Question about the Chip and Pin Credit and Debit Cards


Recommended Posts

Just wondering. I recently went to this computer store to make a purchase, when I went to pay for it. I was told I cannot insert my credit card that uses the chip myself and that they have to do it for me.

Are they allowed to do that? I thought the whole point of the chip and pin technology was so you can insert it into the system yourself so that it prevents others from handling it possible possible skimming.

Or is this normal practice at most places?

I don't believe that is the point of the chips. My understanding is that they are cryptographically stronger than the magnetic swipe, also harder to clone.

It's odd that they insisted on inserting it themselves, but not of particular concern as far as I am aware.

Part of the appeal of chip and PIN is that it gives customers confidence when they know they are the only person that has handled their card. The big supermarkets here have readers which always face the customer - there is no need for the cashier to go anywhere near it.

If the card reader is behind a counter of some description I insist on putting the card in myself. There is no reason why they should say I can't do it. There are too many stories of people having their cards cloned at petrol garages when they hand their card over to the attendant and they swipe their card with a sleight of hand trick.

If they were really stern about you not putting the card in yourself I would be very suspicious and would probably tell them to bugger off. You can buy computer stuff anywhere.

Never heard of someone asking me for my card, they normally just tell me the price and I go ahead and put in my card. If someone insisted that I pass my card over for them to insert I would probably be wary and question their reasoning.

Ultimately though I probably wouldn't be too concerned. After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless. To be on the safe side though, check your account over the next week and look for anything dodgy.

After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless.

Not if you dirty the chip up a bit and force the fallback to signing a receipt. If you clone a card the signature on the back will be yours, so you don't even have to forge it.

Some card machines require the cashier to insert the amount in AFTER the card has been inserted. It's a damn stupid system but that's the way they work.

Some Specsavers stores use these systems, they take your card, put it in, enter the amount then hand you the machine, you then check the amount and type in your pin then hand the device BACK to the cashier.

I don't mind allowing the cashier to handle my card, but I always watch carefully and NEVER let them move the card out of my site. I always check EVERY receipt too before leaving.

Never heard of someone asking me for my card, they normally just tell me the price and I go ahead and put in my card. If someone insisted that I pass my card over for them to insert I would probably be wary and question their reasoning.

Ultimately though I probably wouldn't be too concerned. After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless. To be on the safe side though, check your account over the next week and look for anything dodgy.

There are ways to bypass a chip card.

If its a big name computer shop then i wouldnt be to worried but if its a small shop then id check me statements

It's just a local computer store.

Some card machines require the cashier to insert the amount in AFTER the card has been inserted. It's a damn stupid system but that's the way they work.

Some Specsavers stores use these systems, they take your card, put it in, enter the amount then hand you the machine, you then check the amount and type in your pin then hand the device BACK to the cashier.

I don't mind allowing the cashier to handle my card, but I always watch carefully and NEVER let them move the card out of my site. I always check EVERY receipt too before leaving.

The system in this store is putting the chip card after the amount has been put so it that's not the issue.

It's not like the cable to the machine was too short, because it's the same machine they give to the customers to enter the pin. So it's easy access for the customer to simply put in their card themselves and enter the pin.

I'm just curious if there is a statement from like visa or something that states that the cashiers aren't suppose to ask to give them your card.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!