Recommended Posts

This was the "next Gen" game right? I thought I read a headline saying someone had shown one. As far as what was demoed the controller looked to be the ps3 one.

This game looks bad ass and I plan to buy day 1.

No it's current gen, the press release thing Ubisoft put out states PC (DX11 lead), PS3 and Xbox 360. Wii U isn't mentioned, but I'd guess a release there as well?

No it's current gen, the press release thing Ubisoft put out states PC (DX11 lead), PS3 and Xbox 360. Wii U isn't mentioned, but I'd guess a release there as well?

Well ****, then that was a PC demo on a 360 pad. Got a closer look at the controller and saw the color layout of the buttons. I would hate to see to large of a difference on the consoles.

Well ****, then that was a PC demo on a 360 pad. Got a closer look at the controller and saw the color layout of the buttons. I would hate to see to large of a difference on the consoles.

I doubt there will be a large difference between the consoles. In fact Ubisoft is one of the better developers in making sure there games run stellar on the consoles IMO.

Case in point, all of the Assassins Creed footage they have shown this week has actually been on the PS3, the console that was once "notoriously bad" for developers, and just based on my experience with AC Revelations and the latest Ghost Recon Future Warrior, both of which I played on the PS3, I have the utmost of faith in Ubisoft and what they are able to accomplish on the consoles.

Well ****, then that was a PC demo on a 360 pad. Got a closer look at the controller and saw the color layout of the buttons. I would hate to see to large of a difference on the consoles.

The graphics looked better than what consoles are capable of. I would've be extremely surprised if it was running on an Xbox 360 or PS3. It's confirmed that the demo was running on a high-end PC (see here).

This is the interview referenced in the article:

  • 10 months later...
  • 1 month later...

http://blog.ubi.com/watch-dogs-multiplayer-e3-2013-preview/

 

 

 

Aiden Pearce will surprise you ? and not just for the obvious reasons. We captured some spectacular new Watch Dogs details in our E3 single-player reveal (See: Watch Dogs ? Sneaking, Jamming and a Grenade Launcher), but the biggest surprise of all is the multiplayer.We knew it was coming, but we had no idea that it had already begun. Ten minutes into a gameplay demo (chronicled in our other story), we see an alert on-screen saying Aiden is being hacked. Quickly, the number jumps to 14% infiltration, and Aiden must jump into action. He uses his Profiler app to search for whoever?s installing a virus onto his phone.

Looking around, we see blue X?s on everyone we profile, and the infiltration percentage continues to tick higher and higher. With time running out, Aiden hacks a camera to scan a wider range, and he spots a suspicious-looking NPC crouching in a nearby alley. Aiden sets off to stop him, a chase ensues, and then a firefight. In this particular demo, Aiden ends up shooting the hacker, thus stopping his malicious virus install.

And then the lights go up.

The lights, in this case, are from another room in our behind-closed-doors demo at E3 2013. Animation director Colin Graham, who was playing the game for us, points to his co-worker, also playing the game, now visible through a previously darkened window. That was no NPC, after all. This is Watch Dogs multiplayer in action.

 

Seems to run something along the lines of Demon's Souls.

  • 1 month later...

Is there some reason, perhaps just trying to impress onlookers with impressive graphics but.. to use a high end PC to show a console game???

 

Are they kidding? No wonder UBISOFT sucks so bad. They like to impress with pretty graphics but lousy game titles. look how bad Ghost Recon went.

 

I don't trust UBISOFT. they absolutely hate the PC crowd. Since Ghost recon 2001, We have never been dealt with on an honest level, kept in the dark, lied to, and they can't even patch the games to work. one patch may fix what was wrong with the game before then, that patch opens up a slew of new problems that have to be patched.

 

They can't even tell gamers after months of waiting, when the patch is coming or any updates. Ghost Recon:Future Soldier is a terrible port, lousy network coding for online play and issues that haven't been addressed since it released. At one point, they started using the same canned responses for reporting issues and PR

 

 

PR: we are sorry you're having issues and we have our developers actively working to fix the problem

  • 2 weeks later...

I'm confused. Is that bit at the end multiplayer?

As in the hacker was another player? If so, that is very cool.

 

Yeah the Hacker is another player. What my question is though, if there is a way you can turn that off. I don't want random people coming into my game. It's cool, but I think it will become very annoying. 

Yeah the Hacker is another player. What my question is though, if there is a way you can turn that off. I don't want random people coming into my game. It's cool, but I think it will become very annoying. 

 

I'm sure there will be. I don't think it'll be as unforgiving as Dark Souls and not let you switch it off.

If it works as well as it did in that video. It could be very cool.

This topic is now closed to further replies.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!