Recommended Posts

  • 1 month later...

Well I built my new system, went with an i5 Ivy Bridge for now... still runs faster then my 920 i7 benchmark wise so far

Went with a corsair Obsidian 550D case... love it! the accustical insulation and rubber gaskets defaintly cut sound down, I can't even hear the thing runing. I can only hear the back fan when I get within 2 ft of it. Power button, reset button, are solid, USB3 on the front is nice, LED's are white but not bright, they are a good brightness for night time... only downside to this case is there is no suspend LED if you wanted that... my MSI motherboard has a pin for power and a pin for suspend, can only plug the power un, so when its suspended I can't see it blinking or change color. but that is a minor issue...

Set the main OS boot drive up as a samsung 830 128GB SSD running on a 6Gb/s SATA port

Have two 1TB backup HDD's running on SATA 3Gb/s ports in RAID1

Went with a Z77 Chipset MSI Z77A-GD65 motherboard, was going to go with GD80 but couldn't justify the almost $100 price increase for thunderbolt.

Intel Core i5 3570K 3.4GHz Ivy Bridge CPU

16GB of DDR3 RAM

and threw in my previous gen Creative Labs x-fi pci express sound card... onboard sound with the MSI motherboard was causing whineing and electonic noise... not sure why, it went away with the x-fi card though...

installed windows 7 x64 as a UEFI boot

after all that, the system idles at 42 watts. full 100% CPU usage it maxes out at 109 watts, average usage it hovers between the 42 watts and 52 watts.

definatly a huge decrease in electic usage... 200 watts per hour saved should save me almost 3KWh a day! that's about 1 megawatt saved in a year!

Add this in too, I only have the stock cooler right now and an older 80% efficiency PSU at the moment (newer 92% efficient 80+Platnum certified is coming monday)

so wattage should go down more when I get the higher efficiency PSU on, right now CPU Core temps are hovering around the 25 degree Celcius mark, not bad for a stock intel fan... even under heavy load they only get to the high 50's... getting better cooling though eventually

well after getting my Kingwin LPZ-550 PSU added on my wattage for my system at idle is a whole 40 watts! at 100% CPU usage it is a whole 99 watts

This was after a couple days of burn in testing and such, seemed the more burn in I did the more efficient the system worked... odd but ok

That is a major difference from my X58 system which maxed out at 300 watts at full load and could idle as low as 160 watts on a good day..... but averaged 200-250 watts

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still using Microsoft Money 2005 in 2026 here!
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!