been overkill (was going to SLI high end nVIDIA cards 3 way but never got to it), since I never max out at that wattage...

what is the current standard for the most efficient PSUs? I really looked into their ranking, see 80+ gold, platnum, bronze, not sure how they rate them, etc

I assume you want active PFC's now? That does make it more efficient right?

Any recommendations on efficient PSU's?

also, I know motherboards / chipsets play a big part in power consumption, anyone know what the wattage is running on the latest Intel chipsets and what motherboards are most efficient?

CPU wise I am probably going to be in the Ivy Bridge range either i5 or i7, as this build is probably 6 months out (Starting research for it now obviously)

I know the X58 chipsets where power hogs... so probably anything newer right now is more efficient, and the thermal dispersion wattage of the newer cpu's seems much lower now days then the 920 chip I have now

Link to comment
https://www.neowin.net/forum/topic/1077495-energy-efficient-pc-build/
Share on other sites

Where are you getting that 250watt figure? That seems way too high for idle. My 2 year old AMD Phenom II system uses ~110W idle ~240W full load. My AMD E-350 server uses 30W idle.

Make sure the CPU and GPU are underclocking when idle. The difference in power usage while idle in any modern processor would be negligible. Take this for example, the idle power consumption for most intel processors is almost exactly the same. You shouldn't base your next system on power consumption, you should base it on how much processing power you need.

Where are you getting that 250watt figure? That seems way too high for idle. My 2 year old AMD Phenom II system uses ~110W idle ~240W full load. My AMD E-350 server uses 30W idle.

Make sure the CPU and GPU are underclocking when idle. The difference in power usage while idle in any modern processor would be negligible. Take this for example, the idle power consumption for most intel processors is almost exactly the same. You shouldn't base your next system on power consumption, you should base it on how much processing power you need.

Verified two ways, used a Kill-A-Watt and it reads 250 Watts at idle... and I have a whole house power monitor (TED5000) and when the computer is on the house power raises 250ish watts

Ivy Bridge and Z77 (Asus' Sabertooth Z77 is quite nice) should do the trick, and look for PSUs with 90% or higher efficiency, for example some of Be Quiet's (http://www.bequiet.com/en/powersupply/280). Do read reviews beforehand though, the "unseen technicalities" makes a lot of difference. The graphics card will obviously also play a large role in this.

Im doing a new build now as well, also with an eye on efficiency. Z77/Ivy Bridge is the the best power/performance wise right now, 80 Plus Gold or better PSU is a must. You might want to look at the Core i5 3550S, quad core at 65w. I'm going with mATX as I dont need all the extras and I read mATX draws less power, depends on the person I suppose. From what I read a mobo with Lucid Virtu will idle the GPU and use internal Intel graphics for simple stuff like web browsing, so I'm sure that helps too. Good luck with your build!

Neu - Why are you concerned about enery usage living in the U.S. ? Surely its not because you want to save $2.00 a year in electricity bills... Is there a specific reason ?

$2 a year? yeah right... if I could drop my power usage by half I could save up to $150 a year, that's how bad the electic bills are getting up here since they deregulated pricing last year... just a year ago my electic bills where running $50-$70 a month... now they are running $190 to $310 a month! and I am using the same killowatt hour usage per month on average!

our rates more then doubled in 6 months! we had a rate lock on rates until end of 2010, last year that ended, and since then rates have been skyrocketing even with competition, its going up really fast... every month has turned into another I don't want to look at the power bill moment because it probably went up again in cost... we can rate lock for 6 months, but then they kill you after that with a big hike to make it up it seems like...

and why? because I want to! I just want to be able to say I did this and it worked!

$2 a year? yeah right... if I could drop my power usage by half I could save up to $150 a year, that's how bad the electic bills are getting up here since they deregulated pricing last year... just a year ago my electic bills where running $50-$70 a month... now they are running $190 to $310 a month! and I am using the same killowatt hour usage per month on average!

our rates more then doubled in 6 months! we had a rate lock on rates until end of 2010, last year that ended, and since then rates have been skyrocketing even with competition, its going up really fast... every month has turned into another I don't want to look at the power bill moment because it probably went up again in cost... we can rate lock for 6 months, but then they kill you after that with a big hike to make it up it seems like...

and why? because I want to! I just want to be able to say I did this and it worked!

Wow - $70 jumping to $310 - that is bad - I see what you mean.

What do you pay per kil0watt ?

Wow - $70 jumping to $310 - that is bad - I see what you mean.

What do you pay per kil0watt ?

it's sadly variable.... I've seen it as low as $0.1459 and as high as $0.199 every so many months they can change rates now... we use to be at a fixed rate that didn't change for 10 years I believe it was... so it was MUCH cheaper considering it was fixed for 10yrs... right now we are paying $0.1655 i think

hopefully another invesement I made this year will help... highest efficency furnace and 20SEER AC unit (didn't just buy this because I thought I could save money, the old AC unit was shot and was only 8SEER and the furnace used 2.8KW/h to run the darn blower!) the new furnace only uses between 50 and 150 watts to run the blower (DC variable speed motor instead of a PSC AC motor which are energy hogs) furnace was crap too.. previous owners bought the cheapest one they could find 2yrs before we bought the house, and it just wasn't working right when we moved in... and only got worse in the past 3yrs...

I dont know if this is what you want, but I use around 100-110 idle, 150 watts load with the following in my file server:

Asrock 880GXH-USB3 board

AMD X3 455 processor

4x Kingston 4gb 1600 RAM sticks

8x Samsung HD204UI 2TB drives

1x Dell PERC 6/I raid controller

1x Intel gigabit nic

1x Corsair C300 SSD for booting.

This stays on 24x7, and while it idles most of the time, it serves my email, web sites, and movies/tv/music to my HTPC (and streaming music to my phone). My monthly electricity bill in my apartment is around 35-45$, thats for everything I have (refrigerator, microwave, 47" plasma tv, stereo receiver, I5 Desktop, printer, 16Port gigabit swithc, 5port switch, LED lighting (got rid of CFL's), networked tv tuner, etc.

Do you leave your computer running 24/7?

it has to be on about 18hrs a day due to working and running long running tasks... but all that and the eclectic rates are irrelevant to this top, I just want to make an energy efficient system? this is not about politics or anything else? this is no different than the I want my PC silent community, I just want to make it efficient instead of silent... it's just an end goal

it has to be on about 18hrs a day due to working and running long running tasks... but all that and the eclectic rates are irrelevant to this top, I just want to make an energy efficient system? this is not about politics or anything else? this is no different than the I want my PC silent community, I just want to make it efficient instead of silent... it's just an end goal

I forgot to mention that I have a Cosair H60 water cooler and an NZXT H2 case, my system is silent. If you really want low power, you could use an Atom 330 board. My original win2k8r2 server was based on an dual core atom board and 8GB of ram, and I used around 80 watts at idle, thats slightly more than a regular incandescent bulb.

I forgot to mention that I have a Cosair H60 water cooler and an NZXT H2 case, my system is silent. If you really want low power, you could use an Atom 330 board. My original win2k8r2 server was based on an dual core atom board and 8GB of ram, and I used around 80 watts at idle, thats slightly more than a regular incandescent bulb.

Atom isn't powerful enough, like I said at the start I want an i5 at minimum, just as efficient as I can get it... just trying to track down what motherboards are the most efficient, what PSU's are etc...

it's sadly variable.... I've seen it as low as $0.1459 and as high as $0.199 every so many months they can change rates now... we use to be at a fixed rate that didn't change for 10 years I believe it was... so it was MUCH cheaper considering it was fixed for 10yrs... right now we are paying $0.1655 i think

That's high! Here I pay 5.32?/kWh for the first 30kWh used each day and after you go over it's 7.51?/kWh.... and I thought that was high :/ (oh plus a 40.64? / day flat charge)

That's high! Here I pay 5.32?/kWh for the first 30kWh used each day and after you go over it's 7.51?/kWh.... and I thought that was high :/ (oh plus a 40.64? / day flat charge)

is that for generation, transmission or both? because if you just take generation for us its only about half the cost... but you have a generator and a transmission company here... transmission companies are fixed as they are the ones that own the lines to your house.... generators we can shop around for

here's just one of the two companies that bill me they come as one bill though combined..

Generation/Transmission $0.07249538

now that for the distribution costs...

Distribution $0.081756

Consumer Education Charge $0.000210

Solar Requirements Charge $0.000110

Default Service Support Charge $0.000500

Non-Utility Generation Charge $ 0.009030

that comes out to $0.16410 per KW/h

anyone use Kingwin PSU's? I've never used one they seem to have good reviews, fanless always scares me on a psu, but they sound like they are pretty efficient

I don't really recognize the brand at all, but I did some research and looked up a few reviews on some kingwin units on jonnyguru and they actually seem to be pretty solid PSU's, here's a review of one of the fanless units from last year: http://www.jonnyguru...Story5&reid=253

from what I see in those reviews they seem to perform very well, they are just on expensive side. Getting one of the platinum certified units wouldn't be a bad idea if you are worried about efficiency.

I don't really recognize the brand at all, but I did some research and looked up a few reviews on some kingwin units on jonnyguru and they actually seem to be pretty solid PSU's, here's a review of one of the fanless units from last year: http://www.jonnyguru...Story5&reid=253

from what I see in those reviews they seem to perform very well, they are just on expensive side. Getting one of the platinum certified units wouldn't be a bad idea if you are worried about efficiency.

yeah, all the reviews I've seen so far have been great, I never heard of them before either.. but being 92+% efficient is awesome since thats a lot less heat generated also... price is high, but not that bad

just read that review you posted and I just love the fact the guy took off a point for not having a Metal Oxide Varsistor (MOV)... if you put one of those on say bye bye to your 90+ efficiency rating....

I have heard of Kingwin - normally its cheap chinese-made accessories/adapters. I have also seen a couple of PSU from then in the 1KW range.

If I remember correctly it was considered an OK PSU - but considering all of the other options out there - I think I would look elsewhere - but thats just me.

I have a Seasonic 1KW Platinum its not silent, but hasnt blown up anything yet so I guess its OK- cant remember price.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The flaw with this analysis is that this laptop has a cellphone CPU in it. In the Intel world, that would be an N150 and those are everywhere, even in low end laptops. You can get an N150 based NUC with 16GB RAM and 256GB-512GB SSD... NOT soldered in... for < $500 Canadian (around US$360). The problem is two fold: tech bloggers/writers on most tech site (like this one, ironically) overvalue Apple and apparently aren't in the same earnings class as most regular people. As a result, we get breathless articles about how everyone needs a folding phone when most people just cannot afford one... or really need one. And we get Apple used as the baseline metric regardless of whether that comparison makes any sense. If Dell or HP released a retail laptop with a cellphone motherboard, you'd be all over them for doing that - but Apple does it and it's genius. I see articles suggesting what Samsung - a company that basically started the foldable phone market and has built them for eight years - needs to do to compete with Apple's unreleased, unspecced and unseen folding phone. Sorry, no - if the Neo (really creative name there BTW - still, better than the Go, the other "creative" product name everyone's using) encourages PC makers to make cellphone laptops using lower end ARM processors, we all lose. It's a step backwards and a capitulation to the fact that semiconductor makers and computer OEMs (and tech bloggers) have totally lost the plot.
    • Everyone should install this extension and ignore games that use AI. https://chromewebstore.google....nnigaaeelfkeomjcngmnh?pli=1 https://addons.mozilla.org/en-US/firefox/addon/ai-warning-for-steam/
    • Malwarebytes Anti-Malware 5.6.0.256 by Razvan Serea Malwarebytes is a high performance anti-malware application that thoroughly removes even the most advanced malware and spyware. Malwarebytes version 5.**** brings comprehensive protection against today’s threat landscape so that you can finally replace your traditional antivirus. You can finally replace your traditional antivirus, thanks to a innovative and layered approach to prevent malware infections using a healthy combination of proactive and signature-less technologies. While signatures are still effective against threats like potentially unwanted programs, the majority of malware detection events already come from signature-less technologies like Malwarebytes Anti-Exploit and Malwarebytes Anti-Ransomware; that trend will only continue to grow. For many of you, this is something you already know, since over 50% of the users already run Malwarebytes as their sole security software, without any third-party antivirus. What's new in Malwarebytes 5.****: Unified user experience - For the first time, Malwarebytes now provides a consistent experience across all of our desktop and mobile products courtesy of an all new and reimagined user experience powered by a faster and more responsive UI all managed through an intuitive dashboard. Modern security and privacy integrations - Antivirus and ultra-fast VPN come together seamlessly in one easy-to-use solution. Whether you’re looking for a next-gen VPN to secure your online activity, or harnessing the power of Browser Guard to block ad trackers and scam sites, taking charge of your privacy is simple. Trusted Advisor - Empowers you with real-time insights, easy-to-read protection score and expert guidance that puts you in control over your security and privacy. Malwarebytes 5.6.0.256 changelog: Features and improvements Simplified adding files and folders to the Allow list to make managing your exclusions easier. Improved notifications for Webcam Monitoring. Issues fixed Resolved an issue preventing the Deep Scan results window from displaying when several threats are detected during a scan. Fixed text wrapping issues on the Settings page. Fixed an issue causing tray menu notifications to appear off-screen when using multiple external monitors. Download: Malwarebytes 5.6.0.256 | 436.0 MB (Free, paid upgrade available) Links: Malwarebytes Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Steam Next Fest returns with thousands of new demos to try out by Pulasthi Ariyasinghe Valve has been routinely kicking off demo festivals on Steam for years now, and the second drop of 2026 has just opened its doors. It's a great opportunity for any PC gamers to find some interesting games before they release. The June edition of Steam Next Fest is a week-long digital festival including gameplay slices from a large number of indie developers, though a few major publishers are involved this time too. Interested players can use the Next Fest hub page's various sorting and filtering options to easily sort through the hordes of demos available. The top buttons offer quick access to separate and important sorting options, including "By Genre, By Theme, By Feature," with each one offering more granular settings when clicked. At the same time, the built-in Steam tags system is also available below every page to discover new games more quickly. As always, logging in will also enable Steam gamers to utilize Valve's recommendation algorithms to find game demos they might like, specifically, depending on their past play and purchase histories. This time there is even a toggle now to swap between getting a random and personalized selection as Valve collects more data on the available demos. The Charts section is where you can find the most popular demos on the platform right now, offering up the most hyped titles in a simple list. Right at the kickoff, Mistfall Hunter, Empulse, Echoes of Aincrad, Onimusha: Way of the Sword, Over the Hill, Mortal Shell II, and more are trending. Expect this list to change as the week progresses. This edition of the Steam Next Fest is slated to end on June 22 at 10 AM PT. Valve's latest event is now open, and it can be accessed by going to the dedicated hub page here.
    • I lived and breathed MSN Messenger/Windows Live Messenger. Going to the mess.be website (still online with no changes since 2013) to download display pictures etc. I was a beta tester for Messenger Plus! and spent quite a lot of time on the MsgPlus! forums (a read-only copy is still online at https://shoutbox.menthix.net) Some old Neowin articles also https://www.neowin.net/news/messenger-plus-350/ good times but how time flies The main developer of Messenger Plus!, Cyril aka. Patchou has released a game https://store.steampowered.com/app/3275440/Pluralys/
  • Recent Achievements

    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!