Samsung Galaxy S3 (GTi9300)


Recommended Posts

UPDATE: 2012.08.07:

S3 Power Bank review added to post #74

Following on from my popular S2 review I thought I'd post an S3 review, I'll be actively updating this as always but to note, my Pebble Blue S3 isn't due until the 13th June due to that manufacturing delay that you guys will have read all about so my intiial review and impressions are on the Marble White version belonging to my dad which landed today.

I will be comparing most things with the S2 (naturally) but I won't do a comparison on daily usage differences until I've had my own S3 a full working week so will only cover things that are immediately obvious and comparable.

Firstly, let's get the bad stuff out the way.

1: You cannot change brightness by sliding the notification bar like on the S2. This is rather lame and I can't wait to root my handset and get a custom ROM with that feature baked in.

2: Auto brightness is rather conservative compared to the S2. Even in normal lighting the brightness is a bit low.

2b: This part would not bother me as I adjust brightness via sliding the bar up top but since auto brightness isn't as aggressive as I'd prefer, custom ROM is the way to go (for me).

3: The Galaxy S2 MHL cable does not work on this. I tried multiple chargers, the S3 charger outputs 1amp vs 750mA of the S2 and even that didn't work. Looks like MHL dongle owners of the S2 will want to sell up and upgrade to the S3 one.

4: Using the "antishake" mode in the camcorder causes the video to zoom in slightly regardless of video resolution used. - I understand why this is now, just a slight annoyance that it has to be this way as I'm used to IS on my DSLR but of course it's not possible to bung gyros into a phone sized shell. Or practical for that matter :p

5: The LED and button backlights do bleed through the white chassis surround, the same is visible on the white S2.

6: The music volume via headphones at max level 15 isn't as loud as 15 on the S2 by a value of about 1.

7: There is a wake delay of about 1 second from when the screen is off and the phone in deep sleep, just like on the S2. Some people dislike this while others don't care either way. I'm in the latter group.

8: The home button delay is there too, just like on the S2. This I didn't expect to go because it's by design. The delay is to allow the home button to be double pressed for waking up S-Voice.

9: You can't long press the notification toggles to access settings for those toggles. You couldn't do this on the S2 either but custom ROMs and themes allowed for this. Since Samsung adopted a lot of tweaks from S2 custom ROMs I would have expected them to adopt this too as it gives quicker access to settings for specific things instead of having to go through the main Settings menu each time.

10: On my dad's handset the screen had a redder tint compared to my S2. Now here's the thing, I think this is the S2 panel lottery scenario at play here again. Some screens have varying amounts of tint toward a certain colour compared to other handsets. My dad's S2 has a screen that's more blue than mine, for example whereas mine is closer to natural daylight white (6500K). I reckon the S3 is going to be exactly the same here. Without putting phones side by side you'd never tell the difference though unless you're used to using a certain colour tone on a screen for years on end or something I guess. I'll be able to confirm this theory once I put his S3 next to mine later this month.

Now the good stuff.

1: Camcorder exceeds expectations in all but one area, the microphone. The S2 microphones pick up more bass than the S3 one does recording video.

I suspect this is a media profile setting that can easily be modded on a custom ROM because this was certainly the case on the S2 before ICS rolled out which improved sound recording quality in the camcorder.

1b: Camcorder has manual touch focus which works very well:

2: Camera HDR mode works well too:

No HDR:

hdr_no.jpg

HDR:

hdr_yes.jpg

3: Wireless performance is sublime. On my S2 connected at 65Mbps I can FTP files to and from the phone at 2-3MB/s (write) and 3-4MB/s (read). This is on the 2.5GHz band as the 5GHz band is not fully supported.

On the S3 I was connected at 150Mbps and got:

Write:

swiftp_write.jpg

Read:

swiftp_read.jpg

4: S-Voice seems to work well and really quick although I suspect that's in part to my fast broadband connection :p I have a very British accent and had no trouble giving it commands and getting the correct results.

Works better than Siri in this regard and a heck of a lot better than the voice commander on the S2.

5: The speaker is about similar to the S2 I found. Maybe a bit louder actually but I haven't looked deep into this as I find the S2 one perfectly fine anyway.

6: The Wolfson sound chip is quite good.

I tested this hotswapping both headphones (Sennheiser HD595 and Phonak Aud?o PFE102) and chose to play some Flight Of The Conchords songs, specifically the Mutha'uckas track as it has some excellent guitar string starting off with a nice bass segment and then vocals.

On the S2 the bass is a bit louder, more boomiy I'd say, whereas on the S3 the sound was more relaxed and spacious and because of that I was able to pick out the instruments in the background better as well. Using the stock headphones or any normal pair of highstreet cans (lol Dr Dre Beats) people may not tell much difference really. Bottom line? Invest in good headphones!

7: Everything is smooth (already mentioned by others).

8: The screen is much nicer coming from the S2 (apart from the redder colour as mentioned earlier). It's got more onscreen when browsing and text is easily readable. I noticed no pixel issues from Pentile.

9: USB transfer seems blindingly quick. It's using MTP so Windows doesn't display the transfer speeds over that connection but all the camcorder videos I recorded and transferred to my PC seemed to transfer way quicker than they do on my S2 over the same connection.

10: Galaxy S2 owners who bought the Zenis desktop cradle are going to love this, the S3 is a perfect fit. Just use the rubber seat if you don't use a case on the S3 and remove it if you do. I don't know what 3rd party cases will work on this dock though but without the seat there's a few mm room to work with so all mesh case style cases I'd imagine will be just fine here. With the rubber seat attached, there is no sideways movement, it fits perfectly. you do need to use two hands to undock the phone though.

Pics of Zenis dock on are at the end of this post. You can buy the Zenis dock on eBay for about ?10 now you lucky buggers, I paid about ?31 for mine when I got the S2!

I have the black dock but my dad has the white one so he's chuffed to bits when I showed him this.

11: The material of the casing and general feel of the phone is excellent. feels as solid as the One X does but is a lot more comfortable to hold and to use, more than the S2 as well.

The back panel does attract more finger prints than the screen though.

12: Even though the screen is quite a bit larger than the S2, the S3 doesn't feel much bigger than the S2 at all, it feels smaller in fact due to the thinner profile. It's a bit taller but barely much wider.

13: The front of the S3 screen edge is bevelled and there are no areas that dust can collect like on the S2. Excellent!

14: Too early to comment on battery life but at 50% ish brightness I started using it at 88% and the battery dropped to 83% after a few hours of usage and testing. That's a lot better than my S2 using the extended 2000mAh battery.

That's about it for now and I think I have covered all the things that have yet to be covered in any online review but if anyone wants me to do any specific tests and whatnot then I'd be happy to comply.

I'll leave these pics right here...

IMG_9250.jpg

IMG_9253.jpg

IMG_9246.jpg

IMG_9244.jpg

IMG_9254.jpg

I look forward to my blue S3, and then rooting it... :p

UPDATE 2012.06.02 - Zenis dock with S3 attached to a case:

The first half was recorded using the S3 @ 720p, I've noticed that 720p mode is worse than the S2 in 720p but 1080p is way better.

Shame the video sound isn't as good as the S2 though but I'll be looking for a custom ROM update that ups the microphone gain and bitrate for camcorder audio in due time on my blue S3.

UPDATE 2012.06.08 - Comparison of my Pebble Blue and Marble White.

Now to end all questions regarding colours and shades :p

Yes, the home button on the blue is definitely blue/purple compared to the darker, almost black/brushed look in dim lighting whereas in normal or daylight it looks a pale shade of dark grey/black with a hint of blue under the glaze.

Both white and blue do have a different shade from an extreme angle from either side. The white is less obvious of course.

blue_white_comp1.jpg

blue_white_comp2.jpg

blue_white_comp3.jpg

blue_white_comp5.jpg

blue_white_comp4.jpg

I reckon this new blue is more of a tonic/metallic blue as opposed to the pebble blue which was definitely more purple/lighter blue.

I've applied the screen protector which came free with the Rock case and managed to get one or two air bubbles and it doesn't cover the entire front, there's 1mm or so margin around the edge, basically where the rounded bevel starts on the glass. So be wary when buying cheaper screen protectors.

The Zagg Invisible Shield covers the entire glass area nicely.

I'll post battery rundown thoughts from using my own phone, the white one is my dad's and he's a bit random as to usage :p Give me the weekend!

UPDATE 2012.06.09 - C-Pen Stylus review

I also received the - Samsung Galaxy SIII stylus (C-Pen) and here are my thoughts on it having used it in S-memo and Draw Something among other things.

c-pen.jpg

In S-Memo, the ability to change brush sizes and brush types makes the C-Pen quite useful for drawing and colouring but it's not as smooth or as fine tipped as the Galaxy note's S-Pen. It's capacitive of course and not pressure sensitive like the S-Pen. I wonder if the S-Pen will work on the S3, if not out the box then perhaps via a custom ROM...

Anyway, in Draw Something I found using my fingers was actually better due to the limited brush options available in the game. I found that drawing circles ended up a funny shape towards the end as the capacitive tip was too fat to be used as a fine liner or for detailed work in this kind of game.

All in all, I'd say it's a cool looking accessory and has its uses but apps need to add support for it with plenty of brush options otherwise you're better off using your finger, at least in Draw Something...for now :)

  • Like 6
Link to comment
https://www.neowin.net/forum/topic/1080657-samsung-galaxy-s3-gti9300/
Share on other sites

I've been up for a contract renewal for about a month now and it's hard not to upgrade from a Captivate when you see the GSG2 Skyrocket going on sale for 50 dollars. I'm using all my willpower to hold off until Samsung or AT&T announces the specs for the North American version of the SGS3. That way I can see if it's going to be worth paying full price (w/2 yr contract) or get a phone that's on sale.

Do you think it's worth getting the SGS3 if someone already has the SGS2?

You guys in the States will get the dual core LTE version too so I'll be looking forward to reading how you all find the performance and things on that!

Do you think it's worth getting the SGS3 if someone already has the SGS2?

If you're longing for better battery performance, better WiFi for true wireless file send/receive and a much nicer screen as well as the performance enhancements then I'd say yes! But if you're going above your initial budget by doing so then I'd say wait a month or two because the prices will no doubt come down.

If you can pick up a new S2 for really cheap then it's still a brilliant phone and will remain as such for a while yet :)

Could you add a pic from above so we can clearly see the difference in dimensions between the II and III?

Sure thing, I will shoot a pic a bit later on tonight as we have a L4D2 game scheduled shortly!

if you got the money to blow sure.

then again i only had mine for less then 6 months (nov '11)

intended to keep it for two years

It's not that I can't afford one, I just can't see spending 200-250 dollars on a phone when a really nice upgrade would be around 50 dollars. A dual core and a flash on the camera would be nice, but I don't game on my phone so it's not like I need tons of processing power. On the other hand, I went with the 2600k because I wanted the best quad core for my computer. I was willing to spend the money on that chip and many here would argue it's not worth it. It's all relative, I guess.

I am just trying to get an idea if it's going to be worth waiting for AND spending more, or just spending less now and getting a really nice phone with tons of dev support. :)

Thanks for the S2 on top of S3 picture as I kept trying to find one showing how much bigger the S3 is. Doesn't look like it's any wider (good) but just a "touch" longer which is also not so bad. Still gotta hold it though first but starting to want it more and more now and i'd probably get the International version again, screw "North American" versions and LTE - HSPA+ and WiFi is all I need :)

Then again if S4 version end up being better on battery life I might get that one instead just for that reason. Custom ROM will be able to turn OFF the LTE radio or portion as I'll never need/use it. AT&T has it around here but i'm not sure if i'd be allowed to use it since i'm on an MVNO of theirs anyways :)

It's not that I can't afford one, I just can't see spending 200-250 dollars on a phone when a really nice upgrade would be around 50 dollars. A dual core and a flash on the camera would be nice, but I don't game on my phone so it's not like I need tons of processing power. On the other hand, I went with the 2600k because I wanted the best quad core for my computer. I was willing to spend the money on that chip and many here would argue it's not worth it. It's all relative, I guess.

I am just trying to get an idea if it's going to be worth waiting for AND spending more, or just spending less now and getting a really nice phone with tons of dev support. :)

what i mean in other word

i think it is worthwhile , and tempting

but didn't feel like to burn 500$ too soon :p

afik, oft

<<< using i7 940 if you don't know , harrrrr track record ;)

Thanks for the S2 on top of S3 picture as I kept trying to find one showing how much bigger the S3 is. Doesn't look like it's any wider (good) but just a "touch" longer which is also not so bad. Still gotta hold it though first but starting to want it more and more now and i'd probably get the International version again, screw "North American" versions and LTE - HSPA+ and WiFi is all I need :)

Then again if S4 version end up being better on battery life I might get that one instead just for that reason. Custom ROM will be able to turn OFF the LTE radio or portion as I'll never need/use it. AT&T has it around here but i'm not sure if i'd be allowed to use it since i'm on an MVNO of theirs anyways :)

huh

you can already switch between radio techs

ahhhh or maybe it is just Cyanogen and i forgot about samsung toach**** (i learned to hate it :s ) :| ?

I forget which phone it was but I think it was on Verizon but there was no option to turn off LTE. So for people that live in an area without LTE even turned on at all they figured it might be a battery wasting thing to not have. Not sure if there's AT&T LTE here actually now that I think of it. Maybe turned on but not announced yet or something though. Prolly should check in the stores on their LTE devices to see what it says.

EDIT - Actually just did a google search and it's the AT&T version of the HTC One X that can't turn off LTE. There's no option in the menu. I'm guessing you can just use the *#*#4636#*#* to do it but most people don't know of that option.

thanks for the good review! i am still not in love with the s3 shape, but it looks much much better here than in pics ive seen before. and its ultra thin :D loving the docking station :)

Sorry no the dock is the one I bought for my S2, it fits the S3 just fine :)

It's ?6.50 on eBay, branded by Zenis.

The design of the S3 certainly grows on you though. The White one is not to my taste at all so my full thoughts and comparison will be when the blue one arrives. I'm also getting the wireless HDMI dongle and the C-Pen and Wireless charging pad at some point.

I mentioned about the button and led notification bleeding around the front of the phone, here's a picture showing the extend in a dark room. Note: This only affects the white S3, also other brands/models that are white, not just Samsung handsets :)

white_ledbleed.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
    • We check out the SKG PS700 Neck Massager by Steven Parker I was offered the chance to test out the SKG PS700 Neck Massager, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk; I figured it could offer some neck pain relief. What's in the box: SKG PS700-2 Neck Massager Rechargeable Battery (inside massager) Type-C USB cable User Manual Quick Start guide 1-Year Warranty In short, everything you need to get started. According to the official listing, here are the key features: Biomimetic Kneading & High Torque Motor: Designed with innovative biomimetic kneading heads that perfectly simulate the touch of human hands. Powered by a high-torque motor, this massager delivers powerful and precise deep tissue relief to effectively target stiff neck muscles and release built-up tension Soothing Heat & Integrated Sound Relaxation: Experience the ultimate Relaxationation with our dual-action approach. The soothing heat function gently warms your neck, while the built-in sound Relaxation provides calming audio tracks, helping you achieve a state of mindfulness and mental tranquility during your physical massage Cordless Convenience & Travel-Ready & Father's Day Gifts: Crafted for maximum portability and ease of use. Its lightweight, cordless design allows you to enjoy a premium massage anywhere without the hassle of tangled wires-whether you're taking a quick break at your desk or winding down at home Versatile Relief for Home & Office: An essential wellness companion for office workers, gamers, frequent travelers, or anyone looking to integrate mindfulness into their daily routine. It seamlessly fits into your lifestyle, providing instant neck relief whenever and wherever you need it Safe & Premium Materials: Manufactured with high-quality, skin-friendly materials to ensure a safe and comfortable experience without irritation. SKG backs this device with dedicated customer service, making it a thoughtful tech-health gift for family and friends App & Bluetooth Music Control: Connect via Bluetooth to control your massage settings through the dedicated app and enjoy your favorite music during your massage session for a fully customizable and immersive relaxation experience Red Light Warmth Technology: Features advanced red light warmth technology that penetrates deep into neck muscles to enhance blood circulation and provide soothing comfort while relieving muscle tension and stiffness Design With all that out of the way, here are my own findings. SKG does not say what materials are used to make the neck massager. However, on the product website, it mentions "soft-touch silicone" with what looks like PU leather cushioning, with the rest being mostly made up of plastics. On the inside of the massager, there are two "biomimetic kneading heads" that are motorized for the different styles of massage, which are not actually listed at all in the paper user manual, but the standard included modes are: De-stress mode, Mediation mode, Relax mode, Shiatsu mode. The massager looks quite premium and is actually very comfortable to wear. This massager is small and light enough to go anywhere, as it doesn't get in the way of anything, so I was able to use it in the chair while writing this review. Unlike the back massager, SKG does not warn in the user guide not to use it for more than 30 minutes a day (or two 15-minute sessions). However, there is a long laundry list of important safeguards to consider before and during the use of the device, and it is warned that the neck massager is not waterproof. It also includes a 1,400mAh battery with a rated power of 14W and input of 5V, which is the standard for up to USB 3.0 power (although the Amperage is not mentioned at all). SKG does not say how long it takes to charge, but a quick calculation at 2A (if that is what it is) would mean it would take roughly 1.5 hrs to charge from empty. In any case, the light around the button changes from orange to green on a full charge. In addition, it is not possible to use the device while it is charging. On the right of the neck massager is the On/Off and modes button, which also acts as a joystick. You can operate all the modes directly from the power button, as well as the app, which I'll get into a bit later: Push up: Short press to adjust Heat levels On/Off button: long press Mode Switching: Short press (while in operation) ➕ Push left: increase Music volume ➖ push right: decrease Music volume Push down: Short-press to turn Music on or off The massager defaults to De-stress mode, and it is not stated anywhere if the neck massager has overheat protection. This time around, regarding heat, the only detail I could find is that it has "triple action soothing heat." The temperature stages are not listed anywhere in the paper manual, Amazon listing, or official website. The heat levels can be adjusted through the app or directly on the device using the joystick button. Usage There's also the SKG Health app, which makes using the massager far easier than feeling around for the button on the side of your neck. If the app is stopped, you are required to log in with a verification code over email, which I am not too pleased with, as this means it will only work that way for however long SKG decides to support it through said app. However, I was not able to get the app to connect to the OS500, which I have reported back to my contact. Bluetooth appeared to be working on the neck massager as it became available to pair with my phone, but the SKG app failed to discover it. Before I forget, there's also a switch next to the USB charging port to deactivate and activate the Voice Prompt, which, when enabled, audibly tells the user when switching intensities, modes, or connecting to the app and informs when the massages start and are completed. That said, on to my likes and dislikes, which are listed below. What I didn't like Unable to connect the Neck Massager to the app Use through the mobile app relies on continued support from SKG What I liked Can be used without the app Cordless use Light and comfortable to wear Heat is also quite comfortable Where to buy: According to the official website, this has an MSRP of $249.99, but is currently $50 (on Amazon). To sweeten the deal a bit more, there's also an in-page coupon that knocks a further $20 off the price. SKG PS700-2 Neck Massager for $179.99 on Amazon (was $199.99) Apply the in-page $20 off coupon for the final price of $179.99 Just like the back massager, this gets a confused thumbs up (due to the cost). However, I cannot rate it through app usage as it failed to connect. As an Amazon Associate, we earn from qualifying purchases.
    • This Samsung T7 external SSD deal lasts less than a day by Sayan Sen Recently we had covered some nice deals of internal NVMe SSDs which include the 4TB TeamGroup G50 for only $400, the WD_BLACK SN7100 2TB for just $243, as well as the Samsung 990 PRO 1TB for $370. If however you require an external SSD for portability and quick data transfers and have a budget of less than $200 the Samsung T7 1TB model is currently on a limited time deal at just $190, it's lowest price in nearly three months. The deal ends today so you better hurry if you need one (purchase link below). The T7 weighs in at just 72 grams meaning it should be fairly easy to carry around helping in the portability department. Via its USB 3.2 Gen 2 interface the T7 promises sequential read speeds of up to 1050 MB/s and writes of 1000 MB/s. It is also fairly robust with a drop protection of up to 2 meters, though bear in mind that this is not waterproof. For that you will have to choose the rugged T7 Shield. The technical specifications of the Samsung T7 1TB are given in the table below: Specification Value Model Code (1TB) MU-PC1T0T / MU-PC1T0H Interface USB 3.2 Gen 2 (10 Gbps) Dimensions (W × H × D) 85 × 57 × 8 mm Weight 72 g Sequential Read Speed Up to 1,050 MB/s Sequential Write Speed Up to 1,000 MB/s Drop Resistance Up to 2 m (6.6 ft) Encryption AES 256-bit hardware encryption Operating Temperature 0°C to 60°C Non-Operating Temperature -40°C to 85°C Humidity 5% to 95% (non-condensing) Shock Resistance 1,500 G, duration 0.5 ms, 3-axis (non-operating) Vibration Resistance 20–2,000 Hz, 20 G (non-operating) Get it at the link below: Samsung T7 Portable SSD, 1TB External Solid State Drive, MU-PC1T0T/AM, Gray: $189.98 (Sold and Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!