I'm always having THIS roblem...


Recommended Posts

In fact, each time I build a new PC, I'm always running into this very particuliar problem.

Upon the first bootnothing is showed... N bios promt no ****.

Every part has been tested on another computer and is connected at the right place.

Any idea?

Could be the mobo bios battery being new and not charged?

I've had this problem before, but when it happens to me the fans come on for a second and shut off. What i do is disconnect everything, vid car, ram, hard drives, everything, and go one by one and it works. This may sound stupid or retarded but it has worked for me and i've asked a few people who are technicians who have told me is not a bad choice, if anything is always good to make sure everything works before just jumping on and putting everything on.

In fact, each time I build a new PC, I'm always running into this very particular problem.

Upon the first bootnothing is showed... N bios promt no ****.

Every part has been tested on another computer and is connected at the right place.

Any idea?

Uhmm... this isn't all that specific. But maybe you can try connecting just the basic essentials: Keyboard, Monitor and electric. Leave all the PCI slots empty; have only the Graphics Card installed. Leave the I/O bus clear as well (USB, ect). No hard drives either. Try to get the machine to post and enter BIOS. Of nothing works, could be the power supply is bad, or the baseboard is busted. If it works, great. Install hardware ONE component at a time. IF the problem comes back, you can track it down far more efficiently. Good luck.

;)

I've had this problem before, but when it happens to me the fans come on for a second and shut off.  What i do is disconnect everything, vid car, ram, hard drives, everything, and go one by one and it works.  This may sound stupid or retarded but it has worked for me and i've asked a few people who are technicians who have told me is not a bad choice, if anything is always good to make sure everything works before just jumping on and putting everything on.

Beat me to it! ha-haa!!

Oh.. wait...

:blush:

New build PC that powers on but doesn't post?

1) Reseat the CPU

2) Assuming you got parts that are guaranteed compatible with each other, check the jumper settings on the mobo.

3) Strip the mainboard down to nothing but the essentials : Video, RAM, CPU.

4) Pull the mainboard out of the case and build it on the table or bench and retry.

In my experience building PC's (which is what I do all day every day where I work) , 9 out of 10 times you experience this, it's because you've mounted the CPU wrong or are grounding out the mainboard in the case.

Also, if this happens every time you build a new PC, maybe u should consider automotive work? ;)

Good luck!

Thanks you everyone for yur quick help. I will for sure try everything everyone has mention.

Well maybe I could give you the hardware I am trying to mount togheter.

7NJL4 Chaintech Motherboard

MSI GeFroce FX 5200 128 TDR

2 x Infineon 512 DDR PC2700 (PC333MHz)

1 x Major 40Gb 7200 RPM HD

1 x LG4040B DVD-Burner

350 Watt Enermax power sypply

I want to say that YEAH I am Arabic, BUT, it is ONLY my nationality. I'm not into any relegious "thing" either I am NOT in the favor of terrorist act!

Sorry for my bad enlish also.

chill man, no body said you were...

btw, you solverd that problem yet?

Well I am still at work right. I am currently gatering advice as much as possible before I go back home. 'cuz hey, I won't be able to use Internet at home until it's fixed! :(

Well but hey ho wait, I live like 5 minutes from where I work. Hehe yeah 5 minutes of walk! ;) I guess I could bring it here after work and try to fix it with some people online and the help I have gathered so far.

If anyone is willing to help me out "online", please feel free to add me to your msn contact list.

BTW, in my hardware description, I forgot to mention what's the CPU. It's a AMD Athon XP 3000+ Barton. Also it has Volcano 11+ to cool it. I didn't put the CPU Temp checker neither the Fan RPM Manager. Why? 'cuz it's AMD! You know, heat factor.

If its turning on, but not making it to bios post then it could be any number of things, but if you turn it on and the fans just turn a little then stop then something is grounding out, maybe loosen the screws holding down the motherboard (had that happen to me once)

If its turning on, but not making it to bios post then it could be any number of things, but if you turn it on and the fans just turn a little then stop then something is grounding out, maybe loosen the screws holding down the motherboard (had that happen to me once)

Well, one thing down. Hte fan doesn't stop after a while. It's simply spinning mad fast and don't stop.

Btw, I come to check this very thread every 20 minutes or so! ;)

Hey Neowin Mods--looks like whatever language Squiggly has as his name says this in a topic subscription email:

ﭘﺂשׂﺑ has just posted a reply to a topic that you have subscribed

EDIT: Which looks fine in Unicode, but in plain text it looks like this:

ﭘﺂשׂﺑ

Crazy!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm team Rossmann all the way. I have the exact same NVME, altough not in an array like him.
    • It had gone weeks ago. Although thinking about it I'm on the beta.
    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!