Recommended Posts

After upgrading MSE to 4.0 I always get a warning from Action Center that MSE isn't activated when i reboot..

Nothing has changed in my setup since previous version of MSE. (Windows 7 Ultimate, SP1, Windows Firewall)

I have no other anti-virus and there is no problem to reactivate, it's just annoying.

MSE seems to work as it should activated or not.

Does anyone have a suggestion?

You can remove that problem by following these two simple steps

  • Go to Control Panel
  • Click on System and Security
  • Click on Administrative Tools
  • Click on Services
  • Find Microsoft Security Essentials Antimalware on the list and click on Automatic from the popup menu.

If it's stopped click on Start service on the list.

All fixed.

Thanks for your replies. I have reinstalled MSE and checked that it is on automatic start in services.

Another strange thing is that action center is asking me if I trust this program to be started (msseces.exe), but it is already running?

Does MSE (or action center) depend on any other service to run?

I don't even have that problem ever. The easiest way to fix your problems completely is to do a clean install of the OS.

But first get the drivers and neccesary softwares before you do it. And everythin should be fix completely.

I don't even have that problem ever. The easiest way to fix your problems completely is to do a clean install of the OS.

But first get the drivers and neccesary softwares before you do it. And everythin should be fix completely.

Sorry, but reinstall everything is not an option, it would take me days to get all back in place. If necessary I rather switch to another anti-virus.

But MSE is still working, it's just the annoying message from action center.

The easiest way to fix your problems completely is to do a clean install of the OS.

No, it isn't. I'm sick of such amateur hour solutions that don't solve anything. A complete system wash 'n' wipe is NOT

the way to fix a problem such as this. Reinstalling the OS can take up a lot of time, and should only ever really be a

last resort option. If the OS is pretty much hosed due to malware, or some other similarly serious issue, and all

other possible options to rectify the problems have been exhausted, then yes, reinstall the OS.

Suggesting a reinstall of the OS for a relatively trivial issue, is like cutting off your nose to spite your face.

I've had this issue a couple of times with MSE - where it's running but not showing up in the system tray. This then causes action centre to think it's disabled.

I've also had an issue where it was disabled for no reason on boot. (Icon in system tray but red)

The first issue was fixed by uninstalling and reinstalling. The second was being caused by a Windows update that I removed and reinstalled. I have no idea which one it was though, sadly.

I had hopes for last patch tuesday but that didn't help, hopefully next does. What I not have been able to figure out is what Action Center does to activate MSE when I manually choose to do that, and what triggers the activation when the virus definitions is updated.

Can we see the exact error that action center is showing, and your about for mse - also is real time protection on, etc.

Just noticed your location - so your windows is non english version? But mse is english version?

Also this issue only happens on reboot? What happens if you just wait a couple of minutes does the action item go away? Have seen this a couple of times were once machine has just recently been a bit of confusion if mse is running, etc.

post-14624-0-49141400-1338555575.jpg

post-14624-0-61029300-1338555585.jpg

@+Budman

This is what Action Center looks like when I get the notification, in Swedish though.

29fqw5c.jpg

I when I activate MSE, button "Aktivera nu", it looks like this.

Defender is off all the time.

P? means On., brandv?gg means firewall.

ac4ufc.jpg

MSE definitions versions

Security Essentials Version: 4.0.1526.0

Antimalware Client Version: 4.0.1526.0

Engine Version: 1.1.8403.0

Antivirus definition: 1.127.1237.0

Antispyware definition: 1.127.1237.0

Network Inspection System Engine Version: 2.0.8001.0

Network Inspection System Definition Version: 11.0.0.0

@Athlonite

Yes that was my thought as well, but the notification stays until MSE at some time during the day updates its virus definitions, or I do it manually.

So looks like your running english version? Why not the swedish version?

If you OS is swedish, I would run that version of mse -- you can get hose here

http://windows.micro...ntials/download

I used the Swedish version when this started to happen,and I have done a couple of uninstall / reinstall, so I don't think the language makes any difference.

When it's not necessary to change, I try to keep the English versions of my programs, because the translations can be terrible. It is also hard to follow a discussion in forums when I have to find an equivalent word in English for a Swedish one, as in various settings and menus.

No, not at all. Internet is up and running within a minute after my desktop shows. But MSE doesn't update until my laptop has been idle for a while and that can take several hours.

I just try to figure out what triggers Action Center to consider MSE activated when the virus definitions is updated. If I reboot directly afterwards, its back to "MSE not activated".

  • 2 weeks later...

Sorry for the late answer, I'm on holiday in Thailand right now. I am currently using my netbook and it's working as it should, so I will compare services running in my main laptop with my netbook, when I get back home and see if I can discover any differences. Both are the same brand, HP.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LibreWolf 152.0.1-2 is out.
    • Honestly... 4 wasn't fun, 5 had unlikeable, annoying, or dull characters... Yeah, to me the magic died with San Andreas.
    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!