Question about the Chip and Pin Credit and Debit Cards


Recommended Posts

Just wondering. I recently went to this computer store to make a purchase, when I went to pay for it. I was told I cannot insert my credit card that uses the chip myself and that they have to do it for me.

Are they allowed to do that? I thought the whole point of the chip and pin technology was so you can insert it into the system yourself so that it prevents others from handling it possible possible skimming.

Or is this normal practice at most places?

I don't believe that is the point of the chips. My understanding is that they are cryptographically stronger than the magnetic swipe, also harder to clone.

It's odd that they insisted on inserting it themselves, but not of particular concern as far as I am aware.

Part of the appeal of chip and PIN is that it gives customers confidence when they know they are the only person that has handled their card. The big supermarkets here have readers which always face the customer - there is no need for the cashier to go anywhere near it.

If the card reader is behind a counter of some description I insist on putting the card in myself. There is no reason why they should say I can't do it. There are too many stories of people having their cards cloned at petrol garages when they hand their card over to the attendant and they swipe their card with a sleight of hand trick.

If they were really stern about you not putting the card in yourself I would be very suspicious and would probably tell them to bugger off. You can buy computer stuff anywhere.

Never heard of someone asking me for my card, they normally just tell me the price and I go ahead and put in my card. If someone insisted that I pass my card over for them to insert I would probably be wary and question their reasoning.

Ultimately though I probably wouldn't be too concerned. After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless. To be on the safe side though, check your account over the next week and look for anything dodgy.

After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless.

Not if you dirty the chip up a bit and force the fallback to signing a receipt. If you clone a card the signature on the back will be yours, so you don't even have to forge it.

Some card machines require the cashier to insert the amount in AFTER the card has been inserted. It's a damn stupid system but that's the way they work.

Some Specsavers stores use these systems, they take your card, put it in, enter the amount then hand you the machine, you then check the amount and type in your pin then hand the device BACK to the cashier.

I don't mind allowing the cashier to handle my card, but I always watch carefully and NEVER let them move the card out of my site. I always check EVERY receipt too before leaving.

Never heard of someone asking me for my card, they normally just tell me the price and I go ahead and put in my card. If someone insisted that I pass my card over for them to insert I would probably be wary and question their reasoning.

Ultimately though I probably wouldn't be too concerned. After all, "chip and PIN" should mean that they can take my card, but without my PIN number it's useless. To be on the safe side though, check your account over the next week and look for anything dodgy.

There are ways to bypass a chip card.

If its a big name computer shop then i wouldnt be to worried but if its a small shop then id check me statements

It's just a local computer store.

Some card machines require the cashier to insert the amount in AFTER the card has been inserted. It's a damn stupid system but that's the way they work.

Some Specsavers stores use these systems, they take your card, put it in, enter the amount then hand you the machine, you then check the amount and type in your pin then hand the device BACK to the cashier.

I don't mind allowing the cashier to handle my card, but I always watch carefully and NEVER let them move the card out of my site. I always check EVERY receipt too before leaving.

The system in this store is putting the chip card after the amount has been put so it that's not the issue.

It's not like the cable to the machine was too short, because it's the same machine they give to the customers to enter the pin. So it's easy access for the customer to simply put in their card themselves and enter the pin.

I'm just curious if there is a statement from like visa or something that states that the cashiers aren't suppose to ask to give them your card.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!